Description
Front upper StrongArms for 1965-1970 Impala. Includes a pair of tubular control arms with ball joints, cross shafts and delrin bushings. Powder coated satin black.
1965-1970 Impala, Bel Air, etc.
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Ridetech 65-70 Impala StrongArm Upper Front
Front upper StrongArms for 1965-1970 Impala. Includes a pair of tubular control arms with ball joints, cross shafts and delrin bushings. Powder coated satin black.
1965-1970 Impala, Bel Air, etc.
Specification
| Weight | 23.9 kg |
|---|---|
| Dimensions | 19.2 × 13.8 × 13.3 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 840123504999 |
| brand | Ridetech |
| part_number | 11283699 |
Related products
-
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
MOOG RK622444 Front Left Lower Forward Suspension Control Arm and Ball Joint Assembly for Mercedes-Benz E350
2012-2016 Mercedes-Benz E300 (Front Left Lower Forward)- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
-
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
MOOG RK622464 Rear Lower Rearward Suspension Control Arm and Ball Joint Assembly for Porsche 911
2006-2012 Porsche Cayman (Rear Lower Rearward)- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
-
Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to 2 camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greaseable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets. Note: Rear suspension fitment excludes vehicles with Xenon headlamp option. Note: modules equipped with hydraulic bushings must be pressed out and reused from the original control arms.
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
-
Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the right hand (RH) side. For the left hand (LH) side, use part number #81371. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the RIGHT side only
- Comes with pinch bolt hardware
Reviews
There are no reviews yet.