0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 258.89 $

Mishimoto 21+ Bronco 2.3L Intercooler Pipe Kit Polished

Mishimoto has developed a direct-fit Intercooler Pipe kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows owners to maximize the performance potential of their 2.3L Bronco. Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore(TM) technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo boost. DuraCore(TM) boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. Combine this kit with the Mishimoto 2021+ Bronco Stock Location or High-Mount Intercooler to unleash everything the 2.3L EcoBoost engine is capable of. As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

  • Additional port on cold-side pipe can be drilled and tapped for methanol injection or additional sensors
  • Precision CNC-machined components for exacting fit and performance
  • Increased volume for better flow and power potential

602.42 $

Out of stock
SKU MMICP-BR23-21P
brand Mishimoto

Description

Mishimoto has developed a direct-fit Intercooler Pipe kit for the 2021+ Ford Bronco 2.3L EcoBoost that allows owners to maximize the performance potential of their 2.3L Bronco. Our kit replaces the weak and unattractive plastic piping with high-flowing, durable aluminum piping and silicone boots with DuraCore(TM) technology. The larger volume of our pipes allows your 2.3L EcoBoost to breathe freely and make the most of its turbo boost. DuraCore(TM) boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Available with a sleek polished finish or powder-coated in stealthy wrinkle black, these pipes are a great addition to every 2.3L Bronco from daily driving to the office, to trailblazing through the woods. Combine this kit with the Mishimoto 2021+ Bronco Stock Location or High-Mount Intercooler to unleash everything the 2.3L EcoBoost engine is capable of. As with all Mishimoto products, this 2021+ Ford Bronco 2.3L EcoBoost Intercooler Pipe kit is backed by our Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

  • Additional port on cold-side pipe can be drilled and tapped for methanol injection or additional sensors
  • Precision CNC-machined components for exacting fit and performance
  • Increased volume for better flow and power potential

Specification

Weight 21.3 kg
Dimensions 28 × 14 × 9 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

840197711620
brand

Mishimoto
part_number

MMICP-BR23-21P

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: MMINT-F80-15CYMB

    Mishimoto 2015-2020 BMW F80 M3/M4 Intercooler Yas Marina Blue Metallic

    No Reviews

    BMW’s M lineup is the benchmark when it comes to performance luxury vehicles. The S55 that powers the 2015-2020 BMW F8X M3, M4 and M2 Competition is dripping with technology, which includes an air-to-water. Where BMW’s intercooler design was enough to help bring this generation of M’s to their peak, we here at Mishimoto found some weaknesses to address. We started with the end tanks. The Mishimoto intercooler features full, cast aluminum end tanks, TIG-welded to our bar-and-plate core for maximum durability as you increase the boost in your Bimmer. Our end tanks also include internal air diverters on both the inlet and outlet to ensure an even flow of charged air through the core. When it comes to the core, bigger is better, and we were able to expand the size of our core in all dimensions, resulting in a 29% increase in core volume while abstaining from any modifications when it comes to the installation. Our new core also features a unique single-pass internal fin layout for the coolant passage for optimal heat transfer from the charged air to the coolant. With our improvements combined, we saw the Mishimoto 2015-2020 BMW F8X M3 and M4 Performance Intercooler increase flow through the core by 16% and recorded a 12°F drop in intake air temperatures when tested with the Mishimoto Performance Heat Exchanger. We also recorded an average increase of 11 whp and 8 wtq during our testing with peak gains of up to 31 whp and 10 wtq. To add even more style to your already impeccably designed F80, we’ve painted these charge pipes in your choice of 12 OEM colors. This high-quality, automotive-grade paint is durable enough for life under the hood and is matched to your exterior paint for an engine bay as sleek as the rest of your F80. Like all our products, the Mishimoto 2015-2020 BMW F8X M3, M4, and M2 Competition Performance Air-to-Water Intercooler is backed by the Mishimoto Lifetime Warranty for a lifetime of support for all your performance needs.
    High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.

    • Color matched to your choice of 12 OEM colors or classic black
    • 29-percent increase in core volume
    • 16-percent increase in flow
    2,185.33 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMICP-G80-21

    Mishimoto 2021+ BMW G8X M3/M4 Hot Side Intercooler Charge Pipe Kit

    No Reviews

    The venerable S58 found in the G8X M2, M3, and M4 follows BMW’s tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can’t hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.—-The stock M2/M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M2s, M3s, and M4s pushing more boost. Luckily, Mishimoto has a solution.—-The Mishimoto G8X M2/M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that’s stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.—-This performance charge pipe is a direct fit for your 2021+ BMW G8X M2/M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you’re ready to unleash the limitless potential of your M2, M3, or M4, this Mishimoto performance charge pipe is for you.
    Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

    • Replaces fragile plastic with durable cast aluminum to help prevent costly failures
    • 27% less restrictive than stock for improved flow and power potential
    • Optimized transitions reduce restrictions and improve flow
    1,047.45 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMICP-F10-12MWBK

    Mishimoto 12-16 BMW F10 M5 Intercooler Pipe Kit Micro Wrinkle Black

    No Reviews

    If you own an F10 or F13 M5/M6, chances are you’ve already thought about modifying it. A tune and increased boost pressure are usually one of the first mods done, but the factory plastic charge pipes may throw a wrench in your plans. The factory plastic charge pipes are a known weak link in the intake system and it’s not uncommon for them to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F1X M5/M6 Charge Pipes are a durable, full aluminum construction, expertly TIG-welded to ensure a smooth and strong airflow path for the S63’s boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To provide the utmost perfect fitment, along with the charge pipes, we also include a CNC-machined 6061 aluminum bracket to hold the metal coolant lines that are supported by the factory intake tubes. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto F1X M5/M6 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation.
    Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

    • Holds up against increased boost pressure better than factory plastic pipes
    • Full aluminum TIG-welded construction for maximum durability
    • Includes bung for simple integration of methanol injection
    314.87 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SES1116ICPWB

    Injen 15-16 BMW M3(F80)/M4 (F82/83) 3.0L L6 Twin Turbo 2PC Aluminum Int. Charge Pipe – Wrinkle Black

    No Reviews

    Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
    SES Intercooler Pipes, Part No. SES1116ICPWB, 2015-2018 BMW M3 L6-3.0L(tt) F80, 2015-2020 BMW M4 L6-3.0L(tt) F82/83, 2019-2020 BMW M2 COMPETITION L6-3.0L(tt) F87.
    BMW M3 (F80) 3.0L L6 Twin turbo S55 Intercooler charge pipes. Included two 1/8in. Female NPT bungs for water/meth injection or datalog sensors.Mandrel bentAluminum tubing with CNC machined turbo inlet flanges for O.E. fitment

    • This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
    • Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
    • Manufactured from 2.25″Lightweight 6061-T6 Mandrel-Bent Aluminum Piping
    • Available in Polished, Wrinkle Black, or Wrinkle Red finishes
    • Beaded Tube Ends to Help Prevent Couplers from Coming Off
    • Fits specific applications equipped with the S55 engine
    • Stainless Steel Band Clamp with Inner Protective Liner
    • Increase Throttle Response and Decreases Turbo Lag
    • Unique Injen Logo Plate for a Refined Style
    • Injen Technology Limited Lifetime Warranty
    • Mandrel-bent Tubing for Increased Flow
    • Includes two TIG-Welded 1/8″NPT ports
    • Automotive Grade Silicone Couplers
    • Precision CNC machined flanges
    • Made in Pomona, California USA
    772.08 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com