Intake Manifolds

Edelbrock part #7123 Performer 5.0 RPM II intake manifold for 1986-95 5.0L Mustang engines has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit #8025. May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended.
Edelbrock Performer 5.0 RPM II Intake Manifold for Ford 5.0 Small-Block V8
Ford:Small-Block Windsor:302 (5.0L)

• Also Available In Polished – See PN[71231]

Edelbrock part #7121-CP Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8’s. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8, Chrome Plasma

Edelbrock Part PN 7521-CP RPM Air-Gap intake manifold is designed for the Small-Block Ford 289-302 CID V8 including 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes and is the perfect manifold for hot rodders, street custom enthusiasts, bracket racers or any builder looking for optimum performance in the 1,500-6,500 RPM range with a serious look of horsepower under the hood. The Air-Gap design features an open air space under the plenum that separates the runners from the hot engine resulting in a cooler, denser charge for more power. The 7521 RPM Air-Gap features larger runners (7% at the plenum entries) than the standard 7121 Performer RPM design that is beneficial to larger CID stroker engines. The PN 7521-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain. The 7521-CP includes nitrous bosses but no provision for exhaust heated chokes and no exhaust crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000. For more info go to www.lokar.com.
Edelbrock Part #7521-CP RPM Air-Gap intake manifold is designed for small-block 302/331/347 Ford V8. Perfect for hot rods, street machines, bracket racers or any builder looking for optimum performance with a beautiful Chrome Plasma finish.

• 7 stage prewash and 4 stage coating for durability and beauty
• Outstanding performance for any 1500-6500 rpm application
• Long runner high-rise design for broad torque curve
• No polishing, just wipe and go!
• Bright Chrome Plasma finish

Edelbrock part #29285 Super Victor 8.2 EFI intake manifold is designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169. The Super Victor 8.2 is for engines with a standard 8.2″ deck height and features a single-plane, high-rise intake design for maximum race-winning power. This intake manifold is ideal for use with large displacement drag racing engines. It delivers big power gains from 4500 to 8500 rpm and includes rear cooling water bosses. The square-bore carburetor pad stands .850″ taller than the Edelbrock Victor Jr. #2921.
Edelbrock Super Victor 8.2 EFI Intake Manifold for Ford 289-347 Small-Block V8
Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L)

• Delivers Big Power Gains

Edelbrock part #29245 Super Victor 351W EFI intake manifold is designed for high rpm or large displacement competition 351 Windsor Ford V8’s with a deck height of 9.5″. It’s ideal for drag racing or oval track engines operating between 4500 and 8500 rpm. This intake manifold can be used with ported factory cast iron heads, however aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. #77169 or Victor heads #77219 for ultra high-horsepower. Runners have a 3.20 square-inch cross sectional area.
Edelbrock Super Victor EFI 351W (9.5″ deck) Intake Manifold for Ford 351-427 Small-Block Windsor V8
Ford:Small-Block Windsor:351 (5.8L)

• Features Precision Machined Injector Bosses

Edelbrock part #2114 Performer Vortec V6 intake manifold is based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine swap market utilizing 1985 and later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with Vortec heads. With this manifold, rodders can take advantage of the higher flow available with the Vortec head design. This Performer Vortec intake manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. Designed for use with Edelbrock Thunder Series AVS or Performer Series 500 cfm carbs, it accepts late model water neck, alternator, HEI and air conditioning.
Performer Vortec Intake Manifold for 90 Deg GM V6, 200-229-262 c.i.d. (3.8L and 4.3L) Engines will allow a Square-Bore 4150-Style Carburetor (#1403 or #1404 500cfm Recommended) to be used with the Vortec V6 Cylinder Heads. Non-EGR
Chevrolet:Small-Block Gen I Vortec 90 Deg V6:200 (3.3L)/229 (3.8L)/262 (4.3L)

• Accepts Late Model Water Neck-Alternators-HEI-A/C

Edelbrock part #70855 Victor EFI Tunnel Ram base is a modern updated design to our very successful Victor Ram 2-R Tunnel Ram, which was first released over 35 years ago. It’s designed for use with 468-582 c.i.d. standard-deck Chevrolet V8 engines with conventional rectangular port cylinder heads. This new and improved design has 7″ long runners with close to 5.5 square-inches at the plenum, making it 25% larger than our current Victor Ram 2-R Tunnel Ram base! This is the ideal intake manifold for any modern high horsepower demanding application. Will fit Edelbrock Victor series race cylinder heads #77409, #77459 and #77609.
Edelbrock Victor Ram 2-R Intake Manifold Base for EFI Applications 468-582 Big-Block Chevy
Chevrolet:Big-Block Race

• Machined Fuel Rail Ends

Edelbrock part #7524 Dual-Quad HEMI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad. Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.
Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI Carbureted Intake Manifold
Chrysler:Gen II HEMI:426 (7.0L)/572 (9.4L)

• Compatible With Factory Cylinder Heads

Edelbrock part #75245 Dual-Quad HEMI EFI intake manifold is intended for use with Mopar Gen II (1964-71) 426-572 HEMI engines operating in the 2,500 to 6,500+ range. This new intake manifold is a single-plane Air-Gap design with a dual square-bore 4150 style throttle body pad. Throttle body spacing and height are the same as Mopar Performance dual-quad #P5153737, making it a direct bolt-on to all vehicles with a shaker hood. The Dual-Quad HEMI is compatible with factory style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads. Requires Edelbrock Coil Bracket #8079 for use with OE style coils.
Edelbrock Dual-Quad Chrysler Gen II 426-572 HEMI EFI Intake Manifold
Chrysler:Gen II HEMI:426 (7.0L)/572 (9.4L)

• Compatible With Factory Cylinder Heads

Edelbrock part #50665 Victor 460 EFI intake manifold is based on our popular Torker II #5066 for 429/460 c.i.d. Ford V8 applications. It has cast and vertically machined fuel injector bosses for proper fuel injector placement. It is also drilled to accept Edelbrock Fuel Rail kit #3645 and support brackets, for easy attachment. Designed to accept standard flange throttle bodies. This manifold not equipped with EGR. Will not fit 1988-later models or 429 Cobra-Jets.
Edelbrock Victor 460 EFI Intake Manifold for Ford 429/460 Big-Block V8
Ford:Big-Block:429 (7.0L )/460 (7.5L)

• Designed To Accept Standard Flange Throttle Bodies