GReddy 17+ Subaru BRZ/Toyota 86 10-Row Oil Cooler ZN6/ZC6 Kit (**Special Order**)

When designing this new cooler, CSF wanted to ensure the best possible performance with factory like fitment. This oil cooler is a truly unique design using CSF’s AC Condenser Technology. The 1-Row Super-High Pressure 32mm 10-Channel Microtube provides optimal oil flow and maximum surface area contact. By keeping the factory mounting location and relative dimensions, the factory ducting and shrouds are all reused with no modifications necessary. In addition, CSF added a rock guard to keep the cooler safe. You’ve no doubt heard horror stories about an OEM cooling getting punctured and spilling oil all over the road or track. Now you can feel safer and more confident that your oil system is safe from road debris.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your BMW G8X M3/M4/M2 hard on the street or track, a CSF Oil Cooler is the obvious choice.
The CSF #8266 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

• Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 32mm 10-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact
• Ideal for Road Racing, Drag Racing, and Vehicles With Increased Performance
• Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow
• Drop-in Fit Requires No Modifications to Install
• 8mm Tall Multi-Louvered Fin vs. OEM 6mm
• OEM Style Inlet/Outlet Connections
• 2-Year Limited Warranty

The engineers at CSF know cooling. So when it comes to keeping your power steering fluid temps in check as you push your E9X M3 hard on the street or track, the CSF PS Cooler is the obvious choice. While often overlooked, your power steering system can become quite annoying if it overheats. As power steering fluid boils it gets bubbles in the system leading to sloppy steering response and a noisy pump. On top of that, you will need to replace your power steering fluid if you let it overheat which is both annoying and an added cost.
The CSF E9X M3 Power Steering Cooler is approx 40% More Efficient than OEM Cooler. Designed to Work with any Aftermarket Supercharger, Heat Exchanger, or Auxiliary Coolers that may be Placed Underneath OEM-Positioned Power Steering Cooler.
The CSF #8041 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

• Increase in Unit Size (83mm or 3.27″ in Height) Designed Towards the Top of the Cooler from OEM Position. Allows the cooler to work with any Aftermarket Supercharger, Heat Exchanger, or Auxiliary Coolers that may be Placed Underneath.
• “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and AC Condenser
• Changes from OEM’s Low Efficiency Mechanically Bonded Core Design to CAB-Brazed High-Efficiency Plate-Type Design
• Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 18mm Wide 4-Channel Microtube
• Dual Pass 6-Row Design with an 83% Increase in Surface Area Compared to the OEM Unit
• World’s 1st True “Plug-and-Play” Power Steering Cooler for the E9X M3 Platform
• Lab Tested at approximately 40% More Efficient than OEM Cooler
• Replaces OEM Part Number: 17112282716