Shop

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 6.7 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 6.7 Cummins owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 6.7L Dodge Cummins that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Red High Temp Nylon Tubing, Quick-Connect Fittings) – No Tank

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 6.7L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 6.7L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Red High Temp Nylon Tubing, Quick-Connect Fittings) – No Tank

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 6.7 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 6.7 Cummins owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 6.7L Dodge Cummins that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings) – No Tank

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running Dodge 6.7 Cummins! The Snow Performance Diesel Stage 2 Boost Cooler is available for all 6.7 Cummins owners looking to have the benefit of water-methanol injection through out the 6.7Ls boost range. The Stage 2 utilizes a progressive VC-50 controller (52mm gauge) that commands two water-methanol nozzles that proportionally inject more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. 7 Gal Tank included for trip ready installation. Recommended for all daily driven 6.7L Dodge Cummins that see light towing.
Diesel Stage 2 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive VC-50 Controller/Harness, (2) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

• Adjustable Progressive Boost Activated Water-Meth Engagement
• 300 PSI UHO Pump/SP Hypersonic Nozzles
• High Flow Solenoid Upgrade
• 100% Methanol Resistant
• Dual Water-Meth Nozzles
• High Flow Check Valve
• Large 7 Gal Capacity
• Made In U.S.A.

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 6.7L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 6.7L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings) – No Tank

Snow Performance has combined performance, quality, and ease of installation in this new water-methanol injection kit designed for all Dodge 6.7L Cummins owners who demand colder EGTs while towing heavy loads. The Diesel Stage 3 Boost Cooler utilizes a 2D mapped controller that commands injection based on boost pressure and EGTs (exhaust gas temperatures) to maintain extremely cold air inlet temperatures, 100-300 EGT decreases, decreased emissions, cleaner engine components, and increased fuel economy all while giving 65+ HP to help pull large hills with easy effort while towing. A must have for the diesel enthusiast that is concerned about the longevity of his truck that sees heavy towing. None invasive, the Diesel Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no drilling/marring of the interior needs to take place or additional gauge pods need to be purchased. Functions as a boost gauge, water-meth controller and EGT monitor all in one! Concerned about warranty? The Snow Performance Stage 3 does not leave a signature on the vehicle leaving your diesel truck with its warranty intact. 7 Gal Tank included for trip ready installation. Recommended for all daily driven Dodge 6.7L Cummins that see heavy towing where EGTs become dangerously high. Need a CARB E.O.# for your state? No problem! See part# SNO-50100 for 50-State legal system (C.A.R.B E.0.# D-723)
Diesel Stage 3 Boost Cooler(tm) Water-Methanol Injection Kit Dodge 6.7L Cummins (Stainless Steel Braided Line, 4AN Fittings)
Kit Contents: 300 PSI Extreme Environment (Sealed) UHO Pump, 7 Gal Tank Upgrade, Adjustable Progressive Stage 3 Controller/Harness, (3) 1′, (1) 2′, (1) 20′ Stainless Steel Braided Line, EGT Probe Assembly, Boost Line/Required Hardware, Required 4AN Fittings, SP Decal, Dual Nozzle Upgrade, (2) High Flow Solenoid Upgrade, Snow Performance Hypersonic-Water-Meth Nozzles/High Flow Check Valve

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) Dodge Challengers/Chargers with the 5.7 / 6.1 / 6.4 engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.
Stage 2 Boost Cooler(tm) 2008+ Dodge Challenger/Charger RT 5.7 / 6.1 / 6.4 Forced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank

Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for your 2008+ Mitsubishi Evo X equipped with the 2.0L engine. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all 2008-2015 Mitsubishi Evo X 2.0L.
Stage 2 Boost Cooler(tm) 2008-2015 Mitsubishi EVO X 2.0L Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings) – No Tank