-
170% Increase in Holding Capacity – RACE/STREETThe FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 or 8 ceramic puck configuration. The 6-puck being the more aggressive setup and 8-puck being the less aggressive. The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and rapid engagement and maintains minimal chatter due to the marcel cushion between the disc linings. This disc is designed for street driven vehicles.
Dampened disc designed to be used with aftermarket single mass flywheel -
Clutch Masters 10-14 Volkswagen GTI 2.0T MK6 6-Speed FX400 8-Puck Clutch w/Steel FW – 500ft/lbs Torq
170% Increase in Holding Capacity – RACE/STREETThe FX400 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate with a custom and extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 or 8 ceramic puck configuration. The 6-puck being the more aggressive setup and 8-puck being the less aggressive. The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The FX400/HDCL (8-puck) ceramic full face disc design creates a quick and rapid engagement and maintains minimal chatter due to the marcel cushion between the disc linings. This disc is designed for street driven vehicles.- Heavy-Duty 4 or 6 puck or Segmented 8 Puck Ceramic Button Disc
- Heavy-Duty Sprung Hub (when applicable)
- Premium Ceramic Friction Material
- Pilot Bearing (when applicable)
- OEM or better Release Bearing
- Instruction Card
- Alignment Tool
- No Marcel
-
200-400% Increased Holding Capacity – RACE ONLYThe versatile FX500 System uses our Power Plus II Pressure Plate along with a solid (rigid, unsprung) center 6 or 8 Puck Ceramic Button disc or a Sintered Iron Disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation.
Rigid disc designed to be used with OEM flywheel -
200-400% Increased Holding Capacity – RACE ONLYThe versatile FX500 System uses our Power Plus II Pressure Plate along with a solid (rigid, unsprung) center 6 or 8 Puck Ceramic Button disc or a Sintered Iron Disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation.
Rigid disc designed to be used with OEM flywheel -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc -
“Race” (TD7R)2 ceramic rigid discs The Clutch Masters FX725 is a 7.25″ (184mm) Twin Disc clutch and is the ultimate in twin disk performance for engines/transmissions with smaller bell-housings that are focused on drag racing. Clutch Masters FX725 Twin Disc systems are developed from decades of experience in drag racing. Because of the minimal rotational mass the FX725 isn’t ideal for the street but with improvements in friction material over the years we have been able to create a solution that can handle occasional street driving. The FX725 is designed to hold tremendous horsepower and torque, while maintaining reasonable peddle pressure to operate on the track. The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover.
“Street and Race” (TD7S)1 ceramic rigid disc, and 1 fiber tuff rigid disc -
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc -
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc -
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc -
The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the trongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003” of flex where as a cast or stamped unit can see as much as .030” of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn’t wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.
DLX Street (TD8DLXS) 1 sprung ceramic disc, directly connected to 1 fiber tuff rigid disc
“Street and Race” (TD8S)1 sprung ceramic disc, and 1 fiber tuff rigid disc
Showing 8233–8244 of 36407 results