The Master Flo-Check Pro system allows you to set your flowing fuel pressure without pouring fuel into your engine. This PRO version includes a 6 in. super high accuracy gauge which allows you to set fuel pressure in 1/8 lb. increments.
MASTER FLO-CHECK PRO (6 CERTIFIED GAUGE/MOLDED CASE)
The Master Flo-Check Pro system allows you to set your flowing fuel pressure without pouring fuel into your engine. This PRO version includes a 6 in. super high accuracy gauge which allows you to set fuel pressure in 1/8 lb. increments.
MASTER FLO-CHECK PRO (6 CERTIFIED GAUGE/MOLDED CASE)
| Weight | 3.8 kg |
|---|---|
| Dimensions | 14.5 × 8.8 × 2.8 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 653374002998 |
| brand | Nitrous Express |
| part_number | 15529 |
Turbosmart Electric Exhaust Gas Temperature (EGT) Gauge is designed to monitor temperatures from 400-2200 Degrees F. This high-quality gauge includes a Turbosmart anti-glare shield, bracket, wiring harness and exhaust gas temperature sensor to ensure proper installation and operation. With Turbosmart’s EGT Gauge, you can accurately monitor exhaust temperatures to ensure your engine runs efficiently and safely. Turbosmart’s EGT Gauge provides the essential information you need to ensure your engine performs at its best. Get Turbosmart’s Electric Exhaust Gas Temperature Gauge today and take control of your engine tuning.
Electric Exhaust Gas Temperature gauge, measuring from 400-2200 Degrees F.
AEM offers high quality stainless steel PSIa sensors in 15 (1BAR), 30 (2BAR), 50 (3.5BAR), 75 (5BAR) and 100 (7BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa pressure sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.
15 PSIa or 1 Bar Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread, Includes 15 PSIa or 1 Bar Stainless Sensor, Connector, Pins, 1/8-inch NPT to -4 Adapter & 1/8-inch NPT to 3/16-inch Barb Adapter
Wagner Tuning BMW 3-Series E90/E91/E92/E93 335i N54/N55 MFD28 Gen2 Digital Dash Display
150 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8″ NPT Male Thread. Includes: 150 PSIg Stainless Sensor, Connector, Pins & 1/8″ NPT to -4 AdapterGauge style (PSIg) Pressure SensorsAEM offers high quality stainless steel PSIg sensors in 100, 150, 500, 1,000, and 2,000. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge style pressure sensors are commonly used for oil pressure, fuel pressure, brake pressure, nitrous pressure etc.Which Pressure Sensor is right for you?There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:Brass Pressure Sensor = RulerUse a Brass Pressure Gauge Sensor where you need a good reference to what pressure is being seen.Example: Brass Pressure Sensor used for a Boost Gauge – Reference/Information for knowing manifold pressure, not for ECU calibration.Stainless Steel Pressure Sensor = CaliperUse a SS Pressure Sensor where you need exact details of the pressure.Example: MAP Sensor information for the ECU – Calibration/crucial information for the ECU.
150 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread, Includes 150 PSIg Stainless Sensor, Connector, Pins and 1/8-inch NPT to -4 Adapter
Reviews
There are no reviews yet.