0
2
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
2 Shopping Cart 447.75 $

Skunk2 Ultra Series K Series Race Intake Manifold – 3.5L Silver

Skunk2 Racing is proud to announce the next generation of high performance intake manifolds for the ’02-’05 Civic Si and ’02-’06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads has finally arrived! The much anticipated Ultra Race Intake Manifold is the result of years worth of R&D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.
Ultra Series Race Intake Manifold; 3.5L Volume; 90mm Inlet w/Early 5.0 Ford TB Bolt Pattern; 4 Secondary Injector Bosses; K20A2 Style; Silver Adapter;

  • Provisions For Additional Injectors On Bottom Side Of Runners
  • Fits ALL Popular Chassis Configurations – Not Just Race Cars
  • Optional Billet Aluminum Plenum Spacers In 1L Or 2L Sizes
  • Raised 87mm Velocity Stacks – Plenty Of Material To Port
  • 90mm Throttle Body Flange – Std. 5.0L Ford Pattern
  • Available in 3.5L/4.5L/And 5.5L Configurations
  • 6.5 in. Tilted/Tapered Hi-Velocity Runners
  • Generously Cast Runner Walls for Porting
  • Includes Thermal Manifold Flange Gasket
  • Hi-Grade Mounting Hardware
  • US Patent No. D673977S

1,234.56 $

Out of stock
SKU 307-05-8000
brand Skunk2 Racing

Description

Skunk2 Racing is proud to announce the next generation of high performance intake manifolds for the ’02-’05 Civic Si and ’02-’06 RSX/ RSX Type S, and/ or any swap using the K20A/ K20A2/ K20Z1/ K24A1 engines or cylinder heads has finally arrived! The much anticipated Ultra Race Intake Manifold is the result of years worth of R&D and building upon the performance legacy of our Pro Series Intake Manifold. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum and optional plenum spacers. The result is a design that is less restrictive, yielding both torque and power gains well over many of the competitors.
Ultra Series Race Intake Manifold; 3.5L Volume; 90mm Inlet w/Early 5.0 Ford TB Bolt Pattern; 4 Secondary Injector Bosses; K20A2 Style; Silver Adapter;

  • Provisions For Additional Injectors On Bottom Side Of Runners
  • Fits ALL Popular Chassis Configurations – Not Just Race Cars
  • Optional Billet Aluminum Plenum Spacers In 1L Or 2L Sizes
  • Raised 87mm Velocity Stacks – Plenty Of Material To Port
  • 90mm Throttle Body Flange – Std. 5.0L Ford Pattern
  • Available in 3.5L/4.5L/And 5.5L Configurations
  • 6.5 in. Tilted/Tapered Hi-Velocity Runners
  • Generously Cast Runner Walls for Porting
  • Includes Thermal Manifold Flange Gasket
  • Hi-Grade Mounting Hardware
  • US Patent No. D673977S

Specification

Weight 6.1 kg
Dimensions 19.7 × 14.8 × 9.3 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

873265007691
brand

Skunk2 Racing
part_number

307-05-8000

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 2040

    Edelbrock Manifold w/ Installation Kit Performer Eps SBC 1957-1986 Natural Finish

    No Reviews

    Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum intake manifold. Kit includes: Performer EPS intake manifold #2701, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carb studs.
    Edelbrock Manifold Installation kit PN 2040 includes all the necessary components to replace your existing intake: PN 2701 Performer EPS intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts & carb studs.
    Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

    • Matched To Manifolds And Cylinder Heads
    424.41 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 71233

    Edelbrock Intake Manifold Ford Mustang 5 0L Performer RPM II Manifold Black Finish

    No Reviews

    Edelbrock part #71233 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit #8025. May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
    Edelbrock Performer 5.0 RPM II Intake Manifold for Ford 5.0 Small-Block V8
    Ford:Small-Block Windsor:302 (5.0L)

    • Black Powder-Coat Finish
    1,481.51 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 7140

    Edelbrock Manifold EFI Pro-Flo XT LS2 As Cast

    No Reviews

    Edelbrock part #7140 Pro-Flo XT LS2 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm throttle bore opening and 2.75″ port exit height. This manifold produced 30 more horsepower over a stock LS6 manifold at 6500 rpm. This Pro-Flo XT LS2 intake manifold accepts GM OEM 90mm or Edelbrock #3869 throttle bodies. Compatible with LS1 Fuel Rail Kit #3629 (sold separately), which features -6 AN inlet and outlet.
    Edelbrock Pro-Flo XT LS2 EFI Intake Manifold For Chevrolet LS Gen III
    Chevrolet:Small-Block Corvette Gen IV LS2:364 (6.0L)

    • As-Cast Finish
    1,009.11 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: ALP.37.08.0001-2

    AMS Performance Alpha V10 Intake Manifold – Anodized (Blue, Black, Red, Violet, Gold, Green)

    No Reviews

    The AMS Performance team has gone the extra mile to develop innovative new solutions to problems found when adding forced induction to the 5.2 FSI V10 engine found in the R8 and Huracan. One of the first problems we needed to solve when developing our twin turbo V10 program was the possibility for the OEM plastic intake manifold to fail, due to the now positive air pressure within the manifold after turbocharging. To solve this, we designed the AMS Performance Alpha V10 Intake Manifold to be capable of handling any amount of boost you can throw at it.
    Alpha Performance Audi R8 / Lamborghini Huracan / Performante Billet Intake Manifold (Non-Standard Color Anodize with Additional Lead Time) (Orange, Almond, Blue Pewter, Copper, Yellow, Gold, Brown).
    2014-Current Audi R8 w/ S-Tronic (Incl. Plus & Performance models); 2015-Current Lamborghini Huracan (Incl. Performante & Evo models)

    19,854.78 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 2 Cart Garage
support@ucperformance.com