0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 317.99 $

Injen 18-21 Subaru WRX STI H4-2.5L Turbo SP Aluminum Series Cold Air Intake – Wrinkle Black

Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine. The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI. The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it’s full power potential with a simple drop-in install. To top it all off, no tune is required to get the power numbers noted!
SP Aluminum Series Short Ram Air Intake System, Part No. SP1208WB, 2018-2021 Subaru WRX STI H4-2.5L Turbo

  • Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • Injen’s MR Technology provides massive power gains while maintaining A/F ratios
  • Includes custom heat shield specifically designed for this application
  • Smooth intake piping eliminates restrictions and improves airflow
  • Dyno Proven gains of up to 26 hp and 24 lb-ft. of torque
  • No additional tuning required and no check engine lights
  • Huge 3.250in mandrel-bent 6061-T6 aluminum intake tubing
  • Fully serviceable Injen SuperNano-Web dry air filter
  • Features Injen’s patented MegaRam (MR) Technology
  • Replacement air filter part number X-1059-BB
  • Aggressive engine tone under full throttle
  • Injen Technology Limited Lifetime Warranty
  • Optional Hydroshield part number 1040BLK
  • Available in multiple finishes
  • Made in Pomona California, USA
  • Short Ram Air Intake Design
  • SP1208WB (Wrinkle Black)
  • SP1208WR (Wrinkle Red)
  • SP1208P (Polished)

369.10 $

SKU SP1208WB
brand Injen
Add to wishlist Add to compare

Description

Injen Technology has done it once again with this new short ram air intake for the 2018-2021 Subaru WRX STI Equipped with the H4-2.5L Turbo Engine. The Injen Technology SP1208 performance air intake system is the result of countless hours invested in research and development to provide a proven intake system designed to add power and performance to your STI. The Injen Technology SP1208 intake system is a direct replacement for that restrictive factory airbox and provides a engineered solution that allows that turbo to breathe deeply and produce it’s full power potential with a simple drop-in install. To top it all off, no tune is required to get the power numbers noted!
SP Aluminum Series Short Ram Air Intake System, Part No. SP1208WB, 2018-2021 Subaru WRX STI H4-2.5L Turbo

  • Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • Injen’s MR Technology provides massive power gains while maintaining A/F ratios
  • Includes custom heat shield specifically designed for this application
  • Smooth intake piping eliminates restrictions and improves airflow
  • Dyno Proven gains of up to 26 hp and 24 lb-ft. of torque
  • No additional tuning required and no check engine lights
  • Huge 3.250in mandrel-bent 6061-T6 aluminum intake tubing
  • Fully serviceable Injen SuperNano-Web dry air filter
  • Features Injen’s patented MegaRam (MR) Technology
  • Replacement air filter part number X-1059-BB
  • Aggressive engine tone under full throttle
  • Injen Technology Limited Lifetime Warranty
  • Optional Hydroshield part number 1040BLK
  • Available in multiple finishes
  • Made in Pomona California, USA
  • Short Ram Air Intake Design
  • SP1208WB (Wrinkle Black)
  • SP1208WR (Wrinkle Red)
  • SP1208P (Polished)

Specification

Weight 7.5 kg
Dimensions 25.4 × 13.6 × 8.8 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

false
units_per_sku

1
upc

843115029753
brand

Injen
part_number

SP1208WB

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 50-40045D

    aFe Power 15-19 BMW X5 M (F85)/X6 M (F86) V8-4.4L (tt) S63 Cold Air Intake System w/ Pro DRY S Media

    No Reviews

    The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. The Momentum ST intake is designed around an oil-free, large 9″ Tall conical flat top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel worm gear clamps and a silicone coupler are used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.
    Momentum ST Cold Air Intake System w/ Pro DRY S Filter BMW X5 M (F85) / X6 M (F86) 15-19 V8-4.4L (tt) S63

    • No Cutting Or Drilling On Factory Parts For Faster Install
    • Unique Filter-To-Housing Interface For Easy Installation
    • Pro DRY S Oil-Free Washable/Reusable Filter
    • CAD-Designed Roto-Molded Intake Tube
    734.00 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: MMAI-E46-01BK

