-
110% Increased Holding CapacityThe FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel (267mm) -
110% Increase in Holding Capacity – STREET/RACEThe FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel (267mm) -
70% Increased Holding CapacityThe FX200 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed Kevlar friction material disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque holding capacity to the FX100, however, it’s life expectancy is increased 2-3 times with the Kevlar disc. This clutch is a great option if you drive your car aggressively but only have simple bolt-ons. Our Kevlar friction material is non-abrasive and doesn’t score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
110% Increased Holding CapacityThe FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
Conversion kit, Must use Clutch Masters specific flywheel
- Must use Clutch Masters specific flywheel
- Conversion kit
-
110% Increase in Holding Capacity – STREET/RACEThe FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
170% Increase in Holding Capacity – RACE/STREETThe FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 or 8 ceramic puck configuration. The 6-puck being the more aggressive setup and 8-puck being the less aggressive. The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and rapid engagement and maintains minimal chatter due to the marcel cushion between the disc linings. This disc is designed for street driven vehicles.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
200-400% Increased Holding Capacity – RACE ONLYThe versatile FX500 System uses our Power Plus II Pressure Plate along with a solid (rigid, unsprung) center 6 or 8 Puck Ceramic Button disc or a Sintered Iron Disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
170% Increase in Holding Capacity – RACE/STREETThe FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 or 8 ceramic puck configuration. The 6-puck being the more aggressive setup and 8-puck being the less aggressive. The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and rapid engagement and maintains minimal chatter due to the marcel cushion between the disc linings. This disc is designed for street driven vehicles.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
110% Increased Holding CapacityThe FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
170% Increase in Holding Capacity – RACE/STREETThe FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 or 8 ceramic puck configuration. The 6-puck being the more aggressive setup and 8-puck being the less aggressive. The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and rapid engagement and maintains minimal chatter due to the marcel cushion between the disc linings. This disc is designed for street driven vehicles.
Conversion kit, Must use Clutch Masters specific flywheel- Must use Clutch Masters specific flywheel
- Conversion kit
-
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc
Showing 8689–8700 of 36491 results