0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Vibrant Horizontal Flow Intercooler Core 24in Wide x 7.75in High x 3in Thick

Vibrant Performance Vertical Flow Air to Air Intercooler Cores feature Bar and Plate construction and a unique louvered fin design on the ambient path that maximizes the core’s available surface area, and an offset fin design on the charge path allows for minimal pressure loss.
Vertical Flow Intercooler Core; 24 in. Core Width; 3 in. Core Thickness; 7.75 in. Height; 6061 Aluminum;

  • Core Thickness 3.000 in.
  • Air To Air Intercoolers
  • Material 6061 Aluminum
  • Core Width 24.000 in.
  • Height 7.750 in.

390.24 $

SKU 12920
brand Vibrant
Add to wishlist Add to compare

Description

Vibrant Performance Vertical Flow Air to Air Intercooler Cores feature Bar and Plate construction and a unique louvered fin design on the ambient path that maximizes the core’s available surface area, and an offset fin design on the charge path allows for minimal pressure loss.
Vertical Flow Intercooler Core; 24 in. Core Width; 3 in. Core Thickness; 7.75 in. Height; 6061 Aluminum;

  • Core Thickness 3.000 in.
  • Air To Air Intercoolers
  • Material 6061 Aluminum
  • Core Width 24.000 in.
  • Height 7.750 in.

Specification

Weight 14.1 kg
Dimensions 25.9 × 9.4 × 4.7 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

N
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
brand

Vibrant
part_number

12920

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 46-20609-B

    aFe Bladerunner 2.75in Aluminum Cold Charge Pipe Black VW GTI (MKVIII) 22-23 L4-2.0L (t)

    No Reviews

    Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.
    BladeRunner 3 IN Aluminum Cold Charge Pipe Black Volkswagen GTI (MKVIII) 22-25 L4-2.0L (t)

    • Directly replace your VW’s restrictive plastic intercooler tubes with aFe POWER BladeRunner free-flowing, heat-resistant aluminum tubes.
    • Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
    • 1/8″ NPT Port is Provided for Connecting Sensors or Water Methanol Injection
    • Powder Coated Wrinkle Black for Heat and Corrosion Resistance
    • TIG-Welded 2-3/4″ Aluminum Pipe
    • No modifications needed
    383.40 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 46-20415-B

    aFe 15-20 VW GTI Charge Pipe Kit

    No Reviews

    Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side intercooler tube. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe power logo for a custom look.
    BladeRunner Aluminum Hot and Cold Charge Pipe Kit Black w/ Turbo Muffler Delete Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)

    • Directly replace the restrictive plastic intercooler tubes with the BladeRunner free-flowing, heat-resistant aluminum tubes.
    • Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
    • Includes an Oversized Two-Piece 2-1/4” Billet Aluminum Turbo Muffler Delete
    • 1/8″ NPT Ports Provided for Connecting Sensors or Water Methanol Injection
    • TIG-Welded 2-1/2″ Hot Side and 2-3/4″ Cold Side Aluminum Tubes
    • Powder Coated Wrinkle Black for Heat and Corrosion Resistance
    • Dyno-Proven Gains of +23 HP and +28 Lbs. x Ft. TQ
    • Outflows Factory Tubes by 34%
    795.56 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 8109

    CSF 12-16 BMW M5 (F10) / 12-18 BMW M6 (F06/F12/F13) Twin Charge-Air-Cooler Set – Crinkle Black

    No Reviews

    The S63 4.4L Twin Turbo V8 in the BMW F1X M5/M6 is an absolute monster that responds incredibly well to bolt-on upgrades, larger turbos, and performance tuning. Tuners quickly found that increasing power on the S63 pushed charge air temperatures past the OEM Charge-Air-Coolers’ limits resulting in dangerously high Intake Air Temperatures (IATs). Pure turbos approached CSF to develop a Charge-Air-Cooler upgrade that would hold up to the extreme boost levels their turbos upgrades could generate and keep the car’s IATs in check. The result was the World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the F1X M5/M6. CSF used CFD analysis and testing to create the largest charge-air-cooler that could fit in the factory location. The Top/Bottom, Cross-Flow, Dual-Pass Cores are 28% larger than the factory coolers and offer significant reductions in IATs at increased boost levels.
    The CSF Charge-Air-Coolers boast a 28% larger core size than factory per side. This greatly increases the capacity for heat transfer from the hot charge air from your F1X’s Turbos.
    The CSF #8109 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Finished with a Professional “Crinkle Black” Powder-Coated Finish (CSF #8109), Also Available in Raw Aluminum Finish with Option for Custom Powder-Coating Available (Inquire for More Details on Lead Time and Pricing)
    • “Drop-In Fit” Design for an Easy & Quick Plug-and-Play Installation ­- Complete with OEM-Style “Quick Connect” Water Connections and Sensor Ports
    • Top/Bottom, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction
    • Custom Designed CSF Liquid-To-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
    • Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
    • World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the BMW F1X M5/M6
    • 28% Increase in Core Size Per Each Charge Cooler Compared to the OEM Charge Air Coolers
    • Additional E85/Methanol Injection Ports Built into the Cast End Tank Design
    • Lifetime Warranty
    2,326.44 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 8115

    CSF 15-18 BMW M2 (F30/F32/F22/F87) N55 High Performance Stepped Core Bar/Plate Intercooler – Silver

    No Reviews

    The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design. In testing the CSF Intercooler showed Intake Air Temperatures (IATs) that were 38 deg F (21 deg C) lower than factory after just 3 consecutive pulls from 4k RPM to 5.8K RPM. In that test, the CSF Intercooler maintained stable IATs. While most intercoolers don’t offer immediate performance gains without increasing boost pressure, the CSF Intercooler shows an increase of 15-20hp on stock N55 Powered BMW’s and 25+hp on modified examples.
    The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
    The CSF #8115 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Stepped Core Design for Maximum Surface Area Contact and Internal Intake Air Flow Volume – Largest “Drop-in Fit” Intercooler Available in the Industry
    • “Drop-in Fit” Design for an Easy & Quick Plug-and-Play Installation – Complete with OEM-Style “Quick Connect” Inlet/Outlet Connections
    • Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
    • 40’F Drop in Temperatures When Compared to the OEM Intercooler After Multiple Repeated Runs
    • Rounded Front Face Bar/Plate Design for Optimized Air Flow Through the Core
    • Power Increase of 15-20 HP on Stock Cars, 25+ HP on Modified Vehicles
    • Fully Reversible Back to OEM Spec with No Modifications Needed
    • Lab Tested in CSF’s In-House Wind Tunnel
    • Lifetime Warranty
    683.28 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com