Fabtech 07-18 Jeep JK 4WD 3in Basic Sys w/Dlss Shks

Fabtech offers the 3” Basic system. This system utilizes the factory coil springs with 3” steel coil spacers. With the vast array of cab and motor combinations found in the JK, utilization of the factory coil springs with this system ensures that the vehicle will receive a full 3” of lift to clear 35/1250R17 tires. This system includes a replacement Pitman Arm, front and rear Trac Bar relocation brackets, Sway Bar Links, front and rear Bump Stop mounts, gusset kit and more. Proper front end alignment is insured with this system due to the included adjustable alignment cams. Also included is a front driveshaft boot clamp kit to allow additional clearance between the front driveshaft and transmission during full suspension articulation. This system capitalizes on Jeep’s very capable factory suspension design with the benefit of additional Wheelwell clearance to run 35” tall tires for all around on and offroad performance. As an alternative to the factory small CV driveshafts we offer Heavy Duty units featuring large 1310 U-joints for increased strength. These driveshafts will directly replace the factory assemblies for use with the 3” Basic System. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.
Basic Lift System w/Shocks; w/DLSS Shocks; 3 in. Lift;
TIRE SIZE – 35/12.50R17 Wheel – 17X8 W/5″ BS W/MINOR TRIMMING; 148. EXHAUST SPACERS REQUIRED FOR ALL INSTALLATIONS ON 2012-CURRENT JEEP WRANGLERS; 249. FOR HEAVY OFFROAD USE, FRONT DRIVESHAFT IS REQUIRED. ORDER P/N FTS94057.; 250. FOR HEAVY OFFROAD USE, REAR DRIVESHAFT IS REQUIRED. SEE A QUALITY DRIVELINE SUPPLIER TO ORDER.

  • Everything You Will Need To Lift Your Vehicle
  • Designed For The Budget Minded Enthusiast
  • Utilizes The Stock Radius Arm

2,766.74 $

Out of stock
SKU K4037DL
brand Fabtech

Description

Fabtech offers the 3” Basic system. This system utilizes the factory coil springs with 3” steel coil spacers. With the vast array of cab and motor combinations found in the JK, utilization of the factory coil springs with this system ensures that the vehicle will receive a full 3” of lift to clear 35/1250R17 tires. This system includes a replacement Pitman Arm, front and rear Trac Bar relocation brackets, Sway Bar Links, front and rear Bump Stop mounts, gusset kit and more. Proper front end alignment is insured with this system due to the included adjustable alignment cams. Also included is a front driveshaft boot clamp kit to allow additional clearance between the front driveshaft and transmission during full suspension articulation. This system capitalizes on Jeep’s very capable factory suspension design with the benefit of additional Wheelwell clearance to run 35” tall tires for all around on and offroad performance. As an alternative to the factory small CV driveshafts we offer Heavy Duty units featuring large 1310 U-joints for increased strength. These driveshafts will directly replace the factory assemblies for use with the 3” Basic System. Includes front and rear 2.25 Dirt Logic Stainless Steel shocks.
Basic Lift System w/Shocks; w/DLSS Shocks; 3 in. Lift;
TIRE SIZE – 35/12.50R17 Wheel – 17X8 W/5″ BS W/MINOR TRIMMING; 148. EXHAUST SPACERS REQUIRED FOR ALL INSTALLATIONS ON 2012-CURRENT JEEP WRANGLERS; 249. FOR HEAVY OFFROAD USE, FRONT DRIVESHAFT IS REQUIRED. ORDER P/N FTS94057.; 250. FOR HEAVY OFFROAD USE, REAR DRIVESHAFT IS REQUIRED. SEE A QUALITY DRIVELINE SUPPLIER TO ORDER.

  • Everything You Will Need To Lift Your Vehicle
  • Designed For The Budget Minded Enthusiast
  • Utilizes The Stock Radius Arm

Specification

air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Y

part_type

automotive

epa

N/A

carb_acknowledgement_required

false

regular_stock

false

units_per_sku

1

brand

Fabtech

part_number

K4037DL

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *