0
2
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
2 Shopping Cart 8,017.79 $

Edelbrock Cylinder Head BBC BV3 Pro Port Hipd 11 Deg Intake Valve Extended Exhaust Flange

Edelbrock Part #613669 is a Pro Port head that requires professional porting prior to use since the ports and chambers are deliberately undersize to permit a wide variety of end applications. The head has an 11″ intake valve angle and is intended for high output, large cubic inch, 4.84″ bore spacing (stock) big block Chevrolet racing engines. The 613669 employs a symmetrical port head architecture similar to the Pro Stock DRCE3. The head is treated with the HIP strengthening process, prior to machining, to insure the finest casting possible. This version has an extended flange which will likely require a new exhaust system or changes to a standard flange header. FEATURES: – Port Entry Int. / Exh 2.52″ x 2.15″ / 1.84″ x 1.50″ – Exhaust runner volume: 80cc – Intake valve diameter: 2.600″ – Exhaust valve diameter: 1.94″ – Deck thickness: 5/8″ – Valve spring diameter: 1.30″ – Valve spring maximum lift: .680″ – Valve angle: 11deg – Exhaust port location: 0.125″ Raised Port – Spark plug fitment: 14mm x 3/4 reach, gasket seat – Heli-coiled exhaust bolt holes – Tipped entry oval intake port opening – Unique cooling flow for better durability and consistency – Intake manifold and valley cover plates available for regular and tall deck blocks – Hot Isostatic Pressed (HIP process) for improved strength – Effective internal oil drainage plus available external oil drains – Versatile cooling system options for a variety of applications – Seats installed with underside guide bores at .375″.502″ Guides are included but will not be installed.
Edelbrock #613669 is a Pro Port Big-Victor 3 Cylinder Head for Big-Block Chevrolet Engines. Features Conventional bore spacing (4.84″), 11 Deg Intake Valve, & Extended Exhaust Flanges. HIP Treated Casting
Chevrolet:Big-Block Race

  • Big Victor Raw Cylinder Head

4,192.73 $

Out of stock
SKU 613669
brand Edelbrock

Description

Edelbrock Part #613669 is a Pro Port head that requires professional porting prior to use since the ports and chambers are deliberately undersize to permit a wide variety of end applications. The head has an 11″ intake valve angle and is intended for high output, large cubic inch, 4.84″ bore spacing (stock) big block Chevrolet racing engines. The 613669 employs a symmetrical port head architecture similar to the Pro Stock DRCE3. The head is treated with the HIP strengthening process, prior to machining, to insure the finest casting possible. This version has an extended flange which will likely require a new exhaust system or changes to a standard flange header. FEATURES: – Port Entry Int. / Exh 2.52″ x 2.15″ / 1.84″ x 1.50″ – Exhaust runner volume: 80cc – Intake valve diameter: 2.600″ – Exhaust valve diameter: 1.94″ – Deck thickness: 5/8″ – Valve spring diameter: 1.30″ – Valve spring maximum lift: .680″ – Valve angle: 11deg – Exhaust port location: 0.125″ Raised Port – Spark plug fitment: 14mm x 3/4 reach, gasket seat – Heli-coiled exhaust bolt holes – Tipped entry oval intake port opening – Unique cooling flow for better durability and consistency – Intake manifold and valley cover plates available for regular and tall deck blocks – Hot Isostatic Pressed (HIP process) for improved strength – Effective internal oil drainage plus available external oil drains – Versatile cooling system options for a variety of applications – Seats installed with underside guide bores at .375″.502″ Guides are included but will not be installed.
Edelbrock #613669 is a Pro Port Big-Victor 3 Cylinder Head for Big-Block Chevrolet Engines. Features Conventional bore spacing (4.84″), 11 Deg Intake Valve, & Extended Exhaust Flanges. HIP Treated Casting
Chevrolet:Big-Block Race

  • Big Victor Raw Cylinder Head

Specification

Weight 70 kg
Dimensions 26.5 × 12.1 × 9 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

085347996605
brand

Edelbrock
part_number

613669

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 2240

    Edelbrock Chevy SB 262-400 E-Street Cylinder Heads – Hydraulic Flat Tappet w/ Install kit

    No Reviews

    Cylinder Head Specifications: Combustion chamber volume: 70cc / 64cc; Intake runner volume: 185cc; Exhaust runner volume: 60cc; Intake valve diameter: 2.02″; Exhaust valve diameter: 1.60″; Valve stem diameter: 11/32″; Valve guides: Manganese bronze; Deck thickness: 9/16″; Valve spring diameter: 1.460″; Valve spring maximum lift: .550″; Rocker stud: 3/8″ with guide plate; Guideplate: Hardended steel; Pushrod diameter: 5/16″; Valve angle: 23°; Exhaust port location: Stock; Spark plug fitment: 14mm x 3/4 reach, gasket seat * Use with Hydraulic Flat Tappet Camshafts .550″ max lift. (NOT Compatible with Hydraulic Roller Camshafts) Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4″ reach with flat gasket seat. Requires hardened pushrods. Not legal for sale or use on pollution controlled motor vehicles.
    Edelbrock Complete Small Block Chevy E-Street Cylinder Heads with Install kit
    Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

    2,453.72 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77670

    Edelbrock Small-Block LS3 Victor CNC 11-Degreee Bare Cylinder Heads

    No Reviews

    The Edelbrock Victor CNC 11 6-Bolt Cylinder Heads for GM LS3 68cc Individual #77670 is specifically designed for high horsepower, naturally aspirated and boosted applications. Edelbrock Victor CNC 11 6-Bolt Cylinder Heads for GM LS3 engines utilize the popular LS 6-bolt design, making them compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The 6-bolt design offers increased clamping capacity over the standard factory 4-bolt configuration and greatly improves head gasket sealing, making them ideal for high compression naturally aspirated engines and high boost applications. These heads are manufactured with premium materials and machined to the industry’s tightest tolerances. Features include an 11 valve angle, copper infiltrated powder metal valve seats and fully CNC-machined ports for maximum airflow. The CNC-machined runners and chambers, as well as the rolled 11 valve angle, increase overall flow capability, while the revised water jacket design enhances thermal conductivity and tunability. The premium manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, which eliminates leak down and increases cylinder pressure during engine operation. Finally, the .700 thick deck and reinforced rocker rails make these cylinder heads ideal for high horsepower applications. Edelbrock #77670 is a bare head.
    The Edelbrock Victor CNC 11 6-Bolt Cylinder Heads for GM LS3 68cc Individual #77670 is specifically designed for high horsepower, naturally aspirated and boosted applications.
    Does not include valves or a valve spring kit. Includes just the valve seats and guides.

    2,063.47 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77666

    Edelbrock Victor CNC GM LS7 12 Degree 6-Bolt Cylinder Head, 307cc, .220in Int Port, Copper Seat

    No Reviews

    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77666 is designed for maximum effort naturally aspirated and boosted applications. It features .220 raised intake runners and .100 raised exhaust ports that provide a better line of sight into the cylinders and allow for an improved short turn. The raised intake runner design fits both stock and aftermarket LS7 intake manifolds and can be used with stock or aftermarket valve trains. The head utilizes the GM LS 6-bolt design, making it compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The 6-bolt design offers increased clamping capacity over the standard factory 4-bolt configuration and improves head gasket sealing – ideal for high compression naturally aspirated engines and high boost applications. Features include a 12-degree valve angle and fully CNC-machined ports for maximum airflow. CNC-machined runners and chambers, as well as the .220 raised intake ports and 12-degree valve angle, increase overall flow capability, while a revised water jacket design enhances thermal conductivity and tunability. The manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, which eliminates leak down and increases cylinder pressure during engine operation. Finally, the .700 thick deck and .400 raised valve cover rail make this head ideal for maximum horsepower and high valve lift applications. All Edelbrock Victor CNC heads feature patented Clean Cast Technology(TM) , a process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability. Part #77666 is a bare head that features: 307cc runners, 69cc chambers, 2.250 intake/1.615 exhaust valves, copper valve seats and no down nozzles.
    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77666 is specifically designed for maximum effort naturally aspirated and boosted applications.

    • Premium 110 BHN aluminum alloy, .220″ raised intake port, .100″ raised exhaust port, Copper valve seats, 307cc or 291cc intake port volume, 2.250″ or 2.200″ x 1.615″ valve job
    2,910.45 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 77668

    Edelbrock Victor CNC GM LS7 12 Degree 6-Bolt Cylinder Head, 307cc, .220in Int Port, CI PM Seat

    No Reviews

    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77668 is designed for maximum effort naturally aspirated and boosted applications. It features .220 raised intake runners and .100 raised exhaust ports that provide a better line of sight into the cylinders and allow for an improved short turn. The raised intake runner design fits both stock and aftermarket LS7 intake manifolds and can be used with stock or aftermarket valve trains. The head utilizes the GM LS 6-bolt design, making it compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The 6-bolt design offers increased clamping capacity over the standard factory 4-bolt configuration and improves head gasket sealing – ideal for high compression naturally aspirated engines and high boost applications. Features include a 12-degree valve angle and fully CNC-machined ports for maximum airflow. CNC-machined runners and chambers, as well as the .220 raised intake ports and 12-degree valve angle, increase overall flow capability, while a revised water jacket design enhances thermal conductivity and tunability. The manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, which eliminates leak down and increases cylinder pressure during engine operation. Finally, the .700 thick deck and .400 raised valve cover rail make this head ideal for maximum horsepower and high valve lift applications. All Edelbrock Victor CNC heads feature patented Clean Cast Technology(TM) , a process that eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and increased cooling ability. Part #77668 is a bare head that features: 307cc runners, 69cc chambers, 2.250 intake/1.615 exhaust valves, CI PM valve seats and no down nozzles.
    The Edelbrock Victor CNC 12 6-Bolt Head for GM LS7 291cc/69cc Individual #77668 is specifically designed for maximum effort naturally aspirated and boosted applications.

    • Premium 110 BHN aluminum alloy, .220″ raised intake port, .100″ raised exhaust port, Copper valve seats, 307cc or 291cc intake port volume, 2.250″ or 2.200″ x 1.615″ valve job
    2,343.56 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 2 Cart Garage
support@ucperformance.com