0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

MBRP 2025+ RAM 1500 3.0L Pro Series 3.0in Cat-Back Dual Rear Exit Exhaust – CF Tips

THE ONLY EXHAUST YOU”LL EVER NEED – MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel – the most durable material grade that money can buy.
The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Armor Pro Cat Back Exhaust System; 3 in. Diameter; 2.5 in. Dual Split Rear; 5 in. Carbon Fiber Tips; 304 Stainless Steel;
5in. Outside Diameter Carbon Fiber Tips Included. Excludes vehicles with factory equipped dual inlet mufflers.

  • Durable T304 stainless steel construction. Rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD carbon fiber tips included. Enhanced moderate exhaust tone. 18 percent flow increase.
  • Durable T304 Stainless Steel Construction
  • 5 inch OD carbon fiber tips included
  • Smooth 3 inch mandrel bent tubing
  • Enhanced Moderate Exhaust Tone
  • 18 percent flow increase
  • Clamps Included
  • Rust Resistant

1,506.22 $

SKU S51563CF
brand MBRP
Add to wishlist Add to compare

Description

THE ONLY EXHAUST YOU”LL EVER NEED – MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel – the most durable material grade that money can buy.
The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Armor Pro Cat Back Exhaust System; 3 in. Diameter; 2.5 in. Dual Split Rear; 5 in. Carbon Fiber Tips; 304 Stainless Steel;
5in. Outside Diameter Carbon Fiber Tips Included. Excludes vehicles with factory equipped dual inlet mufflers.

  • Durable T304 stainless steel construction. Rust resistant. Smooth 3 inch mandrel bent tubing. Clamps included. 5 inch OD carbon fiber tips included. Enhanced moderate exhaust tone. 18 percent flow increase.
  • Durable T304 Stainless Steel Construction
  • 5 inch OD carbon fiber tips included
  • Smooth 3 inch mandrel bent tubing
  • Enhanced Moderate Exhaust Tone
  • 18 percent flow increase
  • Clamps Included
  • Rust Resistant

Specification

Weight 70.1 kg
Dimensions 46 × 16 × 11.2 cm
air_freight_prohibited

false
not_carb_approved

false
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
regular_stock

t
units_per_sku

1
brand

MBRP
part_number

S51563CF

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 3020-42070

    AWE Tuning 18-19 BMW M5 (F90) 4.4T AWD Cat-back Exhaust – Track Edition (Chrome Silver Tips)

    No Reviews

    If raw and rowdy are your speed, the Track Edition Cat Back is your dose of steel. The Track Edition Exhaust retains all the engineering and precision of the SwitchPath™ Exhaust, including the X-pipe and 3” diameter tubing, minus the valves in the rear sections. The result? Constant rumble. Warning! These versions are known to get rowdy, and may be too much for many. For that reason, this particular version cannot be returned due to sound preference. Prepare yourself. The included Performance Mid Pipes replace the factory mid section with a 3” stainless steel X-pipe, mating to the factory Axle Back.AWE’s signature 4″ double walled slash-cut tips finish it off — all individually adjustable, allowing depth into the bumper to be set according to personal taste. Available in Diamond Black or Chrome Silver.
    AWE Track Edition Catback Exhaust for BMW F90 M5 – Chrome Silver Tips

    • Peak gains of 4 hp and 4 lb-ft of torque, max gains of 22 hp and 18 lb-ft of torque, at the wheels
    • Handcrafted from dual 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
    • Included Performance Mid Pipes and catbacks feature a precision-engineered x-pipe
    • 21 lb weight savings over stock with the Track Edition Cat Back Exhaust
    • Designed, engineered, and manufactured in-house at AWE
    • Catbacks are pure bolt-on for factory-like simplicity
    • Less is more: clean, straight-through design
    • AWE No Check Engine Light Guarantee
    • Perfect fitment, guaranteed
    • Lifetime Warranty
    2,540.05 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 3020-43052

