Description
Front upper StrongArms for 1955-1957 Bel Air. Includes a pair of tubular control arms with tall ball joints, cross shafts and delrin bushings. Powder coated satin black.
1955-1957 Bel Air, 210 etc.
OEM & Performance Auto Parts in Canada-Wide
Select a vehicle to find exact fit parts
Ridetech 55-57 Chevy StrongArms Upper
Front upper StrongArms for 1955-1957 Bel Air. Includes a pair of tubular control arms with tall ball joints, cross shafts and delrin bushings. Powder coated satin black.
1955-1957 Bel Air, 210 etc.
Specification
| Weight | 21.4 kg |
|---|---|
| Dimensions | 16.8 × 13.9 × 13.8 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 840123500243 |
| brand | Ridetech |
| part_number | 11013699 |
Related products
-
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).
Whiteline Control arm – lower arm.- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
-
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
MOOG RK622464 Rear Lower Rearward Suspension Control Arm and Ball Joint Assembly for Porsche 911
2006-2012 Porsche Cayman (Rear Lower Rearward)- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
-
Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81372. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joints boots on these arms? We have replacement kit available! Part No. 81354. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- OE style bushing and ball joint maintain factory feel and noise reduction
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Kit includes both arms for the LEFT side only
- Comes with pinch bolt hardware
-
Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C8 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis seales flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will fee the difference in handling. Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81393 for two sets of arms to correct both sides of the vehicle, #81391 for the left side, or part #81392 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.- Kit includes both arms for both sides of the vehicle, order one kit per vehicle
- xAxis racing style sealed flex joints for reactive handling
- Forged 6051-T6 aluminum for strength and weight reduction
- Adjusts camber and caster plus or minus 1.5 degrees
- Comes with pinch bolt hardware
Reviews
There are no reviews yet.