0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 683.28 $

Edelbrock Cylinder Head SBC Performer RPM Straight Spark Plugs 70cc

The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.
The Edelbrock #60735 Performer RPM cylinder heads are designed for 1955-86 SB Chevy applications. The #60735 Performer RPM heads are perfect for street performance, daily drivers and muscle cars where more performance is needed.
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

  • Thicker Deck Surfaces Than Other Brands

1,472.68 $

Out of stock
SKU 60735
brand Edelbrock

Description

The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.
The Edelbrock #60735 Performer RPM cylinder heads are designed for 1955-86 SB Chevy applications. The #60735 Performer RPM heads are perfect for street performance, daily drivers and muscle cars where more performance is needed.
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

  • Thicker Deck Surfaces Than Other Brands

Specification

Weight 30.35 kg
Dimensions 22.2 × 10.1 × 7.2 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

85347607358
brand

Edelbrock
part_number

60735

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 2240

    Edelbrock Chevy SB 262-400 E-Street Cylinder Heads – Hydraulic Flat Tappet w/ Install kit

    No Reviews

    Cylinder Head Specifications: Combustion chamber volume: 70cc / 64cc; Intake runner volume: 185cc; Exhaust runner volume: 60cc; Intake valve diameter: 2.02″; Exhaust valve diameter: 1.60″; Valve stem diameter: 11/32″; Valve guides: Manganese bronze; Deck thickness: 9/16″; Valve spring diameter: 1.460″; Valve spring maximum lift: .550″; Rocker stud: 3/8″ with guide plate; Guideplate: Hardended steel; Pushrod diameter: 5/16″; Valve angle: 23°; Exhaust port location: Stock; Spark plug fitment: 14mm x 3/4 reach, gasket seat * Use with Hydraulic Flat Tappet Camshafts .550″ max lift. (NOT Compatible with Hydraulic Roller Camshafts) Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4″ reach with flat gasket seat. Requires hardened pushrods. Not legal for sale or use on pollution controlled motor vehicles.
    Edelbrock Complete Small Block Chevy E-Street Cylinder Heads with Install kit
    Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

    2,453.72 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77618

    Edelbrock Gen IV Chevrolet LS3 0.660in Maximum Lift E-Street Cylinder Heads

    No Reviews

    Edelbrock introduces its new E-Street 15-degree LS3 69cc cylinder heads (PN 77618) as a premium replacement option, ensuring great power on any high-performance or stock GM LS3 engine build. These heads offer the best performance value of any aftermarket GM LS3 head. Sold in pairs and assembled with premium COMP Cams valve train components, these LS3 heads are engineered with the same architecture as the factory head, and all stock components will fit without issue. The assembled heads feature dual valve springs, chromoly steel retainers, heavy-duty stainless-steel valves, and top-quality valve seals – all inspected and assembled by qualified Edelbrock technicians. The intake valve size is 2.165 while the exhaust is 1.590 . The Beehive Valve Springs allow up to .660 lift camshafts, ideal for many mild to hot camshaft grinds. Edelbrock E-Street 15-degree LS3 cylinder heads are manufactured with premium aluminum alloy, machined to the industry’s tightest tolerances. They feature manganese bronze valve guides for extended wear, with particular emphasis placed on holding precision tolerances on valve seat concentricity. This allows the valves to seal securely, eliminating any leak-down and increasing cylinder pressures during engine operation. All Edelbrock cylinder heads feature patented Clean Cast Technology(TM) , a revolutionary process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability right out of the box. A unique dual spark-plug-pocket design allows you to use the factory-style tapered-seat spark plugs or gasket-seat spark plugs available in wider heat ranges for maximum tunability.
    The E-Street Cylinder Heads for GM LS3 are designed as premium quality, bolt-on-ready cylinder heads for any high-performance or stock replacement application. The chambers are 69cc, while the dual springs allow .660 lift camshafts.

    • 2.165″ Stainless Intake Valve, 1.59″ Stainless Exhaust Valve
    • Sold in Pairs (2 complete, assembled heads per part number)
    • Ready to bolt on out of the box
    • 260cc Intake Port Volume
    • GM LS3 Compatible
    2,144.26 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77689

    Edelbrock Victor CNC GM LS7 12 Degree 6-Bolt Cylinder Head, 291cc, .220in Int Port, Copper Seat

    No Reviews

    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77689 is designed for maximum effort naturally aspirated and boosted applications. It features .220 raised intake runners and .100 raised exhaust ports that provide a better line of sight into the cylinders and allow for an improved short turn. The raised intake runner design fits both stock and aftermarket LS7 intake manifolds and can be used with stock or aftermarket valve trains. The head utilizes the GM LS 6-bolt design, making it compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The 6-bolt design offers increased clamping capacity over the standard factory 4-bolt configuration and improves head gasket sealing – ideal for high compression naturally aspirated engines and high boost applications. Features include a 12-degree valve angle and fully CNC-machined ports for maximum airflow. CNC-machined runners and chambers, as well as the .220 raised intake ports and 12-degree valve angle, increase overall flow capability, while a revised water jacket design enhances thermal conductivity and tunability. The manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, which eliminates leak down and increases cylinder pressure during engine operation. Finally, the .700 thick deck and .400 raised valve cover rail make this head ideal for maximum horsepower and high valve lift applications. All Edelbrock Victor CNC heads feature patented Clean Cast Technology(TM) , a process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability. Part #77689 is a bare head that features: 291cc runners, 69cc chambers, 2.200 intake/1.615 exhaust valves, copper valve seats and includes down nozzles.
    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77689 is specifically designed for maximum effort naturally aspirated and boosted applications.

    • Premium 110 BHN aluminum alloy, .220″ raised intake port, .100″ raised exhaust port, Copper valve seats, 307cc or 291cc intake port volume, 2.250″ or 2.200″ x 1.615″ valve job
    2,910.45 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com