Description
PERRIN 15-21 Subaru WRX/STI Front Mount Intercooler Bracket – Black
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
PERRIN 15-21 Subaru WRX/STI Front Mount Intercooler Bracket – Black
PERRIN 15-21 Subaru WRX/STI Front Mount Intercooler Bracket – Black
Specification
| Weight | 3.5 kg |
|---|---|
| Dimensions | 12.2 × 4.8 × 2.9 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| regular_stock | t |
| units_per_sku | 1 |
| upc | PSP-ITR-438-1 |
| brand | Perrin Performance |
| part_number | PSP-ITR-438-1 |
Related products
-
CSF 04-13 BMW 335i/xi (E90/E91/E92/E93) High Performance Stepped Core Bar/Plate Intercooler – Silver
The OEM intercooler is made from plastic end tanks that are crimped onto an aluminum tube/fin core that is 4 inches thick (105mm core width) and is 5 inches in height (127mm). This may be enough to keep IAT’s in check on a completely unmodified / stock vehicle, but once users to start increase power through bolt-on modifications, tuning, and built engines, the OEM intercooler will become the Achilles Heel of the system with IAT’s skyrocketing out of the optimal range and drastically lowering the performance capabilities of the vehicle. Enter CSF with their stepped core design, bar/plate high performance N54 intercooler. This “drop-in fit” intercooler, which requires no modifications to install, has a bottom / larger section that is 5.5in thick (140mm) with a front face that is massive 8.25in tall (210mm). Made from CSF’s industry exclusive rounded bar/plate core design. The rounded front face of the cooling bars allows for better airflow into the core. Airflow hits the core surface, and rather than scattering like it does with hitting the face of a flat bar that all competing products have, it travels around the face of the round bar and into core for much better performance than both the OEM design (flat face) and all other aftermarket competitors (all have flat face tubes or bars). A huge improvement over the OEM unit, and enough to handle even the most advanced N54 engine builds. Good for 1000hp no problem!
The CSF N54 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
The CSF #8127 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Clears OEM Crash Bar, No Modification to Install with No Cutting or Trimming Required
- No Cheaper Silicone Hose Clamp System, BMW Style “Quick-Connect” Machined Fittings
- OEM Mounting Locations with Fitment Kit and Instructions Included
- The Only TRUE Plug-and-Play Solution Compared to the Rest
- Bottom/Larger: Section: 5.5″ Thick (140mm)
- Massive Front Face: 8.25″ Tall (210mm)
- Good for Over 1000 HP!
-
Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines with our Performance Intercooler specifically designed for the F22/F30 chassis. Our unique 6? thick step-core design, adds a 115? angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as we engineered our intercooler with a bar-and-plate construction optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, our features were able to drop intercooler outlet temperatures by 45?F, and add 10 whp and 8 wtq all on the stock tune of our 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in Silver or Black and also includes the Mishimoto Lifetime Warranty.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- 6-in thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers
- Max power gains of 10 whp and 8 wtq on stock tuning
- Patent Pending
-
End Tanks: The unique BladeRunner end tanks are constructed out of 3/16″ thick aluminum plates and include two 1/8″ NPT ports for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Mandrel-bent Tubing: Constructed of 2-1/2″ to 3″ mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tubes from engine heat and protects them from corrosion. aFe Badging: Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style. Perfect Fit: Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.
BladeRunner GT Series Intercooler Kit w/ Tubes Black BMW 335i (F30) 12-15/ M235i (F22/23) 14-16 L6-3.0L (t) N55 A/T- Retains Factory Style Throttle Body And Intercooler Quick Connect
- Incorporates Factory Style Quick Conn. For Intercooler Tubes
- 100% TIG-Welded For Strength And Durability
- 5 Ply Silicone Coupling For Strength
- Outflows Factory Intercooler by 21%
- Powdercoat For Heat Resistance
- Lowers Intake Air Temperature
- No Cutting Or Drilling Needed
-
CSF 2019+ Lamborghini Urus / 2020+ Audi RS Q8 / SQ8 / SQ7 High Performance Intercooler System- Black
The intercooler cores are spec’d out by CSF and custom built by PWR. Featuring two rows of rolled cooling tubes with inner fins, these cores make for the most efficient intercoolers available. Because of this, they are able to eliminate heat soak and lower IATs much more efficiently than traditional Bar & Plate or Tube & Fin designs. This gives us maximum performance for extended periods of time under demanding driving conditions and for vehicles with increased power levels through modifications and tuning.
The CSF by PWR Urus/RS Q8 Twin Intercooler Set features Formula-1 grade cores which offer the greatest reduction in IATs and help eliminate heat soak. The Billet Aluminum construction offers the greatest strength and durability possible.
The CSF #8211 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Eliminates Heat Soak and Lower Intake Air Temperatures (IAT) for Maximum Performance in High-Performance and Race Conditions
- Finished in CSF’s Thermal Dispersion Ceramic Coating (Available in Raw Finish with no coating – CSF #8211R)
- Formula-1 Performance Grade Cores by PWR (2-Row Cores features Rolled Tubes w/ Inner Fins)
- Integrated 1/8th NPT Port with plug on lower outlet tank for Water-Methanol Injection
- True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
- 100% TIG Welded vs OEM Crimped Plastic End Tanks for Maximum Strength & Durability
- 1-Piece Welded Charge Pipe vs OEM Bolt-On Pipe w/ O-Ring (known failure point)
- OEM Style Inlet/Outlet Connections for Precise Fitment With All OEM Components
- R&D and Performance Testing by Pacific German & VF Engineering
- Sold as a pair (Left & Right Intercoolers)
- Made in the USA at PWR North America
- CNC Machined Billet End Tanks
Reviews
There are no reviews yet.