-
AEM Charge Pipes are a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged BMW models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, AEM offers a wide range of Cold Air Intake System that can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEMa**s Lifetime Limited Warranty.
AEMa**s Charge Pipe Kit is engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. -
The AEM-26-3011C Charge Pipe is a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged Toyota Supra GR models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, please refer to our Cold Air Intake Systems. The charge pipe kit is easy to install with commonly available tools and it is backed by AEMa**s Lifetime Limited Warranty.
AEMa**s Charge Pipe Kit is engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. -
The AEM 26-3003C Intercooler Charge Pipe Kit is a free-flowing, mandrel-bent aluminum tube designed to replace the restrictive factory intercooler piping on specific turbo charged Honda Civic models. The AEM charge pipe has been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the intercooler to the engine. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. This cold-side charge pipe has two provisions for 1/8 inch NPT ports for you to optionally add either a water-methanol injection or a nitrous oxide modification. The AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM’s Lifetime Limited Warranty.
AEM’s Charge Pipe Kit is engineered to give your engine more power and acceleration by replacing the restrictive factory charge pipe. The tube features a fitting that you can customize the diverter/blow-off valve attached to the system. -
AEM Charge Pipes are a free-flowing, mandrel-bent aluminum tube charge pipe kit designed to replace the restrictive factory intercooler piping on specific turbo charged BMW models and offer a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, AEM offers a wide range of Cold Air Intake System that can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEMa**s Lifetime Limited Warranty.
AEMa**s Charge Pipe Kit is engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. -
Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.
BladeRunner 3 IN Aluminum Hot Charge Pipe Black Ford Diesel Trucks 08-10 V8-6.4L (td) -
These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction. This system is precisely designed on CAD software for perfect fitment and to maximize the air flow path to the turbos. The tubes are constructed of high-quality cross-linked polyethylene (XLPE) to resist heat and impact. Stainless steel rings are pressed in the tube ends to protect the tubes from collapsing under pressure and heat. Premium compression molded silicone couplings are designed with integrated external ribs to maintain their shape under vacuum, while the smooth internal surfaces promote high velocity air speed and reduce turbulence. The silicone material offers superior heat resistance and excellent protection against wear and deterioration. Stainless steel Smart Seal clamps are also provided to guaranteed perfect seal year after year. aFe POWER engineers spent countless hours and created multiple 3D printed prototypes to guarantee perfect fitment while producing maximum power. Each iteration has been tested on our in-house dyno alongside extensive road testing both on the street and off-road, to make certain these turbo inlet tubes will perform in any situation. This kit comes with all necessary fittings pre-installed on the tubes for a fast and easy installation. All factory connections are maintained to ensure your truck runs perfectly. This installation will take around 2 hours for an experienced technician, as the turbos are not easily accessible.
Turbo Inlet Pipes Ford F-150 Raptor 15-16 V6-3.5L (tt) -
This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side charge pipe. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This turbo muffler delete kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and a heavy-duty, 5-ply, polyester reinforced silicone coupling for superior strength and durability. Finished with Red Anodizing and a unique laser-etched aFe Power logo for a custom look. Designed to work with aFe charge pipes (46-20414-B ) only. Will not work with the OE charge pipes.
BladeRunner Turbo Muffler Delete for aFe Charge Pipe Red Volkswagen GTI (MKVII) 15-21 L4-2.0L (t) -
Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner I/C tube kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This oversized 2-1/4in OD Turbo Muffler Delete replaces the factory turbo muffler located between the turbo compressor outlet and the hot side intercooler tube. The straight through oversized design tremendously increases flow and turbocharger sound by creating a smooth transition between the turbo and intercooler tube. CNC machined from 6061-T6 aluminum then finished in red anodizing also provides superior strength and long lasting durability. This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Wrinkle Black powder coating with a unique laser-etched aFe power logo for a custom look.
BladeRunner Aluminum Hot and Cold Charge Pipe Kit Black w/ Turbo Muffler Delete Volkswagen GTI (MKVII) 15-21 L4-2.0L (t) -
This turbo inlet is the perfect addition to your aFe air intake system. It removes restriction of the factory turbo inlet and guarantees increased air flow for maximum power. It provides a smooth transition for the air from the aFe air intake tube to the turbo with minimum restriction. The cast aluminum design has CNC machined ends for a perfect fit and finish. The part is anodized black for durability and a stealthy appearance. This turbo inlet utilizes a flexible silicone coupling that is reinforced with two layers of polyester material, making it resistant to wear and deterioration. The silicone coupling mates directly to the aluminum turbo adapter and the aFe air intake tube. All necessary clamps are provided. This turbo inlet utilizes the factory O-Ring and screw and comes with the necessary clamps and coupler to fit perfectly with your aFe air intake system.
Turbo Inlet Pipes Fits aFe POWER Intakes PN: 54-13050, 50-70036, 51-76403 & 54-76403 -
BladeRunner GT Series intercooler end tanks are constructed out of heavy-duty 3/16″ TIG-welded aluminum plates. This BladeRunner GT Series Intercooler features a 3″ bar and plate core that is extremely durable and allows for greater airflow over stock. This BladeRunner Intercooler and tube kit features billet aluminium inlet and outlets with a quick-connect adapter and an o-ring seal to ensure a leak-free fit while maintaining superior strength and durability. 100% TIG-welded for race proven strength and durability. TIG-welding provides the strongest welds, reducing stress cracks. The included tubes are powder coated wrinkle black and are constructed of mandrel-bent aluminum for maximum airflow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing performance. Also featured are heavy-duty 5-ply silicone couplings and stainless-steel spring-loaded T-bolt clamps. This BladeRunner intercooler kit uses factory mounting locations for stability and easy installation. BladeRunner intercoolers are brush finished and along with charge pipes feature laser engraved aFe POWER logos.
BladeRunner GT Series Intercooler Kit w/ Tubes Black RAM 1500 16-19 V6-3.0L (td) -
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapter with an o-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.
BladeRunner 3 IN Aluminum Hot and Cold Charge Pipe Kit Black RAM 1500 EcoDiesel 16-19 V6-3.0L (td) -
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.
BladeRunner 3 IN Aluminum Hot Charge Pipe Black RAM 1500 EcoDiesel 16-19 V6-3.0L (td)
Showing 1–12 of 654 results