-
Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016-2024 Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Wire-reinforced silicone elbow with CNC billet fittings eliminates restrictions and improves and increases airflow capacity
- Provides max gains of 18 whp / 22 wtq while maintaining safe A/F ratios
- No tune required
-
Keep those air intake temps down! With Mishimoto’s Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- 163-percent increase in external fin surface area
- 77-percent increase in internal core volume
- 10F (5.5C) reduction in intake air temp
-
Keep those air intake temps down! With Mishimoto’s Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- 163-percent increase in external fin surface area
- 77-percent increase in internal core volume
- 10F (5.5C) reduction in intake air temp
-
Feed more air to your 2.3L EcoBoost engine in your 2016-2018 Ford FocusRS with Mishimoto’s newly released cold-side intercooler pipe. This design increases the internal volume by 40-percent over its stock counterpart and has a 46-percent pressure drop improvement. With this design, it is flexible enough to make install a breeze yet durable enough to wIt’stand just as much increased boost pressure abuse as an aluminum counterpart. It is constructed of five ply silicone and reinforced with steel wire to prevent any misshaping under vacuum. It is also one solid piece through-and-through, eliminating the need for couplers, because who likes failing couplers that cause boost leaks? This hose will be available in black, come with stainless steel T-bolt clamps and installs in under 30 minutes. Of course, it will also be backed by our coveted Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- Silicone construction absorbs the stresses of excessive engine movement
- 46-percent less pressure drop than stock cold-side pipe
- Improves heat and pressure tolerance
-
Say hello to our intercooler for the 2016-2018 Ford Focus RS! Whether you are a track junkie, occasionally taking your RS for some spirited driving, or making your RS a car to steal the show, this intercooler will suit your needs. Our intercooler has been beefed up with a 36-percent increase in core volume and a 214-percent increase in external fin surface area, which means increased air-cooling efficiency for your RS. Our core reduces air outlet temperature by almost 40-percent while minimizing the inlet/outlet pressure drop across the core, and provides gains of 7hp and 8ft-lbs! This hefty, direct-fit, bar-and-plate core is durable enough to wIt’stand any type of abuse you throw at it, while improving the heat transfer process both at idle and cruising speeds. This intercooler is designed to function with all factory equipment on the 2016-2018 Focus RS as well as our upgraded intercooler pipes. There is no modification necessary for installation, making it a true bolt-on performance part. As with all our parts, this intercooler comes with the Mishimoto Lifetime Warranty. Order yours today!
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- 36-percent increase in internal core volume and 214-percent increase in external fin surface area
- 80-percent increase in core size
- 40-percent reduction in AIT
-
Say hello to our intercooler for the 2016-2018 Ford Focus RS! Whether you are a track junkie, occasionally taking your RS for some spirited driving, or making your RS a car to steal the show, this intercooler will suit your needs. Our intercooler has been beefed up with a 36-percent increase in core volume and a 214-percent increase in external fin surface area, which means increased air-cooling efficiency for your RS. Our core reduces air outlet temperature by almost 40-percent while minimizing the inlet/outlet pressure drop across the core, and provides gains of 7hp and 8ft-lbs! This hefty, direct-fit, bar-and-plate core is durable enough to wIt’stand any type of abuse you throw at it, while improving the heat transfer process both at idle and cruising speeds. This intercooler is designed to function with all factory equipment on the 2016-2018 Focus RS as well as our upgraded intercooler pipes. There is no modification necessary for installation, making it a true bolt-on performance part. As with all our parts, this intercooler comes with the Mishimoto Lifetime Warranty. Order yours today!
High-efficiency intercooler engineered to reduce intake air temperatures for improved power and engine performance. Durable construction ensures optimal heat exchange, consistent boost, and a precise, reliable fit.- 36-percent increase in internal core volume and 214-percent increase in external fin surface area
- 80-percent increase in core size
- 40-percent reduction in AIT
-
Reduce the restriction and add more volume to the flow of charged air in your 2016-2018 Ford Focus RS with the Mishimoto Performance Intercooler Piping kit. We have combined the power of our hot-side and cold-side kits to give you the best airways to and from the intercooler in your Focus RS. Our cold-side pipe is a single section of durable 5-ply silicone, eliminating the need for additional couplers. The improved design is flexible enough to make installation a breeze, and is reinforced with steel wire to stand up to the same abuse as It’s aluminum counterpart. We have also increased the inner diameter of the cold-side pipe, equating to a 31-percent increase in internal volume and a 46-percent increase in flow over the stock piping. Our cold-side piping is available in black and its full potential is unlocked when combined with our hot-side kit. Since the hot-side has more distance to travel, we incorporated a specially designed aluminum mid-section and united it with a pair of dependable silicone couplers, all to make sure your Mk.III RS keeps every precious PSI of boost contained in the system. On top of increasing the diameter to 2.5 inches, our hot-side piping is designed specifically to direct airflow to the front PTU cooler that would be blocked by a traditional piping design. Our air diverting hot-side pipe includes wire-reinforced, 5-ply silicone couplers to ensure a secure connection to the turbo and intercooler. The Mishimoto Performance Intercooler Piping Kit is available in black and includes all the hardware needed for a fortified and direct fitment to your 2016-2018 Ford Focus RS. As with all our products, this kit also includes the Mishimoto Lifetime Warranty.
Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.- 46-percent and 45-percent less pressure drop than stock cold-side and hot-side pipe, respectively
- Silicone couplers absorb the stresses of excessive engine movement
- Improves heat and pressure tolerance
-
Ford has finally graced our American shores with a Focus wielding the RS badge, and we couldn’t be happier. We wanted to improve and upgrade a lot of things on this car and among those priorities had to be an intake. Our engineers have spent many hours in development, performing a plethora of tests and data collection. This Is a full intake, replacing every core component in the OEM system including the airbox and the intake pipe. Our kit includes a 3in, aluminum pipe that routes all the way to the turbo, with all of the necessary bracketry to accommodate a perfect fit.The airbox has a similar design to the stock airbox, facilitating an improvemed pressure drop with an open top, exposing the filter to more air and sealing the box against the hood, keeping it fully enclosed. This airbox uses the factory air inlet ducts, grabbing air right from the front of the car and the ports are surrounded with weather stripping to avoid movement. We have put this intake through hundreds of miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 12 hp and 15 ft-lbs of torque that is safe on a stock tune. Look at our engineering blog for details below! No cutting or modification to factory components will be necessary, this kit is a direct bolt in for the 2016-2018 Ford FocusRS and of course, this product is covered with the Mishimoto Lifetime Warranty
Performance cold air intake kit engineered to increase airflow for improved horsepower and throttle response. Includes high-quality components for enhanced filtration, efficient airflow, and a precise fit.- Air filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 12 whp and 15 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
-
Say hello to our performance intercooler kit for the 2016-2018 Ford Focus RS! Whether you are a track junkie, occasionally taking your RS for some spirited driving, or making your RS a car to steal the show, this intercooler will suit your needs. Our intercooler has been beefed up with a 36-percent increase in core volume and a 214-percent increase in external fin surface area, which means increased air-cooling efficiency for your RS. Our core reduces air outlet temperature by almost 40-percent while minimizing the inlet/outlet pressure drop across the core, and provides gains of 7hp and 8ft-lbs! The hefty, direct-fit, bar-and-plate core is durable enough to wIt’stand any type of abuse you throw at it, while improving the heat transfer process both at idle and cruising speeds.This kit also includes the Mishimoto performance intercooler piping kit to further improve the flow of the charged air through your 2.3l EcoBoost. The piping kit replaces the stock hot-side pipe with our custom design which not only features a 40-percent increase in internal volume, but also is specifically shaped to direct airflow over the stock PTU cooler. Our cold-side pipe features 5-layers of wire reinforced silicone, with a larger diameter to increase the flow of the charged air, but also longevity of your turbocharging system.The Performance Intercooler Kit is available with either a silver or black, and, with all of our products, is covered under the Mishimoto Lifetime Warranty to keep you pushing the limits in your RS for a lifetime.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 36-percent increase in internal core volume and 214-percent increase in external fin surface area
- 46-percent and 45-percent less pressure drop than stock cold-side and hot-side pipe, respectively
- 80-percent increase in core size
-
Say hello to our performance intercooler kit for the 2016-2018 Ford Focus RS! Whether you are a track junkie, occasionally taking your RS for some spirited driving, or making your RS a car to steal the show, this intercooler will suit your needs. Our intercooler has been beefed up with a 36-percent increase in core volume and a 214-percent increase in external fin surface area, which means increased air-cooling efficiency for your RS. Our core reduces air outlet temperature by almost 40-percent while minimizing the inlet/outlet pressure drop across the core, and provides gains of 7hp and 8ft-lbs! The hefty, direct-fit, bar-and-plate core is durable enough to wIt’stand any type of abuse you throw at it, while improving the heat transfer process both at idle and cruising speeds.This kit also includes the Mishimoto performance intercooler piping kit to further improve the flow of the charged air through your 2.3l EcoBoost. The piping kit replaces the stock hot-side pipe with our custom design which not only features a 40-percent increase in internal volume, but also is specifically shaped to direct airflow over the stock PTU cooler. Our cold-side pipe features 5-layers of wire reinforced silicone, with a larger diameter to increase the flow of the charged air, but also longevity of your turbocharging system.The Performance Intercooler Kit is available with either a silver or black, and, with all of our products, is covered under the Mishimoto Lifetime Warranty to keep you pushing the limits in your RS for a lifetime.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.- 36-percent increase in internal core volume and 214-percent increase in external fin surface area
- 46-percent and 45-percent less pressure drop than stock cold-side and hot-side pipe, respectively
- 80-percent increase in core size
-
We here at Mishimoto are very excited to see the first turbocharged Honda engine in the US domestic market. It may be small, but It’s still packs a punch for having a displacement of only 1.5L. The Mishimoto Civic catch can will make sure that your 1.5L turbocharged engine keeps running like it just rolled off the assembly line. The 2-port baffled catch can mounts in the back of the engine bay by means of the included application-specific bracket. The 50 micron bronze filter keeps blow-by from making a mess of your intake tract. This 2016-2021 Civic catch can kit includes direct-fit hoses to make for an easy 30 minute installation. The included Mishimoto Lifetime Warranty ensures that your Civic will always have the protection it needs! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what We’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.
Engine oil catch can kit designed to capture oil vapors and prevent buildup in the intake system. Helps maintain efficiency, reduce carbon deposits, and improve performance with durable components and easy installation.- Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter
- Application-specific bracket mounts the can in a serviceable location
- Installs in under 30 minutes
-
Keep engine temperatures under control on your 10th-gen 1.5T and 2.0L Honda Civic with the Mishimoto Performance Aluminum Radiator. The 10th-gen Civic is an incredible platform for a daily driver, weekend autocross machine, or full track build. However, pushing the stock cooling system reveals it’s one greatest flaw: an underperforming cooling system. To help solve this issue and keep your Civic pushing the limits longer, we’ve designed an extremely precise all-aluminum radiator that provides both enhanced durability and cooling efficiency. The foundation of the Mishimoto Performance Aluminum Radiator is the 36mm-thick two-row core. Our engineers performed extensive testing to create a fin composition that would produce maximum heat transfer. This efficient core is fully TIG-welded to precise aluminum end tanks, which mate perfectly with all factory equipment. Our radiator features a massive 43-percent increase in fluid capacity over stock for increased cooling capacity and endurance on the track or street. In addition, the Mishimoto core design provides a 36-percent increase in external fin surface area to help transfer the heat out of your coolant and into the air. The results are lower coolant temperatures and quicker coolant temperature recovery, making this the ideal upgrade for your 2016-2020 10th-gen Honda Civic 1.5T or 2.0L. This radiator includes a magnetic drain plug to help keep debris from clogging your cooling system, and as with all our products, this radiator includes the signature Mishimoto Lifetime Warranty for a lifetime of performance.
Aluminum radiator engineered for efficient heat dissipation and optimal engine cooling. Precision-fit design ensures easy installation, corrosion resistance, and reliable performance across varied driving conditions.- 36-percent increase in external fin surface area effectively transfers heat out of coolant
- 31-percent increase in core volume for improved cooling capacity
- All-aluminum design with precision TIG-welded end tanks
Showing 41941–41952 of 57879 results