Shop

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452028. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1998-1999 Nissan Frontier and interchanges with OE parts 14002-3S600 and 14002-3S610. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Manifold Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23329. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1998-2001 Ford Ranger 2.5L & 1998-2001 Mazda B2500 2.5L. MagnaFlow 23329 includes (1) Donut Gasket and interchanges with OE parts ZZP0-20-500, ZZP1-20-500, ZZR0-20-500, ZZR1-20-500. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 441117. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1998-2000 Ford Ranger 2.5L & 1998-2000 Mazda B2500 2.5L. MagnaFlow 441117 includes (1) Donut Gasket and interchanges with OE parts ZZP0-20-500, ZZP1-20-500, ZZR0-20-500, ZZR1-20-500. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Magnaflow California Direct-Fit Catalytic Converter
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.

• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
• Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
• Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
• