-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0970 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0970’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2015-2020 Honda Fit 1.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0970 includes (1) Donut Gasket, (1) Flange Ring, (3) Bolts, (3) Nuts, (1) 2in. U-Bolt Clamp, (1) 3-Bolt Gasket, (1) Spring Bolt Kit and interchanges with OE parts 181765K0003, 18220T5RA52, 18229SNEA01, 18307T5R305, 18393SH3S00. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0970 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4451402. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2003 Honda Odyssey 3.5L. MagnaFlow 4451402 includes (1) Flange Gasket, (1) Crush Ring Gasket, (1) O2 Port Plug and interchanges with OE parts 18160-P8A-A00, 18160-P8A-L00, 18160-P8C-305, 18160-P8C-A00, 18160-P8C-L00, 18160-P8E-L01, 18160-P8F-305, 18160-P8F-A00, 18160-P8F-J00. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4451402. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1999-2003 Honda Odyssey and interchanges with OE parts 18160-P8A-A00 and 18160-P8C-305, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Durable 308 stainless steel MIG welds
-
Whether you’re a pro like Chip Foose or a DIY builder, the MagnaFlow Custom Builder/Hot Rod Kit gives you the essentials to build your ideal exhaust system. Includes pipes, bends, and hangers—choose your own muffler and tip. Available in multiple sizes and backed by a Lifetime Warranty.
Magnaflow Custom Builder Kit
Need further assistance? Call 1-800-990-0905.- Layout/Placement/Orientation And Exhaust Note Are Yours To Craft As You See Fit
- Features All Components Necessary To Enable Flexible Installation Options
- Attention grabbing design thanks to an aggressive style
-
Whether you’re a pro like Chip Foose or a DIY builder, the MagnaFlow Custom Builder/Hot Rod Kit gives you the essentials to build your ideal exhaust system. Includes pipes, bends, and hangers—choose your own muffler and tip. Available in multiple sizes and backed by a Lifetime Warranty.
Magnaflow Custom Builder Kit
Need further assistance? Call 1-800-990-0905.- Layout/Placement/Orientation And Exhaust Note Are Yours To Craft As You See Fit
- Features all components necessary to enable flexible installation options
- Attention Grabbing Design Thanks To An Aggressive Style
-
Whether you’re a pro like Chip Foose or a DIY builder, the MagnaFlow Custom Builder/Hot Rod Kit gives you the essentials to build your ideal exhaust system. Includes pipes, bends, and hangers—choose your own muffler and tip. Available in multiple sizes and backed by a Lifetime Warranty.
Magnaflow Custom Builder Kit
Need further assistance? Call 1-800-990-0905.- Layout, placement, orientation and exhaust note are yours to craft as you see fit
- Layout/Placement/Orientation And Exhaust Note Are Yours To Craft As You See Fit
- Features All Components Necessary To Enable Flexible Installation Options
- Attention Grabbing Design Thanks To An Aggressive Style
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 22-139. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 22-139 includes (1) Nut, (1) Torca Clamp and interchanges with OE parts 6803 8393AB, 6803 8393AC, 6803 8393AD, 6803 8393AE, 6803 8393AF, 6803 8393AG, 6803 8393AH, 6803 8393AI, 6803 8393AJ, 6827 6677AA, 6827 6677AB. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Manifold Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-139. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2020 Dodge Charger, 2011-2020 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 6803 8393AJ and 6827 6677AB, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Durable 308 stainless steel MIG welds
-
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-467. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2022 Ford F-150 and interchanges with OE parts FL3Z-5E212-G and JL3Z-5E212-N. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-467. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2020 Ford F-150 and interchanges with OE parts FL3Z-5E212-G and JL3Z-5E212-N. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4481691. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2000-2003 BMW M5 and interchanges with OE part 18 30 1 406 812. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.- Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Precision Stamped Collector Design For Optimal Exhaust Flow; Engine Efficiency And Fuel Economy
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Durable 308 Stainless Steel MIG Welds
-
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461132. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2006-2008 Audi A6 Quattro 3.2L. MagnaFlow 5461132 includes (1) Torca Clamp and interchanges with OE parts 4F0 254 504 SX, 4F0 254 554 HX. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461132. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2008 Audi A6 Quattro and interchanges with OE parts 4F0 254 504 SX and 4F0 254 554 HX. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.- Torca AccuSeal® Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force Preventing Pipe Distortion
- Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Durable 308 stainless steel MIG welds
-
The MagnaFlow Jeep Loop Delete 19211 is a 2in. diameter mandrel bent stainless steel pipe that i’s weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Magnaflow Direct-Fit Exhaust Pipe
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Superior flow & performance
- Superior Flow Performance
-
The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15677 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
-
The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15673 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15673’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Magnaflow Competition Series Stainless Cat-Back System
The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15673 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15673 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15673’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive Exterior Sound
Showing 47221–47232 of 70719 results