    Mishimoto 01-06 BMW 330i 3.0L Performance Air Intake

    No Reviews

    Mishimoto has developed a performance air intake engineered specifically for the 2001–2006 BMW E46 330i. This E46 intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone, and the free-flowing design amplifies engine induction sounds. The stock E46 intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The E46 intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air in. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance E46 intake kit is also fully functional with the Mishimoto Silicone E46 Intake Hoses. As with all Mishimoto E46 parts, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
    Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.
    2001-2003 BMW 330Ci Base 3.0 Liter 5HP-19, 2003-2006 BMW 330Ci Base 3.0 Liter 5L40-E, 2001-2003 BMW 330Ci Base 3.0 Liter S5D310Z, 2004-2006 BMW 330Ci Base 3.0 Liter S6-37BZ, 2004-2005 BMW 330Ci Base 3.0 Liter S6S37BZ, 2001-2003 BMW 330i Base 3.0 Liter 5HP-19, 2003-2005 BMW 330i Base 3.0 Liter 5L40-E, 2006 BMW 330i Base 3.0 Liter A6HP19Z, 2001-2003 BMW 330i Base 3.0 Liter S5D310Z, 2004-2006 BMW 330i Base 3.0 Liter S6-37BZ, 2004-2006 BMW 330i Base 3.0 Liter S6-37BZ, 2004-2005 BMW 330i Base 3.0 Liter S6S37BZ, 2001-2005 BMW 330xi Base 3.0 Liter 5L40-E, 2006 BMW 330xi Base 3.0 Liter GA6HP19Z, 2006 BMW 330xi Base 3.0 Liter GS6X37BZ, 2001-2003 BMW 330xi Base 3.0 Liter S5D310Z, 2004-2005 BMW 330xi Base 3.0 Liter S6X37BZ

    • Dyno proven peak gains of 7 whp and 9 wtq on the stock tune
    • Highly aggressive intake tone under acceleration
    • No tune required
    289.95 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 58-10005D

    aFe Black Series Stage-2 Carbon Fiber Cold Air Intake System w/ Pro DRY S Media – 18-19 BMW M5 (F90)

    No Reviews

    These 7″ tall, 360-degree radial flow air filters were specially designed to be installed through the M5’s strut braces, maximizing airflow and making for an easy installation. They feature our oil-free Pro DRY S media with three layers of progressively finer synthetic media for maximum convenience. This media is perfect for street use. The air filters are surrounded by heat-resistant XLPE polymer housings. Covers, constructed from 100% twill weave carbon fiber, are secured to the housings with premium aFe POWER branded hardware – making for an aggressive style and simple air filter inspection. Lightweight, high gloss, twill weave carbon fiber tubes direct filtered air from the air filters to the engine. Using computer design software and dyno tuning, they’re designed to achieve maximum power gains while maintaining a perfect fit. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, premium hardware, and a Black Series plate are included. Optional 100% carbon fiber Dynamic Air Scoops (sold separately P/N: 58-10005SC) are available to bring more cool air from the kidney grilles into the intake housings
    Black Series Stage-2 Carbon Fiber Cold Air Intake System w/ Pro DRY S Filter BMW M5 (F90) 18-23 V8-4.4L (t) S63

    • Carbon Fiber Air Scoops (Sold Separately P/N: 58-10005SC) Direct Cool Air to Intake System From Kidney Grilles
    • Premium aFe POWER Branded Laser-Etched Hardware and Exclusive Black Series Plate Included
    • Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
    • Tubes w/ Heat Resistant Plastic Housings
    1,461.00 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 58-10005R

    aFe Momentum Black Series Carbon Fiber Pro 5R Air Intake System BMW M5 (F90) 18-19

    No Reviews

    These 7″ tall, 360-degree radial flow air filters were specially designed to be installed through the M5’s strut braces, maximizing airflow and making for an easy installation. They feature our high-flowing pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. This media is perfect for street and/or track use. The air filters are surrounded by heat-resistant XLPE polymer housings. Covers, constructed from 100% twill weave carbon fiber, are secured to the housings with premium aFe POWER branded hardware – making for an aggressive style and simple air filter inspection. Lightweight, high gloss, twill weave carbon fiber tubes direct filtered air from the air filters to the engine. Using computer design software and dyno tuning, they’re designed to achieve maximum power gains while maintaining a perfect fit. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, premium hardware, and a Black Series plate are included. Optional 100% carbon fiber Dynamic Air Scoops (sold separately P/N: 58-10005SC) are available to bring more cool air from the kidney grilles into the intake housings.
    Black Series Stage-2 Carbon Fiber Cold Air Intake System w/ Pro 5R Filter BMW M5 (F90) 18-23 V8-4.4L (t) S63

    • Carbon Fiber Air Scoops (Sold Separately P/N: 58-10005SC) Direct Cool Air to Intake System From Kidney Grilles
    • Premium aFe POWER Branded Laser-Etched Hardware and Exclusive Black Series Plate Included
    • Washable and Reusable Pro 5R Air Filters for Maximum Performance
    1,461.00 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com