0
0
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
0 Shopping Cart 0.00 $

EBC S3 Brake Pad and Rotor Kit

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you desire a modest brake improvement for normal speeds on any SUV or Light Truck this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Matched with spot drilled and wide aperture slotted sport vented rotors for cooler brakes and lifetime perfect flat and parallel pad wear finished with Geomet anti rust coating. Wider aperture slots draw cool air under braking area and remove dirt dust and debris faster.
S3 Kits Greenstuff 6000 and GD Rotors Truck/SUV; Front; FMSI Pad No. D1631; Vented; 8 Bolt Holes; 347mm Dia.; 100mm Height; 38mm Thick; 129mm Center Hole Dia.;

  • Perfect For Moderately Upgraded Trucks And Light Towing
  • Direct Fit; No Changes Required Over Stock Set Up
  • Wide Aperture Slotted G3000 Sport Rotors
  • 10;000 Mile No Hassle Warranty
  • Improved Braking Over OE Pads
  • Truck/SUV Upgrade Brakes
  • Geomet Anti Rust Coating

1,011.10 $

Out of stock
SKU S3KF1281
brand EBC

Description

Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors pads rotors and caliper lube. If you desire a modest brake improvement for normal speeds on any SUV or Light Truck this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Matched with spot drilled and wide aperture slotted sport vented rotors for cooler brakes and lifetime perfect flat and parallel pad wear finished with Geomet anti rust coating. Wider aperture slots draw cool air under braking area and remove dirt dust and debris faster.
S3 Kits Greenstuff 6000 and GD Rotors Truck/SUV; Front; FMSI Pad No. D1631; Vented; 8 Bolt Holes; 347mm Dia.; 100mm Height; 38mm Thick; 129mm Center Hole Dia.;

  • Perfect For Moderately Upgraded Trucks And Light Towing
  • Direct Fit; No Changes Required Over Stock Set Up
  • Wide Aperture Slotted G3000 Sport Rotors
  • 10;000 Mile No Hassle Warranty
  • Improved Braking Over OE Pads
  • Truck/SUV Upgrade Brakes
  • Geomet Anti Rust Coating

Specification

air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
clearance_item

t
regular_stock

false
units_per_sku

1
brand

EBC
part_number

S3KF1281

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: GD1390

    EBC 08-10 BMW 535i 3.0 Turbo (E60) GD Sport Front Rotors

    No Reviews

    All EBC rotors are made from OE spec grey cast iron, exactly as used on new car production and as many as we have tools for are BRITISH MADE wholly in our own UK foundry. Currently EVERY SINGLE ROTOR sold in Europe and the UK is BRITISH MADE and a majority of the designs specific to the USA are also BRITISH made.The British foundry is constantly expanding its in house tooled range but EBC like every brake manufacturer ….does need occasionally to buy some rotors in from approved sources to complete ranges in overseas markets. None of our competitors will ever tell you where their rotors come from and we at EBC are as disappointed as the rest of the world that cost pressure means there is not ONE foundry left in the USA to supply such parts, other brake brands when asked about origin will just sidestep the question. When we do buy rotors in, they are specified, sampled, tested for element analysis, grain structure, tensile strength, hardness and optimum ductility and tested 100 piece by piece to be perfect for runout on this in house machine.
    3GD Series Sport Slotted Rotor Set; Front; For FMSI Pad No. D918; Vented; 5 Bolt Holes; 348mm Dia.; 77mm Height; 30mm Thick; 79mm Center Hole Dia.;

    • Removes Dirt Dust And Debris From Braking Zone
    • Anodized For Protection/Black For Domestics
    • Reduces Brake Fade Under Load And At Speed
    • Great For Truck/SUV/Towing/For Sedan Use
    • Anodized For Protection/Gold For Imports
    • Wide Slots Helps Brakes Run Cooler
    564.27 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: GD1817

