0
3
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
3 Shopping Cart 1,764.27 $

Motul 1/2L Brake Fluid DOT 5.1

Fully synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516F (272C)
Long life fully synthetic fluid, poliglycol bases; Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3, SAE J 1703, ISO 4925 (Classes 5.1, 4 and 3); Dry Boiling Point: 269C/516F; Wet Boiling Point: 187C/369F
TYPE OF USE: All types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS). PERFORMANCES:: STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3; SAE J 1703; ISO 4925 (5.1, 4 & 3); Long life fluid: The high wet boiling point (187C / 369F), superior to DOT 4 (155C / 311F mini) and DOT 3 (140C / 284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.; Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40C / -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.; RECOMMENDATIONS: Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.; Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).; Store brake fluid in its original container, tightly closed to avoid absorption of moisture.; Aggressive chemical product if contact with hands, paint or varnish.; If skin contact, rinse thoroughly with water.; Drain Interval: 12 to 24 month as per manufacturers recommendations. ;

161.93 $

SKU 100951
brand Motul
Add to wishlist Add to compare

Description

Fully synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point of 516F (272C)
Long life fully synthetic fluid, poliglycol bases; Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3, SAE J 1703, ISO 4925 (Classes 5.1, 4 and 3); Dry Boiling Point: 269C/516F; Wet Boiling Point: 187C/369F
TYPE OF USE: All types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers recommendations. Fluidity specially designed for anti-locking brake systems (ABS). PERFORMANCES:: STANDARDS : FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 and DOT 3; SAE J 1703; ISO 4925 (5.1, 4 & 3); Long life fluid: The high wet boiling point (187C / 369F), superior to DOT 4 (155C / 311F mini) and DOT 3 (140C / 284F mini) conventional fluids enables to use this product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.; Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40C / -40F) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.; RECOMMENDATIONS: Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.; Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).; Store brake fluid in its original container, tightly closed to avoid absorption of moisture.; Aggressive chemical product if contact with hands, paint or varnish.; If skin contact, rinse thoroughly with water.; Drain Interval: 12 to 24 month as per manufacturers recommendations. ;

Specification

Weight 15.7 kg
Dimensions 10.1 × 8.7 × 7.8 cm
air_freight_prohibited

true
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

12
upc

3374650000428
brand

Motul
part_number

100951

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 20152

    LIQUI MOLY 250mL Brake Fluid DOT 4

    No Reviews

    Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.
    Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of DOT 4 specificationis required. The brake fluid is also suitable for use in ABS brake systems.
    Liqui Moly DOT 4 brake fluid can be used with all conventional brake fluid bleeding devices. Liqui Moly DOT 4 brake fluid is miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer. Caution: Brake fluid corrodes the paintwork of cars; in the event of spillage, rinse immediately with plenty of water. Do not use in mineral oil based central hydraulic systems. Observe manufacturers instructions!

    • Assures A High Degree Of Lubricating Action On All Moving Components In The Hydraulic Brake Circuit
    • Miscible And Compatible With High-Quality Synthetic Brake Fluids
    • Outstanding Protection Against The Formation Of Steam Bubbles
    • Excellent Viscosity/Temperature Properties
    • Extremely High Wet And Dry Boiling Points
    • Excellent Low Temperature Behavior
    • Excellent Elastomer Compatibility
    • Highest Thermal Stability
    124.59 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 20154

    LIQUI MOLY 500mL Brake Fluid DOT 4

    No Reviews

    Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.
    Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of DOT 4 specificationis required. The brake fluid is also suitable for use in ABS brake systems.
    Liqui Moly DOT 4 brake fluid can be used with all conventional brake fluid bleeding devices. Liqui Moly DOT 4 brake fluid is miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer. Caution: Brake fluid corrodes the paintwork of cars; in the event of spillage, rinse immediately with plenty of water. Do not use in mineral oil based central hydraulic systems. Observe manufacturers instructions!

    • Assures A High Degree Of Lubricating Action On All Moving Components In The Hydraulic Brake Circuit
    • Miscible And Compatible With High-Quality Synthetic Brake Fluids
    • Outstanding Protection Against The Formation Of Steam Bubbles
    • Excellent Viscosity/Temperature Properties
    • Extremely High Wet And Dry Boiling Points
    • Excellent Low Temperature Behavior
    • Excellent Elastomer Compatibility
    • Highest Thermal Stability
    197.17 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 20158

    LIQUI MOLY 250mL Brake Fluid DOT 5.1

    No Reviews

    Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters which guarantees full function even during extreme conditions. A higher wet and dry boiling point compared to DOT 3 and DOT 4 brake fluids and unique inhibitors provide corrosion and oxidation protection at high temperatures. Special scavengers are used to suppress steam at increased moisture levels.
    Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of DOT 5.1specificationis required. The brake fluid is also suitable for use in ABS brake systems.
    Liqui Moly DOT5.1 brake fluid can be used with all conventional brake fluid bleeding devices. Liqui Moly DOT 4 brake fluid is miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer.

    • Assures A High Degree Of Lubricating Action On All Moving Components In The Hydraulic Brake Circuit
    • Miscible And Compatible With High-Quality Synthetic Brake Fluids
    • Outstanding Protection Against The Formation Of Steam Bubbles
    • Excellent Viscosity/Temperature Properties
    • Extremely High Wet And Dry Boiling Points
    • Excellent Low Temperature Behavior
    • Excellent Elastomer Compatibility
    • High Thermal Stability
    164.30 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 22078

    LIQUI MOLY 1L Brake Fluid DOT 4

    No Reviews

    Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. A high wet and dry boiling point and unique inhibitors provide corrosion and oxidation protection at high temperatures which guarantees full function even during extreme conditions. Special scavengers are used to suppress steam at increased moisture levels.
    Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of DOT 4 specificationis required. The brake fluid is also suitable for use in ABS brake systems.
    Liqui Moly DOT 4 brake fluid can be used with all conventional brake fluid bleeding devices. Liqui Moly DOT 4 brake fluid is miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer. Caution: Brake fluid corrodes the paintwork of cars; in the event of spillage, rinse immediately with plenty of water. Do not use in mineral oil based central hydraulic systems. Observe manufacturers instructions!

    • Assures A High Degree Of Lubricating Action On All Moving Components In The Hydraulic Brake Circuit
    • Miscible And Compatible With High-Quality Synthetic Brake Fluids
    • Outstanding Protection Against The Formation Of Steam Bubbles
    • Excellent Viscosity/Temperature Properties
    • Extremely High Wet And Dry Boiling Points
    • Excellent Low Temperature Behavior
    • Excellent Elastomer Compatibility
    • Highest Thermal Stability
    98.58 $
    Add to cart
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 3 Cart Garage
support@ucperformance.com