0
3
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
3 Shopping Cart 1,413.95 $

Injen 17-19 Ford F-250 Super Duty V8-6.7L Turbo Diesel Evolution Intake (Oiled)

Your search for the best performing cold air intake that also protects your valuable 2017-2019 Ford F-Series Super Duty is over. You just found the Injen EVO9004C that is specifically engineered for the 2017-2019 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. The engineers at Injen designed a custom battery relocation box that allows the airbox to be moved safely to the front of the engine bay. This swap provides two benefits. The first benefit is moving the airbox closer and in direct alignment with the factory air inlet to feed cool, fresh air to that hungry turbo diesel. The second benefit from moving the airbox forward is the path for the intake tract is now smoothed out and requires far less bends. This results in a further reduction in restriction and increased power output.
EVOLUTION Cold Air Intake System, Part No. EVO9004C, 2017-2019 Ford Diesel Trucks V8-6.7L Powerstroke

  • This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
  • Battery relocation tray allows the airbox to be moved for a cooler air charge and reduced restriction
  • Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
  • No Tune Required – Designed to work seamless with the stock calibration
  • Intake tube features Injen’s patented internal MegaRam (MR) Technology
  • Durable XLPE Roto-Molded Polyethylene tube, Battery Tray, and housing
  • Also available with a dry air filter ? Intake system P/N EVO9004
  • Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
  • Aggressive under hood appearance while maintaining an OE fit
  • Dyno Proven gains of up to 20 hp and 41 lb.-ft. of torque
  • Utilizes our patented Twist-Lock Filter attachment system
  • Optional Injen air filter cleaning kit part number X-1030
  • Stainless steel band clamps with inner protective liner
  • Reinforced automotive grade silicone couplers
  • Injen Technology Limited Lifetime Warranty
  • Replacement air filter # X-1113-BR
  • Made in Pomona California, USA

380.05 $

SKU EVO9004C
brand Injen
Add to wishlist Add to compare

Description

Your search for the best performing cold air intake that also protects your valuable 2017-2019 Ford F-Series Super Duty is over. You just found the Injen EVO9004C that is specifically engineered for the 2017-2019 Ford Super Duty trucks equipped with the 6.7L Power Stroke diesel engine. The engineers at Injen designed a custom battery relocation box that allows the airbox to be moved safely to the front of the engine bay. This swap provides two benefits. The first benefit is moving the airbox closer and in direct alignment with the factory air inlet to feed cool, fresh air to that hungry turbo diesel. The second benefit from moving the airbox forward is the path for the intake tract is now smoothed out and requires far less bends. This results in a further reduction in restriction and increased power output.
EVOLUTION Cold Air Intake System, Part No. EVO9004C, 2017-2019 Ford Diesel Trucks V8-6.7L Powerstroke

  • This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
  • Battery relocation tray allows the airbox to be moved for a cooler air charge and reduced restriction
  • Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
  • No Tune Required – Designed to work seamless with the stock calibration
  • Intake tube features Injen’s patented internal MegaRam (MR) Technology
  • Durable XLPE Roto-Molded Polyethylene tube, Battery Tray, and housing
  • Also available with a dry air filter ? Intake system P/N EVO9004
  • Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
  • Aggressive under hood appearance while maintaining an OE fit
  • Dyno Proven gains of up to 20 hp and 41 lb.-ft. of torque
  • Utilizes our patented Twist-Lock Filter attachment system
  • Optional Injen air filter cleaning kit part number X-1030
  • Stainless steel band clamps with inner protective liner
  • Reinforced automotive grade silicone couplers
  • Injen Technology Limited Lifetime Warranty
  • Replacement air filter # X-1113-BR
  • Made in Pomona California, USA

Specification

Weight 17.6 kg
Dimensions 33.9 × 17 × 13.8 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
upc

843115028589
brand

Injen
part_number

EVO9004C

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 57-1003

    K&N 01-05 BMW M3 3.2L F/I Performance Intake Kit

    No Reviews

    A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
    K&N’s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty.

