CSF 70-72 Porsche 914.6 / 70-76 Porsche 914 w/ Flat 6 Conversion Engine Oil Cooler

The engineers at CSF know cooling. So when it comes to keeping your transmission temps down as you push your F87 M2 hard on the street or track, the CSF Trans Cooler is the obvious choice. With an increase in cooling efficiency of around 30%, you can drive with confidence knowing you won’t be damaging your expensive transmission due to overheating.
CSF offers the best and most advanced Transmission Coolers on the market. Keeping your transmission temps down as you push your F87 M2 hard on the street or track.
The CSF #8103 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

• “Drop-in Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting
• World’s 1st and Only True “Plug-and-Play” Upgraded DCT Oil Cooler for the BMW N55 Engine in the BMW F87 M2 (2016-2018)
• Dual-Pass High Performance Core with 10 Cooling Tubes vs. OEM Single-Pass with Return Pipe 6-Tube Design
• Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube
• Lab Tested at approximately 30% More Efficient Than the OEM Cooler
• High-Density Multi-Louvered Fin Design

Utilizing CSF’s AC Condenser technology, their innovative dual-core in-series system features an additional 5 rows of super-high pressure multi-channel micro-tubes on the rear side of the oil cooler. The high performance tube spec, along with the high-efficiency multi-louvered fin design allows for maximum surface area contact and an approximate 40% increase in heat rejection. The High-Performance Race-Spec Oil Cooler directly replaces the factory unit, easily bringing engine oil temperatures down to a consistent and manageable level, even under extreme & extensive driving conditions.
CSF offers the best and most advanced Oil Coolers on the market. So when it comes to keeping your engine oil temps down as you push your N55 Powered BMW hard on the street or track, a CSF Oil Cooler is the obvious choice.
The CSF #8145 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

• “Drop-In Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting
• Requires Additional Half Quart for Proper Fill-up During Installation (OEM Cooler: 7 Qts./ CSF’s Upgrade Race-Spec N55 Oil Cooler: 7.5 Quarts)
• Secondary In-Series Backside Cooler has an Additional 5 Rows of Cooling for a 40% Increase in Heat Rejection
• Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube
• World’s 1st and Only True “Plug-And-Play” Upgraded Engine Oil Cooler for the BMW N55 Engine
• Converted to a Single-Pass Design with High Pressure Return Line for Optimal Flow
• High-Density Multi-Louvered Fin Design for Maximum Surface Area Contact
• Track Tested and Proven by Hittman Racing’s M235iR Endurance Race Car
• Innovative 2-Core In-Series System