    EBC 11+ BMW 528 2.0 Turbo (F10) GD Sport Rear Rotors

    No Reviews

    All EBC rotors are made from OE spec grey cast iron, exactly as used on new car production and as many as we have tools for are BRITISH MADE wholly in our own UK foundry. Currently EVERY SINGLE ROTOR sold in Europe and the UK is BRITISH MADE and a majority of the designs specific to the USA are also BRITISH made.The British foundry is constantly expanding its in house tooled range but EBC like every brake manufacturer ….does need occasionally to buy some rotors in from approved sources to complete ranges in overseas markets. None of our competitors will ever tell you where their rotors come from and we at EBC are as disappointed as the rest of the world that cost pressure means there is not ONE foundry left in the USA to supply such parts, other brake brands when asked about origin will just sidestep the question. When we do buy rotors in, they are specified, sampled, tested for element analysis, grain structure, tensile strength, hardness and optimum ductility and tested 100 piece by piece to be perfect for runout on this in house machine.
    3GD Series Sport Slotted Rotor Set; Rear; For FMSI Pad No. D1473; Vented; 5 Bolt Holes; 330mm Dia.; 69mm Height; 20mm Thick; 75mm Center Hole Dia.;

    • Removes Dirt Dust And Debris From Braking Zone
    • Anodized For Protection/Black For Domestics
    • Reduces Brake Fade Under Load And At Speed
    • Great For Truck/SUV/Towing/For Sedan Use
    • Anodized For Protection/Gold For Imports
    • Wide Slots Helps Brakes Run Cooler
    531.48 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: GD1671

    EBC 08-10 BMW 128 3.0 GD Sport Rear Rotors

    No Reviews

    All EBC rotors are made from OE spec grey cast iron, exactly as used on new car production and as many as we have tools for are BRITISH MADE wholly in our own UK foundry. Currently EVERY SINGLE ROTOR sold in Europe and the UK is BRITISH MADE and a majority of the designs specific to the USA are also BRITISH made.The British foundry is constantly expanding its in house tooled range but EBC like every brake manufacturer ….does need occasionally to buy some rotors in from approved sources to complete ranges in overseas markets. None of our competitors will ever tell you where their rotors come from and we at EBC are as disappointed as the rest of the world that cost pressure means there is not ONE foundry left in the USA to supply such parts, other brake brands when asked about origin will just sidestep the question. When we do buy rotors in, they are specified, sampled, tested for element analysis, grain structure, tensile strength, hardness and optimum ductility and tested 100 piece by piece to be perfect for runout on this in house machine.
    3GD Series Sport Slotted Rotor Set; Rear; For FMSI Pad No. D1267; Vented; 5 Bolt Holes; 300mm Dia.; 76mm Height; 20mm Thick; 75mm Center Hole Dia.;

    • Removes Dirt Dust And Debris From Braking Zone
    • Anodized For Protection/Black For Domestics
    • Reduces Brake Fade Under Load And At Speed
    • Great For Truck/SUV/Towing/For Sedan Use
    • Anodized For Protection/Gold For Imports
    • Wide Slots Helps Brakes Run Cooler
    419.79 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: GD1522

    EBC 10-14 BMW X5 4.4 Twin Turbo (50) GD Sport Rear Rotors

    No Reviews

    All EBC rotors are made from OE spec grey cast iron, exactly as used on new car production and as many as we have tools for are BRITISH MADE wholly in our own UK foundry. Currently EVERY SINGLE ROTOR sold in Europe and the UK is BRITISH MADE and a majority of the designs specific to the USA are also BRITISH made.The British foundry is constantly expanding its in house tooled range but EBC like every brake manufacturer ….does need occasionally to buy some rotors in from approved sources to complete ranges in overseas markets. None of our competitors will ever tell you where their rotors come from and we at EBC are as disappointed as the rest of the world that cost pressure means there is not ONE foundry left in the USA to supply such parts, other brake brands when asked about origin will just sidestep the question. When we do buy rotors in, they are specified, sampled, tested for element analysis, grain structure, tensile strength, hardness and optimum ductility and tested 100 piece by piece to be perfect for runout on this in house machine.
    3GD Series Sport Slotted Rotor Set; Rear; For FMSI Pad No. D919; Vented; 5 Bolt Holes; 345mm Dia.; 79mm Height; 24mm Thick; 75mm Center Hole Dia.;

    • Removes Dirt Dust And Debris From Braking Zone
    • Anodized For Protection/Black For Domestics
    • Reduces Brake Fade Under Load And At Speed
    • Great For Truck/SUV/Towing/For Sedan Use
    • Anodized For Protection/Gold For Imports
    • Wide Slots Helps Brakes Run Cooler
    590.66 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 0 Cart Garage
support@ucperformance.com