Description
Skunk2 Ultra Race B-Series Side Feed Billet Intake Manifold
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Skunk2 Ultra Race B-Series Side Feed Billet Intake Manifold
Skunk2 Ultra Race B-Series Side Feed Billet Intake Manifold
Specification
| Weight | 19.2 kg |
|---|---|
| Dimensions | 19.4 × 14.7 × 8.9 cm |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| units_per_sku | 1 |
| brand | Skunk2 Racing |
| part_number | X307-05-0100 |
Related products
-
Edelbrock part #7179 Victor EFI intake manifold is designed for the “Eagle or WT” Chrysler 5.7L, 6.1L and 6.4L Gen III HEMI engines with fuel injection. The overall design is similar to the factory 6.1L SRT intake manifold, but with longer higher flowing runners and features relocated fuel injector bosses for improved flow and added nitrous bosses along the near vertical runners. The front inlet can accommodate the factory style 80mm throttle body or the 92mm Hellcat throttle body. In testing, the Victor EFI prototype made 25 hp over the stock intake manifold on a 6.4L engine. Manifold will clear most hoods without modifications. Required fuel rail kit #3647 available separately.
Edelbrock Victor EFI Intake Manifold for Gen III HEMI (Eagle or WT)
Chrysler:Gen III HEMI:345 (5.7L)/372 (6.1L)/392 (6.4L)- Will Clear Most Hoods Without Modifications
-
Edelbrock part #4760 Victor X intake manifold is designed for Integra GSR with B18C engine. This intake manifold is optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered for high performance, this manifold has four additional bosses for nitrous or added fuel injectors.
Edelbrock Victor B18C GSR Intake Manifold Honda
Honda:B-Series DOHC- Ideal For Normally Aspirated/Turbocharged Engine
-
Available through 034Motorsports, this manifold was designed to be a direct bolt-in replacement for the stock intake manifold, and features a modular design, with a rotatable plenum that allows for driver side or passenger side throttle body locations. Featuring a 1.85L plenum, the 034Motorsport High Flow Intake Manifold was engineered not only for high-horsepower, big turbo builds, but also to offer noticeable improvements in low-end and mid range power, even on stock turbo configurations.
High Flow Intake Manifold; Small Port; Modular Design; w/Rotatable Plenum; Stealth Mounting Bosses; Stock Bolt Pattern w/72mm Opening; Raw Aluminum;- Stealth Mounting Bosses For Nitrous Or Methanol Injection
- Angled Runners And Indexed Throttle Body Position
- High Flow And High Velocity Tapered Runners
- Smooth Plenum Interior For Improved Airflow
- Provision For Stock or 80mm Throttle Bodies
- Optimal Fitment And Intake Routing
- No Extra Vacuum Manifold Needed
- Complete With Vacuum Provision
- Large Low Profile Airhorns
-
Edelbrock part #2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Edelbrock Performer AMC Intake Manifold for 1970 and Later 304-401 c.i.d. AMC V8 Engines is Designed for use with 4150-Style Square-Bore Carburetors. (Will not accept stock Motorcraft Carburetor). Non-EGR
AMC:Small-Block:304 (5.0L)/360 (5.9L)/401 (6.6L)- Two Center Bolt Holes are Offset
Reviews
There are no reviews yet.