Description
GReddy 89-94 Nissan Skyline GTR Oil Cooler NS1010G/STD BNR32 Kit
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
GReddy 89-94 Nissan Skyline GTR Oil Cooler NS1010G/STD BNR32 Kit
GReddy 89-94 Nissan Skyline GTR Oil Cooler NS1010G/STD BNR32 Kit
Specification
| Weight | 12 kg |
|---|---|
| Dimensions | 17 × 17 × 8 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| brand | GReddy |
| part_number | 12024615 |
Related products
-
Utilizing CSF’s AC Condenser technology, their innovative dual-core in-series system features an additional 5 rows of super-high pressure multi-channel micro-tubes on the rear side of the oil cooler. The high performance tube spec, along with the high-efficiency multi-louvered fin design allows for maximum surface area contact and an approximate 40% increase in heat rejection. The High-Performance Race-Spec Oil Cooler directly replaces the factory unit, easily bringing engine oil temperatures down to a consistent and manageable level, even under extreme & extensive driving conditions.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your N55 Powered BMW hard on the street or track, a CSF Oil Cooler is the obvious choice.
The CSF #8145 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- “Drop-In Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting
- Requires Additional Half Quart for Proper Fill-up During Installation (OEM Cooler: 7 Qts./ CSF’s Upgrade Race-Spec N55 Oil Cooler: 7.5 Quarts)
- Secondary In-Series Backside Cooler has an Additional 5 Rows of Cooling for a 40% Increase in Heat Rejection
- Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube
- World’s 1st and Only True “Plug-And-Play” Upgraded Engine Oil Cooler for the BMW N55 Engine
- Converted to a Single-Pass Design with High Pressure Return Line for Optimal Flow
- High-Density Multi-Louvered Fin Design for Maximum Surface Area Contact
- Track Tested and Proven by Hittman Racing’s M235iR Endurance Race Car
- Innovative 2-Core In-Series System
-
BMW M drivers demand nothing but the best from and for their vehicles. While the F87 M2 (N55) is very capable on the street and track, it does suffer from heat issues in extreme conditions. Extensive track testing reveals the engine oil temps reaching upwards of 280? which will send the M2 into limp mode. The CSF Oil Cooler has been track tested in 103? (115 ? Heat Index) and keep the oil temps much lower than factory with a maximum temperature recorded at 240? throughout testing. The extra cooling performance is accomplished in a design that is a true “drop-in fit” requiring no modifications to install. It accepts all attaching oem components including oil-line connections, mounting brackets and shroud/ducting. This is accomplished by utilizing CSF’s AC Condenser Technology with a 1-Row super-high pressure 26mm multi-channel microtube. The front full-size core has 17 cooling tubes vs. oem 15 tubes while the backside cooler has an additional 6 rows. This also increases the overall oil volume of the system by 0.5 quarts (0.47 liters).
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your N55 F87 M2 hard on the street or track, a CSF Oil Cooler is the obvious choice.
The CSF #8104 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting
- Additional Half Quart of Oil Required for Proper Fill-up During Installation (OEM Cooler 7 Qts./CSF’s Upgraded Race-Spec M2 Oil Cooler Requires 7.5 Qts.)
- This is a Reduction from 275/280? Track Oil Temperatures (Limp Mode) When Testing with the Upgraded CSF Cooler on the Vehicle vs. the OEM Cooler
- World’s 1st and Only True “Plug-and-Play” Upgraded Engine Oil Cooler for the BMW N55 Engine in the BMW F87 M2 (2016+)
- Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube
- Track Tested in 103? (115 ? Heat Index) – Max. Oil Temperature Achieved 240?
- High-Density Multi-Louvered Fin Design for Maximum Surface Area Contact
- Secondary In-Series Backside Cooler has an Additional 6 Rows of Cooling
- Front Full-Size Core has 17 Cooling Tubes vs. OEM 15 Tubes
- Innovative 2-Core In-Series System
-
The 2006-2010 BMW E60 M5 combines the spacious practicality of a four-door sedan with a naturally aspirated V10 powerplant producing a hypnotic soundtrack of intake/exhaust noise. But after over a decade of use, some of the E60’s components have begun to show their age. The factory engine oil cooler is a common leak point on the E60, typically from failed O-rings or cracked weld points. In addition, the location of the front-mounted cooler increases the chance of damage from road debris and general clogging of external fins, resulting in reduced cooling efficiency. That, combined with the high-strung engine and hefty chassis, means oil temperatures tend to rise during aggressive driving. That’s why our engineering team set out to remedy both issues with this performance oil cooler. Drawing on our vast experience with BMW’s and the latest in engineering tools, our team was able to create a direct-fit replacement oil cooler with substantial improvements in both durability and cooling efficiency. The Mishimoto Performance Oil Cooler features a robust bar-and-plate core, which provides improved durability and aids in heat rejection. Our core utilizes a strategic fin design which provides a 41-percent increase in external fin surface area and a 30-percent increase in internal fin surface area to help draw heat out of the oil and dissipate it into the air. Our oil cooler features CNC-machined inlet/outlet ports and includes new OEM O-rings for a seamless and leak-free installation. This cooler is finished in a silver powder coat, ensuring long term durability and corrosion resistance. And, as with all our BMW performance products, this oil cooler includes our signature Mishimoto Lifetime Warranty.
High-performance engine oil cooler designed to regulate oil temperature and protect critical engine components. Efficient heat dissipation improves durability, maintains lubrication, and ensures reliable performance.- Replaces failure-prone factory oil cooler and provides improved cooling performance
- 40.3-percent increase in core volume for efficient cooling
- Fits 2006-2010 BMW E60 M5 / E63 M6 / E64 M6
-
When designing this new cooler, CSF wanted to ensure the best possible performance while ensuring the cooler was as durable as possible. As you’ve seen, oil coolers and other heat exchangers can take quite a beating over time. CSF utilizes an extremely rugged and durable Bar/Plate design which can stand up to far more abuse. The “Aero-Flow” Bar design reduces weight compared to other Bar/Plate designs while maintaining maximum strength and air-flow. These “Aero-Flow” bars improve heat dissipation with high density turbulated multi-louvered fins. Turbulation increases the turbulent flow through a tube, effectively increasing heat exchange rates and abilities. At around 50% larger in size, the CSF Oil Cooler increases both fluid capacity and core surface area. The overall performance of the Oil Cooler far exceeds the factory cooler’s limits. 100% All-Aluminum construction ensures the best performance and durability. In addition, the black powder coat finish provides extra protection and offers an OEM look behind the grille of your E30. Whether you are looking to build a track car, weekend warrior, or just upgrading your restoration project, the CSF Group A / DTM Race Style Oil Cooler is the best choice for your E30.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your BMW E30 hard on the street or track, a CSF Oil Cooler is the obvious choice.
The CSF #8218 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Comes complete with fitting kit for both OEM style as well as -10 AN male connections
- “Aero-Flow” Bar Lightweight Construction for Strength and Maximum Flow
- Satin Black Finish for Extreme Protection Against Corrosion and Debris
- Can fit all E30 Chassis (see applications and fitment notes)
- High Efficiency & Rugged Durability Bar/Plate Design
- Cast End Tanks with 100% Tig Welded Construction
- Group A / DTM E30 M3 Oil Cooler Design
- Direct fit oil cooler for BMW E30 M3
Reviews
There are no reviews yet.