0
4
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
4 Shopping Cart 3,658.25 $

Edelbrock Dual Quad Kit RPM Air-Gap 289-302 Ford

The Edelbrock #2035 RPM Dual-Quad manifold and carb kit is designed for Small-Block Ford 289-302 applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. The Edelbrock #2035 includes an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AVS carburetors calibrated specifically for dual-quad applications (one manual choke, one electric choke). To make the installation simple, these kits also include our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, intake bolt set and carburetor stud kit. The manifold and Thunder Series carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.
Edelbrock RPM Dual-Quad manifold and carb kit for Small-Block Ford 289-302. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.
Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L)

  • Resists Discoloration From Heat

2,592.61 $

Out of stock
SKU 2035
brand Edelbrock

Description

The Edelbrock #2035 RPM Dual-Quad manifold and carb kit is designed for Small-Block Ford 289-302 applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. The Edelbrock #2035 includes an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AVS carburetors calibrated specifically for dual-quad applications (one manual choke, one electric choke). To make the installation simple, these kits also include our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, intake bolt set and carburetor stud kit. The manifold and Thunder Series carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.
Edelbrock RPM Dual-Quad manifold and carb kit for Small-Block Ford 289-302. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.
Ford:Small-Block Windsor:289 (4.7L)/302 (5.0L)

  • Resists Discoloration From Heat

Specification

Weight 43.3 kg
Dimensions 25.5 × 13.9 × 13.8 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

85347020355
brand

Edelbrock
part_number

2035

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 2750

    Edelbrock Performer 351C-2V Manifold

    No Reviews

    Edelbrock part #2750 Performer 351-2V intake manifold is designed for street 351C and accepts 4V carb, however it’s designed to improve the performance of engines that came stock with 2V carb and heads. Manifold will fit Boss 302 or accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32″. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
    Performer 351-2V for Small-Block Ford 351-C & Boss 351 is Designed to Improve the Performance of Engines that came Stock w/2V Carb and Heads. Will Not Fit Boss 302 or Stock Motorcraft Carb. Accepts 4150-Style Square-Bore Carburetor. Non-EGR
    Ford:Cleveland:351 (5.8L)

    • Accepts both 4V and 2V Carburetors
    605.90 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 4760

    Edelbrock Honda B18C Race Manifold

    No Reviews

    Edelbrock part #4760 Victor X intake manifold is designed for Integra GSR with B18C engine. This intake manifold is optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered for high performance, this manifold has four additional bosses for nitrous or added fuel injectors.
    Edelbrock Victor B18C GSR Intake Manifold Honda
    Honda:B-Series DOHC

    • Ideal For Normally Aspirated/Turbocharged Engine
    968.38 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 2701

    Edelbrock SBC Performer Eps Manifold

    No Reviews

    Edelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.
    Edelbrock Performer EPS Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8, Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
    Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

    • Prod. +5 HP and +9 ft./lbs. of Torque Over PN[2101]
    315.37 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 7501

    Edelbrock S/B Chevy RPM Air-Gap Manifold

    No Reviews

    Edelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.
    Edelbrock Performer RPM AIR-GAP Intake Manifold For Chevrolet 262-400 Small-Block V8
    Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)

    • For Square Bore Carburetors Only
    518.74 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 4 Cart Garage
support@ucperformance.com