Shop

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93607 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1998-2000 Chevrolet K3500, 1998-2000 Chevrolet C3500, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447189. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 447189 includes (1) Flange Gasket and interchanges with OE parts ZZP2-40-050, ZZP3-40-050, ZZR2-40-050, ZZR3-40-050. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Precision Stamped Collector Design For Optimal Exhaust Flow; Engine Efficiency And Fuel Economy
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49367. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1998-2000 Kia Sportage and interchanges with OE parts 0K08B-20500 and 0K08A-20500A. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23702 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1998-2000 Ford Contour, 1998-2000 Mercury Mystique, and more, this direct-fit catalytic converter also interchanges with OE part F8RZ-5E212-BH. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447215. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 447215 includes (1) Donut Gasket, (1) Flange Gasket, (3) Nuts, (3) Bolts and interchanges with OE parts 1F02-20-500, 1F03-20-500, 1F22-20-500, ZZN1-20-500, ZZN4-20-500, ZZP2-20-500, ZZP3-20-500, ZZP4-20-500, ZZP5-20-500, ZZR2-20-500, ZZR3-20-500, ZZR4-20-500, ZZR5-20-500, ZZR6-20-500. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Precision Stamped Collector Design For Optimal Exhaust Flow; Engine Efficiency And Fuel Economy
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23751. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1998-2000 Toyota Sienna 3.0L. MagnaFlow 23751 includes (1) Torca Clamp, (3) Crush Ring Gaskets and interchanges with OE parts 17410-0A120, 17410-0A201, 17410-0A202, 17410-0A203. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23629. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1998-2000 Toyota RAV4 and interchanges with OE parts 17460-74150 and 17460-74160. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23629. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1998-2000 Toyota RAV4 and interchanges with OE parts 17460-74150 and 17460-74160. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49360. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-2001 Nissan Altima and interchanges with OE parts 208A0-0Z825 and 208A0-9E100, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 441043. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2001 Chevrolet Metro and 1999-2001 Suzuki Swift, this direct-fit catalytic converter also interchanges with OE part 14250-51G00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24990. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1998-2001 Chevrolet Metro, 1997 Geo Metro, and more, this direct-fit catalytic converter also interchanges with OE part 14250-51G00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51814. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1997-2001 Chevrolet Lumina, 1997-1999 Chevrolet Monte Carlo, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds