-
5 Gallon Tank that includes Conductive Fluid Level Sensor
V2 Water/Methanol Injection 5 Gallon Tank Kit with Conductive Fluid Level Sensor -
V2 Water/Methanol HD Controller Kit – Internal MAP with 40psi max
V2 Water/Methanol HD Controller Kit – Internal MAP with 40psi max, CONTROLLER ONLY -
V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, CONTROLLER ONLY -
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.
V2 Water/Methanol Standard Controller Kit – Internal MAP with 35psi max, CONTROLLER ONLY -
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. The Multi Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.
V2 Water/Methanol Injection 1.15 Gallon Tank Kit with Conductive Fluid Level Sensor -
Replacement V3 Water/Methanol Injectors (Qty 2), Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
Includes 2 Complete Injector Assemblies and 2 sets of Swirl Generators -
AEM Water / Methanol Injection 6-Amp Recirculation-Style Pump 200psi for One-Gallon Kit **replacemen
If part of your existing AEM Water/Methanol Injection system has become damaged, we offer all of the component parts individually, including our 200 PSI water/methanol injection pump, a WMI check valve kit, water/methanol injection tubing, 1.15- and five-gallon water/methanol fluid tanks and our conductive low fluid level sensor.
Water/Methanol Injection 200psi Recirculation Pump -
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 in NPT Fittings
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 -inch NPT Fittings -
The Nitrous Express direct port nitrous plates are designed to fit factory modern Hemi Engines. This setup is capable of spraying anywhere from 100-400 horsepower. Direct port plates offer an advantage compared to a single nozzle or a throttle body plate, giving you the best distribution possible by feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8″ thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black, and as always proudly made in the USA,, This system includes: Direct port Hemi nitrous plates with stainless fittings, TPS Auto learn switch so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. Jetting for 100-400HP, Stainless braided N2O and fuel line, Master arming switch, Relay and relay harness, Fuel rail adapter, 15Lb bottle with the billet aluminum Lightning 500 bottle valve and stainless bottle brackets, All necessary hardware to complete the installation.
Direct Port Plate System For 5.7,6.1 and 6.4 Hemi W/ 15Lb Bottle.
5.7,6.1 and 6.4 Hemi -
The Nitrous Express direct port nitrous plates are designed to fit factory modern Hemi Engines. This setup is capable of spraying anywhere from 100-400 horsepower. Direct port plates offer an advantage compared to a single nozzle or a throttle body plate, giving you the best distribution possible by feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8″ thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black, and as always proudly made in the USA,, This system includes: Direct port Hemi nitrous plates with stainless fittings, TPS Auto learn switch so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. Jetting for 100-400HP, Stainless braided N2O and fuel line, Master arming switch, Relay and relay harness, Fuel rail adapter, All necessary hardware to complete the installation.
Direct Port Plate System For 5.7,6.1 and 6.4 Hemi W/ No Bottle.
5.7,6.1 and 6.4 Hemi -
The Nitrous Express direct port nitrous plates are designed to fit factory modern Hemi Engines. This setup is capable of spraying anywhere from 100-400 horsepower. Direct port plates offer an advantage compared to a single nozzle or a throttle body plate, giving you the best distribution possible by feeding an equal amount of nitrous and fuel to each cylinder. The plates bolt under the intake manifold making installation quick and simple. The plates come in at 5/8″ thick so there will be no need to run an aftermarket hood. Made entirely of billet aluminum, anodized in black, and as always proudly made in the USA,, This system includes: Direct port Hemi nitrous plates with stainless fittings, TPS Auto learn switch so the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the accelerator. Jetting for 100-400HP, Stainless braided N2O and fuel line, Master arming switch, Relay and relay harness, Fuel rail adapter, 10Lb bottle with the billet aluminum Lightning 500 bottle valve and stainless bottle brackets, All necessary hardware to complete the installation.
Direct Port Plate System For 5.7,6.1 and 6.4 Hemi W/ 10Lb Bottle.
5.7,6.1 and 6.4 Hemi -
For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.
Water-Methanol Direct Port 4 Cyl Upgrade Quick-Connect (Nozzles Not Included) .
Kit Contents: 20′ Red High Temp Nylon Tubing, 4-Port Distribution Block, High Flow Solenoid Upgrade, 4 Nozzle Holders, Required Quick Connect Fittings
For Use With All Water-Methanol Injection Systems Using 1/4″ High Temp Nylon Tubing
Showing 1–12 of 18 results