0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

Whiteline 03-09 Lexus GX470 / 03-18 Toyota 4Runner Control Arms – Front Upper

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Whiteline Suspension Control Arm.

  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
  • Install guide included providing detailed instructions on how to install your new purchase .
  • Precisely placed dampening voids further reduces harshness from sudden road inputs.
  • Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

751.58 $

SKU KTA249
brand Whiteline
Add to wishlist Add to compare

Description

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Whiteline Suspension Control Arm.

  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
  • Install guide included providing detailed instructions on how to install your new purchase .
  • Precisely placed dampening voids further reduces harshness from sudden road inputs.
  • Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

Specification

Weight 18.6 kg
Dimensions 17 × 13.5 × 6.5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

9319924449194
brand

Whiteline
part_number

KTA249

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 81378

    SPC Performance Racing Audi and VW Adjustable Control Arms

    No Reviews

    Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C6 and D3 platforms. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint Don’t need the added benefits of our performance arms? Use SPC arm with OE type bushings – part #81373 for two sets of arms to correct both sides of the vehicle, #81371 for the left side, or part #81372 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • xAxis racing style sealed flex joints for reactive handling
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,500.68 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81373

    SPC Performance Audi and VW Adjustable Control Arm Kit

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81371. For the right hand (RH) side, use part number #81372. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,232.27 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: KTA252

    Whiteline 16-18 Volkswagen Golf R (MK7) Front Lower Control Arms

    No Reviews

    Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
    Whiteline Control arm – lower arm.

    • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
    • Internal grease reservoirs provide continual self lubrication for optimum friction management.
    • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
    668.08 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com