0
1
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
1 Shopping Cart 473.22 $

MagnaFlow Direct Fit Catalytic Converter 06-08 VW Rabbit 2.5L

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49990 includes (1) Flange Gasket, (1) O2 Port Plug and interchanges with OE parts 1K0 253 058 FJ, 1K0 253 058 FK, 1K0 254 503 B, 1K0 254 503 C, 1K0 254 503 S, 1K0 254 506 T, 1K0 254 507, 1K0 254 507 E, 1K0 254 510 L, 1K0 254 510 T, 1K0 254 510 TX, 1K0 254 511, 1K0 254 511 H, 1K0 254 511 P, 1K0 254 512 R, 1K0 254 512 S, 5C0 253 059 AG, 5C0 253 059 AL, 5C0 253 059 AM, 5C0 253 059 AT, 5C0 254 500 Q. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2014 Volkswagen Jetta, 2012-2014 Volkswagen Passat, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 253 058 FJ and 1K0 254 510 L, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
  • OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
  • Your Trusted Source For EPA-Compliant Catalytic Converters
  • Mandrel Bent Tubing Retains Oem-Like Design And Geometry
  • Durable 308 Stainless Steel Mig Welds

1,775.98 $

Out of stock
SKU 49990
brand Magnaflow

Description

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49990 includes (1) Flange Gasket, (1) O2 Port Plug and interchanges with OE parts 1K0 253 058 FJ, 1K0 253 058 FK, 1K0 254 503 B, 1K0 254 503 C, 1K0 254 503 S, 1K0 254 506 T, 1K0 254 507, 1K0 254 507 E, 1K0 254 510 L, 1K0 254 510 T, 1K0 254 510 TX, 1K0 254 511, 1K0 254 511 H, 1K0 254 511 P, 1K0 254 512 R, 1K0 254 512 S, 5C0 253 059 AG, 5C0 253 059 AL, 5C0 253 059 AM, 5C0 253 059 AT, 5C0 254 500 Q. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2014 Volkswagen Jetta, 2012-2014 Volkswagen Passat, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 253 058 FJ and 1K0 254 510 L, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

  • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
  • OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
  • Your Trusted Source For EPA-Compliant Catalytic Converters
  • Mandrel Bent Tubing Retains Oem-Like Design And Geometry
  • Durable 308 Stainless Steel Mig Welds

Specification

Weight 11.8 kg
Dimensions 43.7 × 9.9 × 7.9 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

N
part_type

automotive
epa

Compliant
regular_stock

false
units_per_sku

1
upc

841380054654
brand

Magnaflow
part_number

49990

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 5582586

    Magnaflow 07-10 Audi Q7 3.6L Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582586. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2010 Audi Q7 3.6L & 2010 Volkswagen Touareg 3.6L. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Direct-Fit Catalytic Converter
    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582586. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2010 Audi Q7 and 2010 Volkswagen Touareg. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

    • Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
    • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
    • Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
    • Durable 308 Stainless Steel MIG Welds
    2,905.65 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5461903

    Magnaflow 06-08 Audi A4 Quattro 3.2L Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461903. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2008 Audi A4 Quattro and interchanges with OE part 8E0 254 506 LX. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Direct-Fit Catalytic Converter
    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461903. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2008 Audi A4 Quattro and interchanges with OE part 8E0 254 506 LX. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

    • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
    • Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
    • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
    • Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
    • Durable 308 Stainless Steel MIG Welds
    2,577.02 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5421205

    Magnaflow Conv Uni CA 2.25in./2.25in. Straight Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5421205. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Universal Catalytic Converter-2.25in.
    Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

    • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
    • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
    • Durable 308 Stainless Steel MIG Welds
    461.45 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 1 Cart Garage
support@ucperformance.com