Lift Kits

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6” replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
6″ RAD ARM SYS W/COILS & STEALTH 2011-13 FORD F450/550 4WD 10 LUG.
F450: TIRE SIZE – 285/75R18 Wheel – 18XOEM W/OEM” BS W/OEM DUALLY Wheels; F550: TIRE SIZE – 285/75R19.5 Wheel – 19.5XOEM W/OEM” BS W/OEM DUALLY Wheels; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Obtain maximum front suspension damping for Super Duty’s with our Dirt Logic 4.0 Stainless Steel Coilover Conversion system. The upper coilover mounts are constructed with 1.75 diameter DOM tubing that replaces the factory coil spring mounts and span across a wide section of the frame for proper impact load distribution. The lower mounts are 1/4” thick steel that attach to the axle housing, providing solid mounting points for the Dirt Logic 4.0 Stainless Steel Coilover piggyback reservoir shocks. Also included in this system are billet sway bar end links with heim ends and quad layer limiting straps. Includes rear 2.25 Dirt Logic Stainless Steel shocks.
6″ RAD ARM SYS W/DLSS 4.0 C/O& RR DLSS 2011-13 FORD F450/550 4WD 10 LUG.
F450: TIRE SIZE – 285/75R18 Wheel – 18XOEM W/OEM” BS W/OEM DUALLY Wheels; F550: TIRE SIZE – 285/75R19.5 Wheel – 19.5XOEM W/OEM” BS W/OEM DUALLY Wheels; 101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Component Box; For 6 in. Lift; For PN[K2156/K2156M/K2158DL/K2156DL];

• The Kits Are Made From The Highest Quality Materials
• Guarantee Superior Performance And Functionality
• Other Parts Required For A Complete Set

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; 4 in. Lift; w/Dirt Logic 4.0 Coilovers; Rear Dirt Logic Shocks;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2 diameter heavy wall links feature race style 1 Uniballs for superior strength. Thick 1/4 steel brackets secure the 4 Links to the frame without cutting or welding. The system also includes Sway Bar Drops, Trac Bar relocation bracket, Pitman Arm, and U-Bolt kit.
4 Link Lift System; For 6 in. Lift; Incl. Front 4.0 Resi Coilovers/Rear 2.25 Shocks;

• Provides Unsurpassed Articulation And Wheel Travel
• Everything You Will Need To Lift Your Vehicle
• Race Style Uniball For Superior Strength
• Ultimate In Suspension Performance
• No Cutting Or Welding
• Heavy Wall Links

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; For 6 in. Lift; Incl. Front 4.0 Resi Coilovers/Rear 2.25 Shocks;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; 8 in. Lift; Incl. Front Dirt Logic 4.0 Resi Coilover and Rear Dirt Logic 2.25 Shocks; For Vehicles w/Factory Overloads;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; w/DLSS Shocks; 8 in. Lift; w/Factory Overload;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; 8 in. Lift; Incl. Front Dirt Logic 4.0 Resi Coilover and Rear Dirt Logic 2.25 Shocks; For Vehicles w/o Factory Overloads;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.
Radius Arm Lift System; w/DLSS Shocks; 8 in. Lift;

• Adjustable Alignment Cam Allows Caster Adjustment
• Unsurpassed Strength And Performance
• Patent Pending Radius Arms
• Fully Tubular Structure
• Dimple Die Side Plates

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Component Box; Box 2 of 3; For 10 in. Lift; For PN[K2148DL/K2150DL/K2152DL/K2154DL];

• The Kits Are Made From The Highest Quality Materials
• Guarantee Superior Performance And Functionality
• Other Parts Required For A Complete Set

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.
Component Box; Box 2 of 2; For 10 in. Lift; For PN[K2149DL/K2153DL/K2146DL/K2151DL];

• The Kits Are Made From The Highest Quality Materials
• Guarantee Superior Performance And Functionality
• Other Parts Required For A Complete Set