COMP Cams Sportsman Valves are available in a variety of diameters, stem sizes and lengths for street and Competition engines. The stainless Steel valves are made from 21-4N forged Steel alloy with 50 HRC minimum hard tips (eliminates lash caps)
(8) Sportsman Titanium 1.615″ Exhaust Valves‚ GM LS7‚ 5.685″ Length‚ 8mm Stem
COMP Cams Sportsman Valves are available in a variety of diameters, stem sizes and lengths for street and Competition engines. The stainless Steel valves are made from 21-4N forged Steel alloy with 50 HRC minimum hard tips (eliminates lash caps)
(8) Sportsman Titanium 1.615″ Exhaust Valves‚ GM LS7‚ 5.685″ Length‚ 8mm Stem
| Weight | 2.24 kg |
|---|---|
| Dimensions | 12 × 6.5 × 2.8 cm |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 036584264132 |
| brand | COMP Cams |
| part_number | 6069-8 |
When Turbosmart began making performance products back in 1997, a great amount of effort was put into the design and manufacturing process to ensure our products created a new standard. More hand-crafted than mass-produced, Turbosmart products quickly gained acceptance within the performance community for their quality and reliability. Coupled with extraordinary service and after-sales support, Turbosmart quickly became one of the most sought-after names in the industry. Not much has changed since then. Although our product line and the company itself have grown considerably, the products are still designed and manufactured in our factory in Sydney, Australia, using the same tried and proven formula of innovative design, strict quality control, and rigorous testing. We have invested in our research facility manufacturing equipment and staff training to ensure our products continue to perform up to and beyond your expectations. At Turbosmart, we do not believe in cutting corners and half-measures. We do not accept anything short of perfection – and neither should you.
Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV.
Behind every Turbosmart product stands a long and rich racing history. While a majority of Turbosmart products are used on street cars, their design and testing procedure is identical to the high-end purpose-made racing products. Before reaching the consumer, Turbosmart products are subjected to a range of tests performed in the most demanding environment, the race track.
Borg Warner EFR Turbo Series; Ford Falcon FG EcoBoost 2.0; Ford F150 3.5 EcoBoost 2011-2012; Ford Focus MK1 RS 2002-2003; Ford Focus MK2 XR5/ST/RS 2.5 5 Cylinder; Ford Focus MK3 1.5 EcoBoost; Ford Focus MK3 1.6 EcoBoost; Ford Focus MK3 ST 2.0 EcoBoost; Opel Corsa D OPC 2006-2014; Porsche 911 GT2 (997); Porsche 911 Turbo (997); Vauxhall Corsa D VXR 2006-2014; Volvo C30 T5; Volvo C70 T5; Volvo S40 T5; Volvo S60 T5; Volvo V50 T5; Volvo V70 T5
Kompact Range by Turbosmart is a high performance upgrade for the factory plastic diverter and bypass valves factory fitted to turbocharged cars, replacing the plastic and rubber system with a Motorsport-Proven billet aluminum valve which uses our boost-balance system for optimum performance and reliability, the life of the vehicle.
Dual Port vents both to the atmosphere & back into the air intake. Ports with sequential timing allow quieter operation during normal driving, while getting all the benefits of a vent-to-atmosphere BOV under race conditions.
Like all valves in the DV+ family, the T9381 offers significant benefits over factory-fitted electronic diverter valves – sharper throttle response, faster boost recovery on gearshift or brief throttle lifts, improved boost holding, and unrivalled longevity.
Where the T9381 differs from the T9351 DV+ is that it includes a low-profile integrated solenoid, rather than disassembling the factory diverter valve and re-using the solenoid.
This means the T9381 can be used to replace the factory diverter valve entirely rather than re-use the solenoid, or its low height allows it to be used on cars where a lack of clearance would prevent the fitment of a T9351 DV+. Perfect examples would include the EA888 gen3 engine found in the 2013.5 VW GLI, any MQB platform with an IS38 turbo and/or an aftermarket intake, or the 4.0 TFSI from 2012-2017.
High Performance Diverter Valve with low-profile integrated solenoid for applications where clearance issues prevent the fitment of a T9351. Offers sharper throttle response, faster boost recovery on gearshift, and improved boost holding
ALL THE PERFORMANCE WITH OR WITHOUT THE NOISE!, GFB’s Mach 2 utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce
GFB’s Mach 2 diverter valve is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound. Atmosphere venting kits also available.
Universal 20mm inlet, 20mm outlet
Reviews
There are no reviews yet.