-
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Semi-Direct-Fit Catalytic Converter 23771. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23771 includes (4) Flat Washers, (2) Nuts, (1) Flat Ring Gasket, (2) Bolts and interchanges with OE parts BP4Y-20-55XC, BP4Y-20-55XF, BP4Y-20-55XG, BP4Y-20-55XH, BP4Z-20-55XC, BP4Z-20-55XF, BP4Z-20-55XG, BP4Z-20-55XH, BP6F-20-55XA, BP6F-20-55XB, BP6F-20-55XC, BP7F-20-55X. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
MagnaFlow HM Grade Semi-Direct Fit Catalytic Converter
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23771 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1999-2005 Mazda Miata and interchanges with OE parts BP4Y-20-55XH and BP4Z-20-55XH, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Durable 308 Stainless Steel Mig Welds
-
The MagnaFlow 2015-2023 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19218 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 3.6L 2015-2023 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19218 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19218’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19218 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High performance lightweight design
- Straight Pipe-Like Sound
-
The MagnaFlow 2015-2023 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19206 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19206 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19206’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19206 is backed by MagnaFlow’s limited lifetime warranty.
Magnaflow Race Series Stainless Axle-Back System
Need further assistance? Call 1-800-990-0905.- Durable Corrosion-Resistant Stainless Steel Construction
- High Performance Lightweight Design
- Straight pipe-like sound
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0512’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2000-2004 Chevrolet S10 4.3L & 2000-2004 GMC Sonoma 4.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 includes (1) 2.5in. U-Bolt Clamp, (1) 2-Bolt Gasket, (2) Nuts, (2) Bolts, (2) 2.25in. U-Bolt Clamps and interchanges with OE parts 15105764, 15105768, 15156939, 15156940, 15758517, 15761479. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0512 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0441 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0441’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 1999-2004 Toyota Tacoma 2.4L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0441 includes (1) Ring Gasket, (2) 2.125in. U-Bolt Clamps, (1) 2-Bolt Gasket, (4) Nuts, (2) Bolts and interchanges with OE parts 17405-0C040, 17405-0C060. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0441 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0718 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0718’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0718 includes (1) 2-Bolt Gasket, (4) 2.25in. U-Bolt Clamps, (2) Bolts, (3) 2.25in. U-Bolt Clamp Hangers, (2) Nuts and interchanges with OE parts 10287874, 10287875, 10291254, 10300198, 10300199, 10300200, 10300201, 10312660, 10312661, 10312663, 10315288, 10315289, 10315290, 10315291, 10345272, 10429453, 10435628, 15144838, 15144842. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0718 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0085 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0085’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2000-2006 Nissan Sentra 1.8L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0085 includes (1) Ring Gasket, (1) 2.125in. U-Bolt Clamp, (1) 2-Bolt Gasket, (4) Nuts, (4) Bolts and interchanges with OE parts 20100-4Z000, 20100-5M020, 20100-6Z515, 20300-5M020, 20300-6Z500. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0085 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Two year, unlimited mileage warranty
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0615 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0615’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2001-2002 Chevrolet Express 3500 5.7L & 2001-2002 GMC Savana 3500 5.7L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0615 includes (1) 3-Bolt Gasket, (3) 3.125in. U-Bolt Clamps, (3) Bolts, (3) Nuts and interchanges with OE parts 15767250, 15767251. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0615 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Leaves all emissions equipment intact, maintaining emissions compliance
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0011’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 includes (4) 2.5in. U-Bolt Clamps, (1) 2.5in. U-Bolt Clamp Hanger, (2) Nuts, (2) Bolts and interchanges with OE parts 15066813, 15101422, 15101424, 15101425, 15101426, 15113052, 15113053, 15113054, 15113055, 15130192, 15130193, 15130194, 15130195, 15232527, 15232528, 15232529, 15232530, 15762251, 15762252, 15762255, 15772910. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0011 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Two year, unlimited mileage warranty
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0185’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2001-2007 Chrysler Town & Country 3.3L & 2001-2005 Dodge Grand Caravan 3.3L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 includes (2) 2.125in. U-Bolt Clamps, (2) 2.25in. U-Bolt Clamps and interchanges with OE parts 4881 332AE, 4881 332AF, 4881 332AG, 4881 332AH, 4881 333AH, 4881 333AI, 4881 333AJ. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0185 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0870 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0870’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0870 includes (2) 3in. U-Bolt Clamps, (3) 2.5in. U-Bolt Clamps, (2) Nuts and interchanges with OE parts 15208739. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0870 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- Two year, unlimited mileage warranty
-
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0722 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0722’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2002-2006 Honda CR-V 2.4L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0722 includes (2) 2in. U-Bolt Clamp Saddle Hangers, (1) Donut Gasket, (1) Spring Bolt Kit, (1) 2in. U-Bolt Clamp, (1) Ring Gasket, (3) Bolts, (3) Nuts and interchanges with OE parts 18030-S9A-A00, 18030-S9A-A01, 18030-S9A-A02, 18030-SCA-A01, 18030-SCA-A02, 18220-S9A-003, 18220-S9A-023, 18220-SCA-E02, 18220-SCA-E03, 18220-SCA-E05. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0722 features durable Aluminized Steel construction and is covered by a 2 year warranty.
BRExhaust Direct-Fit Exhaust System Replacement Kit
Need further assistance? Call 1-800-990-0905.- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
Showing 44737–44748 of 69674 results