0
2
Email Us :
support@ucperformance.com
Select a vehicle to find exact fit parts
Back to vehicles list
0
Hello, Log In My Account
2 Shopping Cart 320.46 $

Whiteline 05-22 Toyota Tacoma Control Arms – Front Upper

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Upper Control Arms designed to add 2.5 to 3.5 degrees of additional positive caster and up to 1.5 degrees of extra negative camber at 2 inches of suspension lift – enhancing alignment geometry, handling stability, and tire clearance.

  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

548.88 $

SKU KTA247
brand Whiteline
Add to wishlist Add to compare

Description

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Upper Control Arms designed to add 2.5 to 3.5 degrees of additional positive caster and up to 1.5 degrees of extra negative camber at 2 inches of suspension lift – enhancing alignment geometry, handling stability, and tire clearance.

  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

Specification

Weight 21 kg
Dimensions 16.1 × 13.2 × 7.5 cm
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
units_per_sku

1
upc

9319924466160
brand

Whiteline
part_number

KTA247

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *

Related products

  • Add to wishlist Add to compare
    SKU: 81398

    SPC Performance Audi Q5 Upper Racing Control Arm Kit

    No Reviews

    Get ready for the track with this four (4) arm set of adjustable upper links for the Audi C8 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis seales flex joints replace the compliant inner bushings with a free pivoting, minimum compliance, joint. You will fee the difference in handling. Forged 6061-T6 Aluminum contruction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included xAxis sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint Don’t need the added benefits of our performance arms? Use SPC arms with OE type bushings – part #81393 for two sets of arms to correct both sides of the vehicle, #81391 for the left side, or part #81392 for the right. Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. Warning: You will also hear the difference, the OE bushings are designed to absorb and negate noise, vibration, and harshness (NVH). This set of arms will transmit road noise into the cabin. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • xAxis racing style sealed flex joints for reactive handling
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    1,095.95 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81373

    SPC Performance Audi and VW Adjustable Control Arm Kit

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, & harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes four arms to replace both upper links on both sides of the vehicle. For the left hand (LH) side, use #81371. For the right hand (RH) side, use part number #81372. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joint boots on these arms? We have replacement kits available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • Kit includes both arms for both sides of the vehicle, order one kit per vehicle
    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Comes with pinch bolt hardware
    899.93 $
    Read more
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 72610

    SPC Performance 99-11 Porsche 996/997 06-16 Cayman Front or Rear Adjustable Control Arm (Pair of 2)

    No Reviews

    Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to 2 camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car adjustability as well as get you track ready, while maintaining OE Noise Vibration and Harshness (NVH) levels with booted ball joints and high durometer bonded rubber bushings. SPC offers the only greaseable and rebuildable ball joint on the market. If you wear out your ball joint race with heavy track use, (it happens) you can get a rebuild kit and avoid the cost of a whole new arm. These arms come with preset turning torque, if you want a looser or tighter ball joint simply change preload by turning the retainer. This set can be used for front or rear, so if you want adjustability on all four corners get two sets. Note: Rear suspension fitment excludes vehicles with Xenon headlamp option. Note: modules equipped with hydraulic bushings must be pressed out and reused from the original control arms.
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    949.96 $
    Add to cart
    Add to wishlist Add to compare
  • Add to wishlist Add to compare
    SKU: 81371

    SPC Performance Audi and VW Rear Adjustable Control Arm – Left

    No Reviews

    Adjust front camber and caster +-1.5deg on the Audi C6 and D3 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration, and harshness (NVH) parameters. Audi’s unique multi-link suspension creates a ‘Virtual’ SAI. The factory does not publish a specification for caster, but SPC recommends 5deg to 6deg of caster as a preferred angle for tracking and return to center on these cars. This kit includes two arms to replace the two front upper arms on the left hand (LH) side. For the right hand (RH) side, use part number #81372. Want to be able to adjust both sides? Use part number #81373. SPC Arms Feature: Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight OE style, maintenance free, booted ball joints Large 18mm threaded adjuster links Replacement pinch bolts included Need to replace the ball joints boots on these arms? We have replacement kit available! Part No. 81354. California Residents WARNING
    Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

    • OE style bushing and ball joint maintain factory feel and noise reduction
    • Forged 6051-T6 aluminum for strength and weight reduction
    • Adjusts camber and caster plus or minus 1.5 degrees
    • Kit includes both arms for the LEFT side only
    • Comes with pinch bolt hardware
    449.96 $
    Read more
    Add to wishlist Add to compare
Menu
Currency
0 Wishlist Account 2 Cart Garage
support@ucperformance.com