-
70% Increased Holding CapacityThe FX100 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed organic friction material disc. This clutch is engineered for street driven vehicles and is specifically designed for extended wear and additional clamping force for the enthusiast who has added minor bolt-ons such as an exhaust and or intake system, up to 50hp NO2, or other non-forced induction external bolt ons. It features only slightly increased pedal pressure over factory, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation.
- Steel Backed Organic Friction Material
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Marcel Spring Wafer
- Instruction Card
- Heavy-Duty Disc
- Alignment Tool
-
70% Increased Holding CapacityThe FX200 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed Kevlar friction material disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque holding capacity to the FX100, however, it’s life expectancy is increased 2-3 times with the Kevlar disc. This clutch is a great option if you drive your car aggressively but only have simple bolt-ons. Our Kevlar friction material is non-abrasive and doesn’t score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer.
- Heavy-Duty Sprung Hub (or Ridged hub when applicable)
- Steel Backed Kevlar Friction Material
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Marcel Spring Wafer
- Instruction Card
- Heavy-Duty Disc
- Alignment Tool
-
110% Increased Holding CapacityThe FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series.
- Heavy-Duty Hybrid Disc with Fiber Tough Material on Pressure Plate side and Steel Backed Organic Friction Material on the Flywheel Side
- Fiber Tough and Steel Backed Organic Friction Material
- Heavy-Duty Sprung Hub (when applicable)
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Marcel Spring Wafer
- Instruction Card
- Alignment Tool
-
- Steel Backed Segmented Kevlar Friction Material
- Heavy-Duty Sprung Hub (when applicable)
- Heavy-Duty Segmented Kevlar Disc
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Marcel Spring Wafer
- Instruction Card
- Alignment Tool
-
110% Increase in Holding Capacity – STREET/RACEThe FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs.
- Steel Backed Segmented Fiber-Tough Friction Material
- Heavy-Duty Sprung Hub (when applicable)
- Heavy-Duty Segmented Fiber-Tough Disc
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Marcel Spring Wafer
- Instruction Card
- Alignment Tool
-
Every Clutch Masters flywheel is proudly designed and manufactured in the USA. Flywheels are first designed in CAD and are then precision CNC machined in house in one of or Haas CNC lathes out of 6061 aluminum or 1045 steel billet cores. After machining, the flywheel is zero balanced to ensure it is evenly weighted on all sides and spins 100% true. Each aluminum flywheel is Type 3 Hard Anodized for the ultimate in durability and protection of the aluminum. All steel flywheels are black oxide coated to add a layer of rust prevention and gives our steel flywheels a unique black finish. The flywheel is then assembled by a Clutch Master Craftsman, double checked for imperfections and tolerances, and is then ready to be paired with one of our FX100-FX500 single disc clutch kits or twin disc options. All flywheels are SFI 1.2 Certified for use in motorsports.
Will work with OEM 240mm clutch kit or aftermarket clutch built to OEM specifications- Reduces turbo “lag” in turbocharged vehicles
- Improved performance for quicker revs
- CNC machined and precision balanced
- SFI Certified
-
Upgraded 240mm change over kit. Upgraded Aluminum flywheel included. Will not work with OEM or different brand flywheel. Included: HD pressure plate, sprung clutch disc, tool, and aluminum flywheel._x000D__x000D_
110% Increase in Holding Capacity – STREET/RACE_x000D__x000D_
The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs.
Heavy-Duty Segmented Fiber-Tough Disc
Steel Backed Segmented Fiber-Tough Friction Material
Heavy-Duty Sprung Hub (when applicable)
Marcel Spring Wafer
OEM or better Release Bearing
Pilot Bearing (when applicable)
Alignment Tool
Instruction Card
Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.
Upgraded 240mm change over kit. Upgraded Aluminum flywheel included. Will not work with OEM or different brand flywheel. -
110% Increase in Holding Capacity – STREET/RACE
The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs.
Heavy-Duty Segmented Fiber-Tough Disc
Steel Backed Segmented Fiber-Tough Friction Material
Heavy-Duty Sprung Hub (when applicable)
Marcel Spring Wafer
SLAVE CYLINDER NOT INCLUDED
Alignment Tool
Instruction Card
Decals
Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.
Conversion kit, Must use Clutch Masters specific flywheel -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel -
Every Clutch Masters flywheel is proudly designed and manufactured in the USA. Flywheels are first designed in CAD and are then precision CNC machined in house in one of or Haas CNC lathes out of 6061 aluminum or 1045 steel billet cores. After machining, the flywheel is zero balanced to ensure it is evenly weighted on all sides and spins 100% true. Each aluminum flywheel is Type 3 Hard Anodized for the ultimate in durability and protection of the aluminum. All steel flywheels are black oxide coated to add a layer of rust prevention and gives our steel flywheels a unique black finish. The flywheel is then assembled by a Clutch Master Craftsman, double checked for imperfections and tolerances, and is then ready to be paired with one of our FX100-FX500 single disc clutch kits or twin disc options. All flywheels are SFI 1.2 Certified for use in motorsports.
Will not work with OEM clutch kit, flywheel built to work exclusively with FX725 clutch kit.- Replaceable steel insert friction surface, eliminating need of resurfacing the flywheel
- Reduces turbo “lag” in turbocharged vehicles
- Improved performance for quicker revs
- CNC machined and precision balanced
- SFI Certified
-
Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel
Showing 8689–8700 of 37961 results