Shop

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 457015. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1997-2001 Toyota Camry 2.2L & 1999-2001 Toyota Solara 2.2L. MagnaFlow 457015 includes (2) Flat Ring Gaskets and interchanges with OE parts 17410-03130, 17410-03140, 17410-03270, 17410-03300, 17410-7A430, 17410-7A520, 17410-7A880, 17410-7B030. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452016. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2001 Toyota Camry and 1999-2001 Toyota Solara, this direct-fit catalytic converter also interchanges with OE parts 25051-03030 and 25051-03040, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Manifold Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52086. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2001 Toyota Camry, 1997-1999 Toyota Avalon, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-20040 and 17410-20160, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51396. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2000-2005 Chevrolet Impala, 1997-2004 Buick Regal, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23405. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2000-2005 Chevrolet Impala, 1997-2004 Buick Regal, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51994. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2001 Toyota Camry, 1997-1999 Toyota Avalon, and more, this direct-fit catalytic converter also interchanges with OE parts 17410-0A060 and 17410-0A080, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51994. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2001 Toyota Camry and 1999-2002 Toyota Solara, this direct-fit catalytic converter also interchanges with OE parts 17410-0A060 and 17410-0A080, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51996. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1997-2003 Chevrolet Malibu, 1999-2005 Pontiac Grand Am, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51397. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1997-1999 Chevrolet Corvette. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
MagnaFlow OEM Grade Semi-Direct Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51452. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2000-2003 Audi A8 Quattro 4.2L. MagnaFlow 51452 interchanges with OE parts 4D0 131 090 HX, 4D0 131 090 QX, 4D0 253 058 RX, 4D0 254 400 AX, 4D0 254 400 BX. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93134. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-1998 Toyota RAV4 and interchanges with OE part 17460-74090. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24022. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1997-1998 BMW 528i and interchanges with OE part 18 30 1 745 555. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24022. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1997-1998 BMW 528i and interchanges with OE part 18 30 1 745 555. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23306. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1996-1998 BMW 740iL, 1997-1998 BMW 540i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 505 321 and 18 30 1 437 353, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23306. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1996-1998 BMW 740iL, 1997-1998 BMW 540i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 30 7 505 321 and 18 30 1 437 353, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds