Description
Wagner Tuning Universal MFD32S Gen 2 Digital Dash Display
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Wagner Tuning Universal MFD32S Gen 2 Digital Dash Display
Wagner Tuning Universal MFD32S Gen 2 Digital Dash Display
Specification
| Weight | 1 kg |
|---|---|
| Dimensions | 7.5 × 7.5 × 7.5 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| carb_acknowledgement_required | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | automotive |
| epa | N/A |
| regular_stock | false |
| units_per_sku | 1 |
| brand | Wagner Tuning |
| part_number | WT03002 |
Related products
-
All AEM Tru-Boost gauge programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included.Program Two Boost Levels + Scramble Boost Setting – Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.Change Wastegate Open Pressure-Ideal for reducing boost spikes and improving spool up.Display Boost Levels in PSIg (PSI), BAR or kPa (PAS) -See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.Set Alarms and Display Peak Boost-Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu.Overboost Protection Built In-Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.Integrated Error Protection-Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.Datalog using AEMnet CAN bus-Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.
Tru-BoostX Controller Gauge with Boost Control Solenoid, 80 PSIg Internal MAP Sensor, Boost Hose Line and Wiring Harness.- Overboost protection and programmable alarms, ground output for optional LED warning light
- Slim 0.825″ overall gauge depth and 0.200″ cup depth – mount them virtually anywhere!
- Wastegate open pressure setting for controlling boost spikes and faster spool
- On-board 80PSIg MAP sensor-no upgrade kit needed for high boost vehicles
- AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
- Programmable center LED is 87% larger than original AEM gauges
- 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
- 24 green outer LEDs for quick reference to engine parameter
- Two boost level settings and scramble boost setting
- A boost display gauge and boost controller in one!
- Display boost levels in PSI, BAR or kPa
- Easy to program – no laptop required
-
Wagner Tuning BMW 3-Series E90/E91/E92/E93 335i N54/N55 MFD28 Gen2 Digital Dash Display
-
Turbosmart Electric Boost Only Gauge 4 Bar 52mm
-
AEM’s Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED “needle” that lines the edge and moves as boost from 0 to up to 50 PSI. The boost gauge’s digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.AEM’s digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.
Digital Boost Gauge, -30 – 35psi, incl blk and wht faces, blk and silvr bezels- 0-5V analog output included for use with data loggers and virtually any engine management system
- 24 green LED display lights provide immediate reference to monitored engine function
- Each gauge comes with interchangeable black/silver bezels and black/white faceplates
- Easy-to-install Plug & Play harness and sensor included
- Auto-dimming gauge face and read out lighting
- Standard 52mm (2-1/16″) gauge housing
- Ideal for carbureted or EFI vehicles
- Three digit readout in center
- Brass sensor included
Reviews
There are no reviews yet.