0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 711.99 $

Edelbrock Cylinder Head Performer Jeep 4 0L I6 Bare

The Edelbrock #50159 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine. They feature better flowing intake/exhaust ports along with a modern combustion chamber design and back cut and swirl polished valves for improved flow. Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off the shelf accessories. Larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil threaded inserts in the intake manifold bolt holes for added strength as well as a 3/4″ deck throughout the head also promotes stiffness and durability. This cylinder head is machined to accept both distributor or coil pack ignition. To optimize airflow, this cylinder head is designed with a 1991-2006 4.0L intake port location and 1991-98 4.0L exhaust port size. As a result, this cylinder head must be used with a 1991-2006 intake manifold and a 1991-1998 exhaust manifold. Aftermarket exhaust headers can also be used in place of 1991-1998 exhaust manifolds and MUST be used in place of 1999-2006 exhaust manifolds. Most aftermarket exhaust headers are compatible, but please check with the exhaust header manufacture to verify. This head is NOT compatible with 1999-2006 OEM exhaust manifolds.
The Edelbrock #50159 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine.

  • Retains Stock Valve Angle

1,998.49 $

Out of stock
SKU 50159
brand Edelbrock

Description

The Edelbrock #50159 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine. They feature better flowing intake/exhaust ports along with a modern combustion chamber design and back cut and swirl polished valves for improved flow. Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off the shelf accessories. Larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil threaded inserts in the intake manifold bolt holes for added strength as well as a 3/4″ deck throughout the head also promotes stiffness and durability. This cylinder head is machined to accept both distributor or coil pack ignition. To optimize airflow, this cylinder head is designed with a 1991-2006 4.0L intake port location and 1991-98 4.0L exhaust port size. As a result, this cylinder head must be used with a 1991-2006 intake manifold and a 1991-1998 exhaust manifold. Aftermarket exhaust headers can also be used in place of 1991-1998 exhaust manifolds and MUST be used in place of 1999-2006 exhaust manifolds. Most aftermarket exhaust headers are compatible, but please check with the exhaust header manufacture to verify. This head is NOT compatible with 1999-2006 OEM exhaust manifolds.
The Edelbrock #50159 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine.

  • Retains Stock Valve Angle

Specification

Weight 36.15 kg
Dimensions 33.5 × 8.8 × 7.5 cm
air_freight_prohibited

false
not_carb_approved

false
carb_acknowledgement_required

false
carb_eo_number

D-215-94
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

Compliant
units_per_sku

1
brand

Edelbrock
part_number

50159

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 618270

    Edelbrock Big Victor 498cc CNC 12 Degree 2.500in x 1.800in Cylinder Head

    No Reviews

    Edelbrock introduces its new Big Vic CNC 12-degree race head, specifically designed for maximum competition naturally aspirated, nitrous injected, and boosted applications. The Big Vic 12 is cast in the USA at Edelbrock’s state-of-the-art foundry, using a premium aluminum alloy that undergoes hot isostatic pressing for a more stable and dense grain structure. The large CNC oval ports and 2.500 x 1.800 valve job are specifically designed to maintain high airspeed for maximum cylinder fill during valve opening and generate a high torque curve throughout the engine’s operating range. Manufactured with premium materials and machined to the industry’s tightest tolerances, these heads feature a 12-degree valve angle, copper valve seats, and fully CNC-machined 498cc ports and 82cc chambers to increase overall airflow capability. The premium manganese bronze valve guides withstand long wear with emphasis placed on holding precise tolerances on valve seat concentricity, allowing the valves to seal securely to eliminate leak-down and increase cylinder pressures during engine operation.
    Edelbrock’s Big Victor cylinder heads are made with premium HIP aluminum alloy. They feature 498cc raised intake ports, 82cc chambers, and 2.500″ / 1.800″ Ex valve job.

    6,749.96 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 61349

    Edelbrock Victor Jr Gen III/ IV LS Chevy Cylinder Head LSX Block

    No Reviews

    The Edelbrock #61349 Victor Jr. LS3 cylinder head is ideal for use in high Performance’s street and competition engines that have reached their limit with a stock-style cylinder head design. Most aftermarket LS3 cylinder head on the market today are simply stock head designs with larger ports. Our Victor Jr. LS3 cylinder head is an all-new ground up design that incorporates subtle changes for improved flow and combustion. These changes were made to improve the limitations encountered in the stock cylinder head when increasing the performance level of the engine. Changes include a 2.20″ diameter intake valve with a canted configuration similar to what is utilized in the GM LT1 Gen V engine. The intake valve change along with the unique port shape produce almost 400cfm peak flow. This cylinder head also feature fully CNC intake ports, combustion chambers and exhaust ports for consistency and improved performance. All of these changes make this cylinder head capable of producing 600+ hp on an LS3 engine with stock rocker arms, intake manifold and exhaust manifolds.
    Edelbrock part #61349 Victor Jr. LS3 (6-bolt flange) is a complete cylinder head ideal for use in high Performance’s street and competition engines that have reached their limit with a stock-style cylinder head design.
    Chevrolet:Small-Block Gen IV L76:364 (6.0L);Chevrolet:Small-Block Gen IV L77:364 (6.0L);Chevrolet:Small-Block Gen IV L92:376 (6.2L);Chevrolet:Small-Block Gen IV L94:376 (6.2L);Chevrolet:Small-Block Gen IV L99:376 (6.2L);Chevrolet:Small-Block Gen IV L9H:37

    • Capable Of Producing 650+ hp On an LS3 w/Stock Rocker Arms
    2,327.13 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77678

    Edelbrock LS7 Victor CNC 291cc 2.200in x 1.615in VJ Copper Bare Head

    No Reviews

    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77678 is designed for maximum effort naturally aspirated and boosted applications. It features .220 raised intake runners and .100 raised exhaust ports that provide a better line of sight into the cylinders and allow for an improved short turn. The raised intake runner design fits both stock and aftermarket LS7 intake manifolds and can be used with stock or aftermarket valve trains. The head utilizes the GM LS 6-bolt design, making it compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The 6-bolt design offers increased clamping capacity over the standard factory 4-bolt configuration and improves head gasket sealing – ideal for high compression naturally aspirated engines and high boost applications. Features include a 12-degree valve angle and fully CNC-machined ports for maximum airflow. CNC-machined runners and chambers, as well as the .220 raised intake ports and 12-degree valve angle, increase overall flow capability, while a revised water jacket design enhances thermal conductivity and tunability. The manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, which eliminates leak down and increases cylinder pressure during engine operation. Finally, the .700 thick deck and .400 raised valve cover rail make this head ideal for maximum horsepower and high valve lift applications. All Edelbrock Victor CNC heads feature patented Clean Cast Technology(TM) , a process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability. Part #77678 is a bare head that features: 291cc runners, 69cc chambers, 2.200 intake/1.615 exhaust valves, copper valve seats and no down nozzles.
    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77678 is specifically designed for maximum effort naturally aspirated and boosted applications.

    • Premium 110 BHN aluminum alloy, .220″ raised intake port, .100″ raised exhaust port, CI PM valve seats, 307cc or 291cc intake port volume, 2.250″ or 2.200″ x 1.615″ valve job
    2,771.39 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com