0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

MagnaFlow Conv DF 98-03 Mercedes E320 3.2L

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24042. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2003-2005 Mercedes-Benz E320, 2003-2006 Mercedes-Benz E500, and more, this direct-fit catalytic converter also interchanges with OE parts 211 490 09 19 80 and 211 490 56 19 80, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

  • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Your Trusted Source For EPA-Compliant Catalytic Converters
  • Mandrel Bent Tubing Retains Oem-Like Design And Geometry
  • Durable 308 Stainless Steel Mig Welds

1,028.34 $

Out of stock
SKU 24042
brand Magnaflow

Description

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24042. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2003-2005 Mercedes-Benz E320, 2003-2006 Mercedes-Benz E500, and more, this direct-fit catalytic converter also interchanges with OE parts 211 490 09 19 80 and 211 490 56 19 80, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

  • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
  • Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
  • Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
  • Simplifies installation with essential gaskets and hardware being included in the box
  • Your Trusted Source For EPA-Compliant Catalytic Converters
  • Mandrel Bent Tubing Retains Oem-Like Design And Geometry
  • Durable 308 Stainless Steel Mig Welds

Specification

Weight 15 kg
Dimensions 44 × 10 × 8 cm
air_freight_prohibited

false
not_carb_approved

true
carb_acknowledgement_required

true
ltl_freight_required

false
prop_65

N
part_type

automotive
epa

Compliant
regular_stock

false
units_per_sku

1
upc

841380066336
brand

Magnaflow
part_number

24042

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 47-46303

    aFe Direct Fit Catalytic Converter 05-08 BMW Z4 M Roadster/Coupe (E85/E86) L6 3.2L (S54)

    No Reviews

    Replace your faulty catalytic converter with aFe POWER’s direct-fit catalytic converter. 100% hand MIG-welded, mandrel bent, 409 stainless steel tubing for strength and durability, this affordable, direct-fit converter is EPA compliant and utilizes factory mounting locations, OE style flanges and includes quality hardware for a quick, bolt-on install. This direct-fit catalytic converter replacement is constructed of 100% hand MIG-welded, mandrel bent, 409 stainless steel tubing for strength and durability.
    aFe POWER Direct Fit 409 Stainless Steel Catalytic Converter BMW Z4 M (E85/86) 06-08 L6-3.2L S54

    • Utilizes Factory Mounting Locations
    • 100% MIG Welded
    • EPA Compliant
    1,304.94 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5451400

    Magnaflow 11-15 Audi Q7 3.0L Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5451400. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Audi Q7. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Direct-Fit Catalytic Converter
    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5451400. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2014 Audi Q7. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
    • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
    • Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
    • Durable 308 Stainless Steel MIG Welds
    2,928.93 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 551414

    Magnaflow 08-13 Audi A3 2.0L Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551414. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2013 Volkswagen Jetta, 2008-2013 Volkswagen GTI, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 254 512 PX and 1K0 254 508 QX, among others. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Direct-Fit Catalytic Converter
    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 551414. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2013 Volkswagen Jetta, 2008-2013 Volkswagen GTI, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 254 512 PX and 1K0 254 508 QX, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

    • Torca AccuSeal® Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force Preventing Pipe Distortion
    • Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
    • OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
    • High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
    • Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
    • Durable 308 Stainless Steel MIG Welds
    2,478.43 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 5461003

    Magnaflow 06-09 Audi A6 3.2L Direct Fit Converter

    No Reviews

    Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461003. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2009 Audi A6 and interchanges with OE part 4A0 253 057 EX. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
    Magnaflow California Direct-Fit Catalytic Converter
    Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

    • Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
    • Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
    • Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
    • Durable 308 Stainless Steel MIG Welds
    3,375.32 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com