Description
Rear trailing arms for 1988-1996 Corvette. Includes 4 double adjustable trailing arms, R-Joints and hardware. Powder coated satin black.
1988-1996 Corvette
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Ridetech 89-96 Chevy C4 Corvette Rear Trailing Arms
Rear trailing arms for 1988-1996 Corvette. Includes 4 double adjustable trailing arms, R-Joints and hardware. Powder coated satin black.
1988-1996 Corvette
Specification
| Weight | 19.1 kg |
|---|---|
| Dimensions | 14.2 × 9.2 × 9.1 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 840123514257 |
| brand | Ridetech |
| part_number | 11567290 |
Related products
-
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Whiteline Control arm – lower arm.- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
-
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C8 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis seales flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will fee the difference in handling. Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81393 for two sets of arms to correct both sides of the vehicle, #81391 for the left side, or part #81392 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- xAxis racing style sealed flex joints for reactive handling
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
-
Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to 2 camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greaseable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets. Note: Rear suspension fitment excludes vehicles with Xenon headlamp option. Note: modules equipped with hydraulic bushings must be pressed out and reused from the original control arms.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
-
Adjust front camber and caster +-1.5deg on the Audi C8 platform with these forged aluminum adjustable control arms from SPC. OE style booted ball joints adn bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81391. For the right hand (RH) side, use part number #81392. SPC Arms Feature: Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weightOE style, maintenance free, booted ball joints Large 18mm threaded adjuster linksReplacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
Reviews
There are no reviews yet.