Description
Front lower StrongArms for 1988-1998 C1500. For use with Coil-Over/Shockwave. Includes a pair of tubular control arms with ball joints and delrin bushings. Powder coated satin black.
1988-1998 C1500
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Ridetech 88-98 Chevy C1500 2WD Front Lower StrongArms
Front lower StrongArms for 1988-1998 C1500. For use with Coil-Over/Shockwave. Includes a pair of tubular control arms with ball joints and delrin bushings. Powder coated satin black.
1988-1998 C1500
Specification
| Weight | 40 kg |
|---|---|
| Dimensions | 20 × 18 × 10 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 840123506207 |
| brand | Ridetech |
| part_number | 11372899 |
Related products
-
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
MOOG RK622436 Front Right Upper Suspension Control Arm and Ball Joint Assembly for Mercedes-Benz GLE350
2012-2015 Mercedes-Benz ML350 (Front Right Upper)- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
-
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
MOOG RK622464 Rear Lower Rearward Suspension Control Arm and Ball Joint Assembly for Porsche 911
2006-2012 Porsche Cayman (Rear Lower Rearward)- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
-
Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81371. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the RIGHT side only
- Comes with pinch bolt hardware
-
Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Whiteline Suspension Control Arm- Engineered for dependable performance across a wide range of conditions
- Durable materials support long-term use and consistent reliability
- Designed for straightforward installation and dependable fit
- Kit contains: 2 Arms
Reviews
There are no reviews yet.