Description
CSF BMW M2/M3/M4 S58 (G8X) Charge-Air Cooler Manifold – Carbon Ceramic Gold Matte
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
CSF BMW M2/M3/M4 S58 (G8X) Charge-Air Cooler Manifold – Carbon Ceramic Gold Matte
CSF BMW M2/M3/M4 S58 (G8X) Charge-Air Cooler Manifold – Carbon Ceramic Gold Matte
Specification
| Weight | 26 kg |
|---|---|
| Dimensions | 26 × 18 × 16 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| units_per_sku | 1 |
| brand | CSF |
| part_number | 8233CCGM |
Related products
-
The S55 suffers heavily from heat soak. Many tuners witnessed this early on after doing multiple dyno pulls and seeing significant drops in power after each consecutive pass. Many F8X owners experienced the same loss of power on the track as the engine just could not cool off during laps. The solution is two fold: The Charge-Air-Cooler (CSF #8082/8082R) & Front Mount Heat Exchanger (CSF #8075/8075V) work together to keep the intake temps down and power up. The factory units simply cannot dissipate enough heat to keep up with prolonged performance driving. CSF’s Charge-Air-Cooler boasts a core size that is 60% larger, greatly increasing the capacity for heat transfer from the hot charge air coming from the turbos. Paired with the Front Mount Heat Exchanger the system is able to maintain lower intake temps and keep your BMW F8X’s power up.
The CSF Charge-Air-Cooler boasts a 60% larger core size than factory, greatly increasing the capacity for heat transfer from the hot charge air. Paired with the CSF Heat Exchanger (CSF #8075) the system is able lower your F8X’s IATs.
The CSF #8082 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Multiple Air Dividers Cast Into Both Hot/Cold Side Endtanks for Optimized Air Flow Through the Custom Designed CSF Liquid-to-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
- Left/Right, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction (vs. OEM Single-Pass Vertical-Flow Design)
- Finished with a Professional “Crinkle Black” Powder-Coated Finish (Available in Raw Aluminum with Option for Custom Powder-Coating – CSF #8082R)
- “Drop-in Fit” Design for an Easy & Quick Plug-and-Play Installation, Complete with OEM-Style “Quick-Connect” Water Connections and Sensor Ports
- World’s 1st Cast Endtank Designed Top Mount Charge-Air-Cooler for the BMW S55 Engine in the BMW F80 M3, F82/F83 M4, and F87 M2 Competition
- Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
- 60% Increase in Core Size Compared to the OEM Cooler
- Lifetime Warranty
-
Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side intercooler tube. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe power logo for a custom look.
BladeRunner Aluminum Hot and Cold Charge Pipe Kit Black w/ Turbo Muffler Delete Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)- Directly replace the restrictive plastic intercooler tubes with the BladeRunner free-flowing, heat-resistant aluminum tubes.
- Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
- Includes an Oversized Two-Piece 2-1/4” Billet Aluminum Turbo Muffler Delete
- 1/8″ NPT Ports Provided for Connecting Sensors or Water Methanol Injection
- TIG-Welded 2-1/2″ Hot Side and 2-3/4″ Cold Side Aluminum Tubes
- Powder Coated Wrinkle Black for Heat and Corrosion Resistance
- Dyno-Proven Gains of +23 HP and +28 Lbs. x Ft. TQ
- Outflows Factory Tubes by 34%
-
The S63 4.4L Twin Turbo V8 in the BMW F1X M5/M6 is an absolute monster that responds incredibly well to bolt-on upgrades, larger turbos, and performance tuning. Tuners quickly found that increasing power on the S63 pushed charge air temperatures past the OEM Charge-Air-Coolers’ limits resulting in dangerously high Intake Air Temperatures (IATs). Pure turbos approached CSF to develop a Charge-Air-Cooler upgrade that would hold up to the extreme boost levels their turbos upgrades could generate and keep the car’s IATs in check. The result was the World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the F1X M5/M6. CSF used CFD analysis and testing to create the largest charge-air-cooler that could fit in the factory location. The Top/Bottom, Cross-Flow, Dual-Pass Cores are 28% larger than the factory coolers and offer significant reductions in IATs at increased boost levels.
The CSF Charge-Air-Coolers boast a 28% larger core size than factory per side. This greatly increases the capacity for heat transfer from the hot charge air from your F1X’s Turbos.
The CSF #8109R Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Finished with a Professional “Crinkle Black” Powder-Coated Finish (CSF #8109), Also Available in Raw Aluminum Finish with Option for Custom Powder-Coating Available (Inquire for More Details on Lead Time and Pricing)
- “Drop-In Fit” Design for an Easy & Quick Plug-and-Play Installation - Complete with OEM-Style “Quick Connect” Water Connections and Sensor Ports
- Top/Bottom, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction
- Custom Designed CSF Liquid-To-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
- Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
- World’s 1st Cast End Tank Designed High-Performance Charge-Air-Cooler Set for the BMW F1X M5/M6
- 28% Increase in Core Size Per Each Charge Cooler Compared to the OEM Charge Air Coolers
- Additional E85/Methanol Injection Ports Built into the Cast End Tank Design
- Lifetime Warranty
-
The same intercooler cores used in this application are the same style used in other CSF air-to-air systems developed for the Urus/RS Q8/Cayenne Turbo, Audi RS6/RS7, and Porsche 992 Turbo/S, with incredible results. These cores eliminate heat soak and lower Intake Air Temperatures (IATs) much more efficiently than traditional Bar & Plate designs. This gives us maximum performance for extended periods of time under demanding driving conditions and in vehicles with increased power levels through modifications and tuning. The 4.0L twin-turbo V8 in the SQ7/SQ8 starts to experience debilitating heat soak and progressively increasing IATs with the OEM intercoolers. This results in the ECU pulling engine timing and drastically decreasing power output. The CSF by PWR Intercoolers solve this issue and allow vehicles to perform at optimal levels consistently and for prolonged periods of time.
The CSF by PWR SQ7/SQ8 Twin Intercooler Set features Formula-1 grade cores which offer the greatest reduction in IATs and help eliminate heat soak. The Billet Aluminum construction offers the greatest strength and durability possible.
The CSF #8280 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.- Eliminates Heat Soak and Lower Intake Air Temperatures (IAT) for Maximum Performance in High-Performance and Race Conditions
- Raw Billet Aluminum Finish (CSF #8280) – Available in Thermal Dispersion Cerakote (CSF #8280B)
- Formula-1 Performance Grade Cores by PWR (2-Row Cores features Rolled Tubes w/ Inner Fins)
- 100% TIG Welded vs OEM Crimped Plastic End Tanks for Maximum Strength & Durability
- True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications
- 1-Piece Welded Charge Pipe vs OEM Bolt-On Pipe w/ O-Ring (known failure point)
- OEM Style Inlet/Outlet Connections for Precise Fitment With All OEM Components
- Sold as a pair (Left & Right Intercoolers)
- Made in the USA at PWR North America
- Performance Testing by Unitronic
- CNC Machined Billet End Tanks
Reviews
There are no reviews yet.