    • K&N Million Mile Limited Warranty
    • Will not void vehicle warranty
    317.99 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 54-13030R

    aFe POWER Magnum FORCE Stage-2 Pro 5R Cold Air Intake System 12-19 BMW M5 (F10) / M6 (F12/13)

    No Reviews

    These 360-degree radial flow air filters feature a 4″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and deliver the highest power gains in most cases. This media is perfect for street and/or track use. The included massive air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of their air filters and delivers an aggressive Air Intake sound. In addition to the system’s built-in air inlets, optional Dynamic Air Scoops (sold separately) are available to bring more cool air from the front of the vehicle into the intake housing (PN 54-12489-C). This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
    Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Filter BMW M5 (F10) / M6 (F06/12/13) 12-19 V8-4.4L (t) S63

    • Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
    • Open-Element Design Showcases the Air Filters and Delivers an Aggressive Air Intake Sound
    • Optional Carbon Fiber Scoops Can be Used to Bring in Additional Cool Air
    • Washable and Reusable Pro 5R Air Filters for Maximum Performance
    • Dyno-Proven Gains up to +31 HP & +26 Lbs. x Ft. TQ
    • Measured Flow: 595 CFM @ 7″ H2O
    • Outflows Factory Intake by 19%
    646.00 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SP1110WB

    Injen 99-00 BMW 323i E46 2.5L/99-00 328 E46 2.8L/01-05 325 E46 2.5L Wrkl Blk Short Ram Intake w/MR

    No Reviews

    Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
    Short Ram Air Intake System; Incl. Heat Shield w/Top Lid/Filter/Hardware/Instruction; HP Gains +10.0 HP/Torque Gains +9.0 ft. lbs.; Wrinkle Black;
    BMW 1999-00 E46 323i 2.5L L6 Tuned short ram with brushed heatshield cover and Super nano web dry filter

    • This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
    • Smooth intake piping eliminates restrictions and improves airflow
    • Includes custom heat shield with high-flow velocity stack
    • Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
    • Fully serviceable Injen SuperNano-Web dry air filter
    • Provides power gains while maintaining A/F ratios
    • Replacement air filter part number X-1045-BB
    • Aggressive engine tone under full throttle
    • Injen Technology Limited Lifetime Warranty
    • Optional hydroshield part number 1052BLK
    • Increased Torque Up To 9 ft./lbs.
    • 6061-T6 aluminum intake tubing
    • Available in multiple finishes
    • Made in Pomona, California USA
    • No additional tuning required
    • Short Ram Air Intake Design
    274.63 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: SP1122P

    Injen 12-16 BMW 328i F30 N20/N26 2.0L (t) 4cyl Polished Short Ram Intake w/MR Tech & Air Box w/Scoop

    No Reviews

    Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that’s not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!
    SP Short Ram Air Intake System, Part No. SP1122P, 2014-2016 BMW 220i/228i/xDrive (F22) L4-2.0L(t), 2013-2018 BMW 320i/xDrive (F3x) L4-2.0L(t), 2012-2016 BMW 328i/xDrive (F3x) L4-2.0L(t), 2014-2016 BMW 420i/428i/xDrive (F3x) L4-2.0L(t).
    BMW 2014-16 428i/ix F36 N26/N20 2.0L 4 cyl. TurboTuned air intake w/MR Tech; lower air box; air box cover and nano-web dry filter

    • This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
    • Includes custom heat shield specifically designed for this application
    • Smooth intake piping eliminates restrictions and improves airflow
    • Dyno Proven gains of up to 10 hp and 22 lb-ft. of torque
    • Fully serviceable Injen SuperNano-Web dry air filter
    • Provides power gains while maintaining A/F ratios
    • Features Injen’s patented Air Fusion Technology
    • Replacement air filter part number X-1059-BB
    • Aggressive engine tone under full throttle
    • Injen Technology Limited Lifetime Warranty
    • Increased Torque Up To 22 ft./lbs.
    • 6061-T6 aluminum intake tubing
    • Available in multiple finishes
    • Made in Pomona, California USA
    • No additional tuning required
    • Short Ram Air Intake Design
    446.52 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 3 Cart Garage
support@ucperformance.com