0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

aFe Bladerunner Intercooler w/ Tubes 11-13 BMW 335i L6-3.0L (tt) N55

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2011-2013 BMW 335i (E9X) L6-3.0L (t) N55 engines, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing this intercooler kit outflows factory tube and fin core designs, showed gains up to +12 horsepower and +12 lbs. x ft., also dropping the intake air temperature by 12 degrees without any type of tune. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16 aluminum plates and include two 1/8″ NPT ports are provided for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. This intercooler also features 2-1/2″ inlet/outlet connections compatible with stock hot site intercooler tube. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Fits aFe’s intercooler tube upgrade kit (46-20249-B).
BladeRunner GT Series Intercooler Kit w/ Tubes Black BMW 335i (E9X) 11-13 L6-3.0L (t) N55

  • Incorporates Factory Style Quick Connections For Tubes
  • 5 in. Bar And Core Design 29% Larger than Stock
  • 12 Degree Temperature Drop w/out Any Tuning
  • Up To +12 HP/+12 ft./lbs. Torque Max Gains
  • 1/8 in. NPT Ports On Intercooler And Tube
  • No Cutting Or Modifications Are Needed
  • 2.5 in. Billet Aluminum Intake/Outlet
  • 100% TIG Welded

2,814.93 $

Out of stock
SKU 46-20242-B
brand aFe

Description

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2011-2013 BMW 335i (E9X) L6-3.0L (t) N55 engines, this BladeRunner intercooler utilizes a 5″ bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16″ TIG-Welded end tanks offer superior strength and durability. In testing this intercooler kit outflows factory tube and fin core designs, showed gains up to +12 horsepower and +12 lbs. x ft., also dropping the intake air temperature by 12 degrees without any type of tune. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16 aluminum plates and include two 1/8″ NPT ports are provided for sensors or water-methanol injection. 5″ Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. This intercooler also features 2-1/2″ inlet/outlet connections compatible with stock hot site intercooler tube. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Fits aFe’s intercooler tube upgrade kit (46-20249-B).
BladeRunner GT Series Intercooler Kit w/ Tubes Black BMW 335i (E9X) 11-13 L6-3.0L (t) N55

  • Incorporates Factory Style Quick Connections For Tubes
  • 5 in. Bar And Core Design 29% Larger than Stock
  • 12 Degree Temperature Drop w/out Any Tuning
  • Up To +12 HP/+12 ft./lbs. Torque Max Gains
  • 1/8 in. NPT Ports On Intercooler And Tube
  • No Cutting Or Modifications Are Needed
  • 2.5 in. Billet Aluminum Intake/Outlet
  • 100% TIG Welded

Specification

Weight 60 kg
Dimensions 32 × 22 × 13 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

802959464410
brand

aFe
part_number

46-20242-B

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 46-20417-R

    aFe 15-19 VW GTI Turbocharger Inlet Pipe – Red

    No Reviews

    aFe POWER BladeRunner turbo muffler delete pipe replaces the factory turbo muffler located between the turbo compressor outlet and the hot side charge pipe. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This turbo muffler delete kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and a heavy-duty, 5-ply, polyester reinforced silicone coupling for superior strength and durability. Finished with Red Anodizing and a unique laser-etched aFe Power logo for a custom look. Designed to work with the OE charge pipes only. this item will only work with aFe POWER charge pipe PN: 46-20414-B.
    BladeRunner Turbo Muffler Delete for aFe Charge Pipe Red Volkswagen GTI (MKVII) 15-21 L4-2.0L (t)

    • Maximize your flow through your aFe Power Charge Pipes with the BladeRunner billet aluminum turbo muffler delete.
    • Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Coupling
    • Includes an Oversized Two-Piece 2-1/4” Billet Aluminum Turbo Muffler Delete
    • Dyno-Proven Gains of +8 HP and +10 Lbs. x Ft. TQ
    • For Use With aFe Charge Pipe Kit (46-20414-B)
    • Anodized Red for Corrosion Resistance
    • Outflows factory turbo muffler by 7%
    265.46 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 8115

    CSF 15-18 BMW M2 (F30/F32/F22/F87) N55 High Performance Stepped Core Bar/Plate Intercooler – Silver

    No Reviews

    The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design. In testing the CSF Intercooler showed Intake Air Temperatures (IATs) that were 38 deg F (21 deg C) lower than factory after just 3 consecutive pulls from 4k RPM to 5.8K RPM. In that test, the CSF Intercooler maintained stable IATs. While most intercoolers don’t offer immediate performance gains without increasing boost pressure, the CSF Intercooler shows an increase of 15-20hp on stock N55 Powered BMW’s and 25+hp on modified examples.
    The CSF N55 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
    The CSF #8115 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Stepped Core Design for Maximum Surface Area Contact and Internal Intake Air Flow Volume – Largest “Drop-in Fit” Intercooler Available in the Industry
    • “Drop-in Fit” Design for an Easy & Quick Plug-and-Play Installation – Complete with OEM-Style “Quick Connect” Inlet/Outlet Connections
    • Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
    • 40’F Drop in Temperatures When Compared to the OEM Intercooler After Multiple Repeated Runs
    • Rounded Front Face Bar/Plate Design for Optimized Air Flow Through the Core
    • Power Increase of 15-20 HP on Stock Cars, 25+ HP on Modified Vehicles
    • Fully Reversible Back to OEM Spec with No Modifications Needed
    • Lab Tested in CSF’s In-House Wind Tunnel
    • Lifetime Warranty
    689.91 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 8082