    AWE Tuning Audi C7 / C7.5 S7 4.0T Track Edition Exhaust – Diamond Black Tips

    No Reviews

    The Track Edition Exhaust takes the engineered design of the Touring Edition Exhaust and replaces the AWE 180 Technology® resonators with straight pipe sections, delivering an even bigger dose of 4.0T attitude. This system is known to get rowdy in the mid-range, and may be a bit much for many. For that reason, this system can’t be returned due to sound (this system’s about commitment). However, the Track Edition Exhaust *can* be converted at a later date to a Touring Edition Exhaust (or vice versa). All systems are finished off with AWE’s quad slash-cut 102mm tips, including the AWE logo, and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. AWE Electronic Valve Simulators are sold separately – but here’s why you might want them: When valves are removed, the ECU stores what is known as a ‘soft code’. While this code is not harmful, who wants it? Enter the AWE Electronic Valve Simulators. These simple devices plug right into the factory harness in place of the exhaust valves, and prevent any code from ever being stored in the ECU due to the removal of the exhaust valves. Plug them in. Start it up. Drive away. That simple. Comes as a set of two. This exhaust is for those who like to take it up a notch… and leave it there.
    AWE Track Edition Exhaust for Audi C7 S7 4.0T – Diamond Black Tips

    • System includes exhaust, non-resonated downpipes, and quad 102mm tips
    • No modifications made to the emissions equipment
    • Peak gains of 18 hp and 6 lb-ft of torque
    • Max gains of 27 hp and 31 lb-ft of torque
    • No Check Engine Light – Guaranteed
    • Perfect Fitment – Guaranteed
    • Lifetime Warranty
    • Direct bolt-on
    3,252.09 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 49-36306

    aFe MACHForce XP 11-12 BMW 335i L6-3.0L N55 E90/92 304SS 2.75in. Cat-Back Exhaust System

    No Reviews

    The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.
    MACH Force-Xp 2-3/4 IN 304 Stainless Steel Cat-Back Exhaust System BMW 335i (E90/92) 11-12 L6-3.0L (t) N55

    • 2.75 in. Mandrel Bent 409 Stainless Steel Tubing
    • Bayonet Style Hangers For Easy Installation
    • Polished Stainless Tip Included
    • 2 Year Limited Warranty
    • High Flow Muffler
    • Maximum Flow
    3,064.49 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 3020-42044

    AWE Tuning Audi C7 / C7.5 S7 4.0T Track Edition Exhaust – Chrome Silver Tips

    No Reviews

    The Track Edition Exhaust takes the engineered design of the Touring Edition Exhaust and replaces the AWE 180 Technology® resonators with straight pipe sections, delivering an even bigger dose of 4.0T attitude. This system is known to get rowdy in the mid-range, and may be a bit much for many. For that reason, this system can’t be returned due to sound (this system’s about commitment). However, the Track Edition Exhaust *can* be converted at a later date to a Touring Edition Exhaust (or vice versa). All systems are finished off with AWE’s quad slash-cut 102mm tips, including the AWE logo, and double walling to ensure a mirror finish even under hard usage. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste. AWE Electronic Valve Simulators are sold separately – but here’s why you might want them: When valves are removed, the ECU stores what is known as a ‘soft code’. While this code is not harmful, who wants it? Enter the AWE Electronic Valve Simulators. These simple devices plug right into the factory harness in place of the exhaust valves, and prevent any code from ever being stored in the ECU due to the removal of the exhaust valves. Plug them in. Start it up. Drive away. That simple. Comes as a set of two. This exhaust is for those who like to take it up a notch… and leave it there.
    AWE Track Edition Exhaust for Audi C7 S7 4.0T – Chrome Silver Tips

    • System includes exhaust, non-resonated downpipes, and quad 102mm tips
    • No modifications made to the emissions equipment
    • Peak gains of 18 hp and 6 lb-ft of torque
    • Max gains of 27 hp and 31 lb-ft of torque
    • No Check Engine Light – Guaranteed
    • Perfect Fitment – Guaranteed
    • Lifetime Warranty
    • Direct bolt-on
    3,252.09 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com