-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 4451354. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Universal Catalytic Converter-2.00in.
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
- Durable 308 Stainless Steel MIG Welds
-
The MagnaFlow 1999-2003 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.4L 1999-2003 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15714 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15714 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Cat-Back System
The MagnaFlow 1999-2003 Ford F-150 Street Series Cat-Back Performance Exhaust System 15714 brings out the personality of your 5.4L 1999-2003 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15714 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15714 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC precision robotic manufacturing techniques
- Dyno-Proven Performance
-
The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 16394 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16394 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16394’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
-
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Semi-Direct-Fit Catalytic Converter 23771. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23771 includes (4) Flat Washers, (2) Nuts, (1) Flat Ring Gasket, (2) Bolts and interchanges with OE parts BP4Y-20-55XC, BP4Y-20-55XF, BP4Y-20-55XG, BP4Y-20-55XH, BP4Z-20-55XC, BP4Z-20-55XF, BP4Z-20-55XG, BP4Z-20-55XH, BP6F-20-55XA, BP6F-20-55XB, BP6F-20-55XC, BP7F-20-55X. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
MagnaFlow HM Grade Semi-Direct Fit Catalytic Converter
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23771 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1999-2005 Mazda Miata and interchanges with OE parts BP4Y-20-55XH and BP4Z-20-55XH, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
The MagnaFlow 2015-2023 Ford Mustang Competition Series Axle-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 2.3L, 3.7L 2015-2023 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 19179 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19179’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Axle-Back System
The MagnaFlow 2015-2023 Ford Mustang Competition Series Axle-Back Performance Exhaust System 19179 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 2.3L, 3.7L 2015-2023 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 19179 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19179’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive Exterior Sound
-
MagnaFlow Axle Back, SS, 3in, Competition, Dual Split Polished 4.5in Tip 2015 Ford Mustang GT V8 5.0
The MagnaFlow 2015-2017 Ford Mustang Competition Series Axle-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 19103 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19103’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Axle-Back System
The MagnaFlow 2015-2017 Ford Mustang Competition Series Axle-Back Performance Exhaust System 19103 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 19103 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19103’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
-
The MagnaFlow 2015-2023 Dodge Charger Race Series Axle-Back Performance Exhaust System 19235 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L, 6.4L 2015-2023 Dodge Charger take on any pretenders, whether on the track or the street. Exhaust kit 19235 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Charger exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19235’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19235 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High performance lightweight design
- Straight Pipe-Like Sound
-
The MagnaFlow 2010-2015 Chevrolet Camaro Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 3.6L 2010-2015 Chevrolet Camaro with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Camaro exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Camaro’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15354 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Magnaflow Street Series Stainless Axle-Back System
The MagnaFlow 2010-2015 Chevrolet Camaro Street Series Axle-Back Performance Exhaust System 15354 brings enhanced engine sound and dyno-proven performance to your 3.6L 2010-2015 Chevrolet Camaro with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Camaro exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Camaro’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15354 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
-
The MagnaFlow 2015-2023 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19218 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 3.6L 2015-2023 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19218 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19218’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19218 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High performance lightweight design
- Straight Pipe-Like Sound
-
The MagnaFlow 2015-2016 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19210 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.7L 2015-2016 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19210 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19210’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19210 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High Performance Lightweight Design
- Straight Pipe-Like Sound
-
The MagnaFlow 2015-2023 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19206 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19206 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19206’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19206 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High Performance Lightweight Design
- Straight pipe-like sound
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0512’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2000-2004 Chevrolet S10 4.3L & 2000-2004 GMC Sonoma 4.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 includes (1) 2.5in. U-Bolt Clamp, (1) 2-Bolt Gasket, (2) Nuts, (2) Bolts, (2) 2.25in. U-Bolt Clamps and interchanges with OE parts 15105764, 15105768, 15156939, 15156940, 15758517, 15761479. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
Showing 52177–52188 of 83373 results