0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

K&N 14-15 Chevy Corvette Stingray 6.2L V8 AirCharger Performance Intake

The K&N 63-3081 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3081 air intake comes with an ultra-lightweight carbon fiber K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K&N air intakes come with K&N’s No-Hassle Lifetime Limited warranty.

  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty

718.87 $

Out of stock
SKU 63-3081
brand K&N Engineering

Description

The K&N 63-3081 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3081 air intake comes with an ultra-lightweight carbon fiber K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K&N air intakes come with K&N’s No-Hassle Lifetime Limited warranty.

  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty

Specification

Weight 10.9 kg
Dimensions 24.2 × 15.3 × 14.7 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

024844356703
brand

K&N Engineering
part_number

63-3081

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 54-83043R

    aFe Magnum Force Stage-2Si Cold Air Intake System w/ Pro 5R Media BMW X5 (F15) / X6 (F16) 14-19 3.0L

    No Reviews

    Large Five Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/4″ x 6-1/2″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is best suited for street use.
    Unique Sealed Housing: The one-piece sealed housing, constructed of XLPE (cross-linked polyethylene) polymer, is used to minimize the number of components and ensure the coolest air intake charge available.
    Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.
    Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps and hardware are included. Its revolutionary design uses half the number of parts of a traditional cold air intake system.
    Magnum FORCE Stage-2Si Cold Air Intake System w/ Pro 5R Filter BMW X5 (E70/F15)/X6 (E71/F16) 11-19 3.0L (t) N55

    • Oversized, Heat-Resistant Sealed Housing Gathers Larger Amounts of Cool Air
    • Washable and Reusable Pro 5R Air Filter
    • Measured Flow: 350 CFM @ 7 IN H2O
    • Outflows Factory Intake by 15%
    • +51 lbs. x ft. TQ & +24 HP
    655.89 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 21-825DS

    AEM C.A.S 07-11 BMW 335i V6-3.0L F/I Cold Air Intake System

    No Reviews

    This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.
    AEM’s Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.

    • Utilizes washable, reusable, oil-free synthetic filter media that preserves airflow efficiency, traps harmful contaminants, and provides long-term value over disposable filters.
    • AEM Lifetime Limited Warranty
    435.42 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 51-82082-1

    aFe MagnumFORCE Intake Stage-2 Si Pro DRY S 11-16 BMW 535i (F10) L6 3.0L (t) N55

    No Reviews

    Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
    Magnum FORCE Stage-2Si Cold Air Intake System w/ Pro DRY S Filter BMW 535i (F07/10) 11-17 / 640i (F06/12/13) 11-19 L6-3.0L (t) N55

    • Repl. Factory Intake For Improved HP/Torque/Styling
    • Uses Pro DRY S Air Filter For Maximum Convenience
    • Rotomolded Plastic Tube For Maximum Air Flow
    • Improved Throttle Response
    684.65 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 69-2027TS

    K&N 12-15 BMW 335i 3.0L L6 F/I Typhoon Performance Intake

    No Reviews

    Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
    K&N’s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty.

    • K&N Million Mile Limited Warranty
    • Will not void vehicle warranty.
    506.63 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com