0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

AEM RTD Exhaust Gas Temperature Sensor Kit

AEM’s RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the previous generation’s perforated tip design and the tip is smaller for less intrusion-and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. The sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and its thin-film platinum element provides a high degree of accuracy (+/- 0.9% from 536 to 1,560 degrees F). Our RTD-Type Sensor features a 90-degree bend at the sensor tip for easier installation in tight spaces, and it includes a weld-in sensor bung with machined M14x1.5 threads.
RTD Exhaust Gas Temperature Sensor Kit, 90-Degree Platinum Closed Tip Design with Inconel 601 Coating, -40°C to 850°C Temperature Range, M14x1.5 Thread w/ Bung, 2-Pin DTM Connector (Mating Connector Not Included)

  • No calibration needed when used with out gauges.
  • Sold individually or in 2-or 4-packs
  • EGT sensor kit for 30-0305 EGT gauge
  • Female thread end

242.30 $

SKU 30-2052
brand AEM
Add to wishlist Add to compare

Description

AEM’s RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the previous generation’s perforated tip design and the tip is smaller for less intrusion-and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. The sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and its thin-film platinum element provides a high degree of accuracy (+/- 0.9% from 536 to 1,560 degrees F). Our RTD-Type Sensor features a 90-degree bend at the sensor tip for easier installation in tight spaces, and it includes a weld-in sensor bung with machined M14x1.5 threads.
RTD Exhaust Gas Temperature Sensor Kit, 90-Degree Platinum Closed Tip Design with Inconel 601 Coating, -40°C to 850°C Temperature Range, M14x1.5 Thread w/ Bung, 2-Pin DTM Connector (Mating Connector Not Included)

  • No calibration needed when used with out gauges.
  • Sold individually or in 2-or 4-packs
  • EGT sensor kit for 30-0305 EGT gauge
  • Female thread end

Specification

Weight 0.25 kg
Dimensions 4.7 × 4.3 × 2.4 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

840879026837
brand

AEM
part_number

30-2052

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: TS-0701-2011

    Turbosmart EGT Gauge 0-2200 F Deg 52mm – 2 1/16

    No Reviews

    Turbosmart Electric Exhaust Gas Temperature (EGT) Gauge is designed to monitor temperatures from 400-2200 Degrees F. This high-quality gauge includes a Turbosmart anti-glare shield, bracket, wiring harness and exhaust gas temperature sensor to ensure proper installation and operation. With Turbosmart’s EGT Gauge, you can accurately monitor exhaust temperatures to ensure your engine runs efficiently and safely. Turbosmart’s EGT Gauge provides the essential information you need to ensure your engine performs at its best. Get Turbosmart’s Electric Exhaust Gas Temperature Gauge today and take control of your engine tuning.
    Electric Exhaust Gas Temperature gauge, measuring from 400-2200 Degrees F.

    325.33 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 30-0300

    AEM X-Series Wideband UEGO AFR Sensor Controller Gauge

    No Reviews

    Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases can affect deadtime, it is not the only source. Often, the sensing element’s response to the gas is the largest contributor to deadtime.When tuning an engine using wideband AFR feedback control, deadtime affects the data you are looking at because it is reported in a different operating location than when it occurred. This means whatever changes you make to the base fueling will likely be in the wrong timeframe. This can be particularly dangerous to high cylinder pressure applications, and EFI systems that use feedback control.
    X-Series Wideband UEGO AFR Sensor Controller Gauge with patented X-Digital Technology, Includes X-Series Wideband Controller Gauge, Bosch LSU 4.9 Sensor, Wiring Harnesses, Black Bezel, Reversible Black AFR-Lambda Faceplate, O2 Sensor Bung

    • X-Series Wideband UEGO AFR Controller Gauges were the fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers
    • 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders
    • Black bezel and black double-sided faceplate included (silver bezel/white faceplate option sold separately, PN 30-0300-ACC)
    • Factory calibrated resistor does not require free-air calibration, but can be free-air calibrated
    • User-configurable display for changing between AFR, Lambda, and O2%, and 3- or 4-digit display
    • 52mm gauge diameter and slim 0.825″ gauge depth(Gauge cup depth only .200″ deep)
    • Auto-Sensor Detection between AEM FAE and Bosch LSU 4.9 wideband sensors
    • Patented X-Digital wideband technology (Patent 9,575,030)
    • Compatible with supply voltages up to 16V
    • Auto-dimming feature
    305.29 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    Industrial pressure sensor with threaded metal port and black plastic cap, shown with a separate brass adapter fitting on a white background.
    SKU: 30-2130-500

    AEM 34 BAR MAP or 500 PSIA Stainless Steel Sensor Kit

    No Reviews

    There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
    500 PSIg Stainless Sensor Kit, Stainless Steel Sensor Body, 1/8-inch NPT Male Thread, Includes 500 PSIg Stainless Sensor, Connector, Pins and 1/8-inch NPT to -4 Adapter

    • -Stainless steel body, with high quality sealing which makes it impervious to fluids.
    • -Includes 1/8″NPT to -4 AN adapter and barbed fitting.
    • -Weather resistant connector and pins included
    • -Accurate to 1% margin of error.
    258.73 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: TS-0701-1012

    Turbosmart Boost Gauge 0-60PSI 52mm

    No Reviews

    Turbosmart’s Electric Boost, Only Gauge, is explicitly designed for turbo diesel vehicles. Unlike Turbosmart’s mechanical boost gauge, which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-60 PSI.
    Turbosmart’s Electric Boost Only Gauge is designed specifically for turbo diesel vehicles. Unlike Turbosmart’s mechanical boost gauge which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-60 PSI.
    Includes bracket, anti-glare shield, MAP sensor, wiring harness, and PVC hose.

    • Fascia diameter: 57mm
    • Rear diameter: 52mm
    242.76 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com