Gear Oils

USA engineered and manufacturered performance transmission oil.

HKS GT S/C TRACTION FLUID I (800ml)

Fully synthetic gear oil, developed specifically to meet a variety of OE manufacturers Dual Clutch Transmission (DCT) specifications. Latest additive technology ensures superior clutch control, best shift performance and outstanding wear protection even with extended oil service intervals.
Specifically developed for use in various dual-clutch transmissions (DCT transmissions) and manual gearboxes. Usage according to the prescribed specifications from the unit or vehicle manufacturer.
The specifications and regulations of the unit or vehicle manufacturers must be observed. The optimal effectiveness is achieved only when used unmixed.

• Excellent Viscosity/Temperature Properties
• Very Good Low-Temperature Properties
• Outstanding Resistance To Oxidation
• Optimum Stability To Aging
• Excellent Wear Resistance
• Excellent Shear Stability

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended for any hi-load transmission or differential in race and track vehicles or whenever added protection is needed.
High-load vehicle hypoid transmissions. Particularly BMW vehicles with and without locked differential axle systems, manual transmissions and ancillary units. The manufacturers operating instructions must be followed.
The operating instructions of the vehicle and transmission manufacturers must be followed. Can be mixed with mineral oil residue, which remains in final drive/ancillary when changing oil.

• Excellent Viscosity/Temperature Properties
• High Pressure-Absorption Capability
• For Extended Oil-Change Intervals
• Outstanding Corrosion Protection
• Excellent Resistance To Aging
• Very Compatible With Seals
• Excellent Wear Resistance
• Reduces Running Noise

Mineral based gear oil provides accurate function and protection at any temperature even during high torque loads. Consistent viscosity and multifunctional EP additives guarantee a strong lubricating film for maximum wear protection.
For highly stressed vehicle transmissions without limited-slip differentials, especially axle drives with hypoid gears. Comply with the vehicle or aggregate manufacturers instructions.
During selection, keep to the viscosity class stipulated by the transmission manufacturer. Miscible with all branded gear oils. Fully effective only when used alone. Only use in manual transmissions for which API GL5 oils have been stipulated.

• Excellent Viscosity/Temperature Properties
• Does Not Attack Common Sealing Materials
• High Pressure-Absorption Capability
• Excellent Resistance To Aging
• Reduces Running Noise
• Minimizes Wear

Fully Synthetic, GL5 high-performance extreme-pressure gear oil. Facilitates smooth and precise shifting even in extreme conditions, provides excellent wear protection properties and ideal viscosity-temperature behavior.
For high-load motorbike transmissions and final drives. The transmission manufacturers instructions must be followed.
As stipulated for gear oil. The transmission manufacturer’s instructions must be followed. Miscible with mineral-base oil residues which can remain during oil changes in transmissions and drives. Can be easily disposed of with standard used oil. Optimum effect only when used alone.

• Guarantees Low Fuel Consumption
• Guarantees Smooth Gearshifting
• Reduces Transmission Noise
• Excellent Wear Protection
• Good Corrosion Protection
• Wide Viscosity Range
• High Efficiency

Fully synthetic automatic transmission fluid with generous performance reserves. Proven additive technology provides high thermal stability, excellent wear protection and correct friction behavior. Excellent low temperature behavior. Compatible with most common seal materials.
Use in automatic or manual transmissions, power steering systems, hydraulic systems or auxiliary drives-automotive or commercial. Always follow manufacturers specifications and recommendations.
The specifications and instructions from thecomponent or vehicle manufacturer must be followed. Top Tec ATF 1100may also be used for refilling systems in which traditional ATFfluids are used. Optimum efficiency, however, is only possible when the product is used on its own (i.e. no mixing).

• Excellent Viscosity/Temperature Properties
• Outstanding Friction Characteristics
• Very Good Low-Temperature Properties
• Excellent Corrosion Protection
• Optimum Stability To Aging
• Highest Thermal Stability
• High Chemical Resistance
• Minimizes Wear

Fully synthetic automatic transmission fluid with modern additive technology provides high thermal stability, excellent wear protection and correct friction behavior. Excellent low temperature behavior. Compatible with most common seal materials.
For automatic transmissions, specific manual gearboxes, power steering systems, hydraulics and auxiliary drives in automotive and commercial vehicles. Always follow manufacturers specifications and recommendations.
The specifications and instructions from the unit or vehicle manufacturer must be followed. Top Tec ATF 1200may be used for refilling systems in which traditional ATF fluids are used. Optimum effectiveness, however, is only possible when the product is used on its own (i.e. no mixing).

• Enables A Multifaceted Range Of Applications
• Excellent Viscosity/Temperature Properties
• Outstanding Friction Characteristics
• Very Good Low-Temperature Properties
• Excellent Corrosion Protection
• Optimum Stability To Aging
• Highest Thermal Stability
• Excellent Wear Protection
• High Chemical Resistance

Low-viscosity high-performance transmission fluid. High shear stability provides low fuel consumption and excellent wear protection. Outstanding resistance to viscosity breakdown provides superior shift performance in all operating conditions. Suitable for a variety of transmissions.
Specially developed for manual transmissions and specific dual-clutch transmissions. Recommended particularly for use innumerous manual transmissions from BMW, Ford, Volkswagen as well as other manufacturers.
Observe manufacturers instructions.Optimum effectiveness only when the product is used unmixed.

• Outstanding Shifting Comfort Under All Operating Conditions
• Excellent Viscosity/Temperature Properties
• Outstanding Resistance To Oxidation
• Outstanding Corrosion Protection
• Guarantees Low Fuel Consumption
• Excellent Synchronous Behavior
• Excellent Shear Stability
• Excellent Wear Resistance