Edelbrock Perf RPM Cam and Lifters Kit Olds 350-403

Description

Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high-performance’s street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: – Duration @ .050 Intake: 224 degrees – Duration @ .050 Exhaust: 234 degrees – Lift @ Valve Intake: .496″ – Lift @ Valve Exhaust: .520″ – Lobe Separation: 112 Degrees – Intake Centerline: 107 Degrees – Idle Vacuum @ 1000 RPM’s: 12″
Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine.
Oldsmobile:Small-Block:330 (5.4L)/350 (5.7L)/403 (6.6L)

• Take the Guesswork Out of Camshaft Selection!