    CSF 2014+ BMW M3/M4 (F8X) Top Mount Charge-Air-Cooler – Crinkle Black

    No Reviews

    The S55 suffers heavily from heat soak. Many tuners witnessed this early on after doing multiple dyno pulls and seeing significant drops in power after each consecutive pass. Many F8X owners experienced the same loss of power on the track as the engine just could not cool off during laps. The solution is two fold: The Charge-Air-Cooler (CSF #8082/8082R) & Front Mount Heat Exchanger (CSF #8075/8075V) work together to keep the intake temps down and power up. The factory units simply cannot dissipate enough heat to keep up with prolonged performance driving. CSF’s Charge-Air-Cooler boasts a core size that is 60% larger, greatly increasing the capacity for heat transfer from the hot charge air coming from the turbos. Paired with the Front Mount Heat Exchanger the system is able to maintain lower intake temps and keep your BMW F8X’s power up.
    The CSF Charge-Air-Cooler boasts a 60% larger core size than factory, greatly increasing the capacity for heat transfer from the hot charge air. Paired with the CSF Heat Exchanger (CSF #8075) the system is able lower your F8X’s IATs.
    The CSF #8082 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Multiple Air Dividers Cast Into Both Hot/Cold Side Endtanks for Optimized Air Flow Through the Custom Designed CSF Liquid-to-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
    • Left/Right, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction (vs. OEM Single-Pass Vertical-Flow Design)
    • Finished with a Professional “Crinkle Black” Powder-Coated Finish (Available in Raw Aluminum with Option for Custom Powder-Coating – CSF #8082R)
    • “Drop-in Fit” Design for an Easy & Quick Plug-and-Play Installation, Complete with OEM-Style “Quick-Connect” Water Connections and Sensor Ports
    • World’s 1st Cast Endtank Designed Top Mount Charge-Air-Cooler for the BMW S55 Engine in the BMW F80 M3, F82/F83 M4, and F87 M2 Competition
    • Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
    • 60% Increase in Core Size Compared to the OEM Cooler
    • Lifetime Warranty
    2,343.47 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 8127

    CSF 04-13 BMW 335i/xi (E90/E91/E92/E93) High Performance Stepped Core Bar/Plate Intercooler – Silver

    No Reviews

    The OEM intercooler is made from plastic end tanks that are crimped onto an aluminum tube/fin core that is 4 inches thick (105mm core width) and is 5 inches in height (127mm). This may be enough to keep IAT’s in check on a completely unmodified / stock vehicle, but once users to start increase power through bolt-on modifications, tuning, and built engines, the OEM intercooler will become the Achilles Heel of the system with IAT’s skyrocketing out of the optimal range and drastically lowering the performance capabilities of the vehicle. Enter CSF with their stepped core design, bar/plate high performance N54 intercooler. This “drop-in fit” intercooler, which requires no modifications to install, has a bottom / larger section that is 5.5in thick (140mm) with a front face that is massive 8.25in tall (210mm). Made from CSF’s industry exclusive rounded bar/plate core design. The rounded front face of the cooling bars allows for better airflow into the core. Airflow hits the core surface, and rather than scattering like it does with hitting the face of a flat bar that all competing products have, it travels around the face of the round bar and into core for much better performance than both the OEM design (flat face) and all other aftermarket competitors (all have flat face tubes or bars). A huge improvement over the OEM unit, and enough to handle even the most advanced N54 engine builds. Good for 1000hp no problem!
    The CSF N54 Intercooler’s Stepped Core Design maximizes surface area contact and internal intake air-flow volume. The Rounded Front Face Bar/Plate Design optimizes airflow through the core and is a true “Drop-in Fit” Plug-and-Play Design.
    The CSF #8127 Cooling product is designed to be a “Drop-In Fit” application. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.

    • Clears OEM Crash Bar, No Modification to Install with No Cutting or Trimming Required
    • No Cheaper Silicone Hose Clamp System, BMW Style “Quick-Connect” Machined Fittings
    • OEM Mounting Locations with Fitment Kit and Instructions Included
    • The Only TRUE Plug-and-Play Solution Compared to the Rest
    • Bottom/Larger: Section: 5.5″ Thick (140mm)
    • Massive Front Face: 8.25″ Tall (210mm)
    • Good for Over 1000 HP!
    689.91 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com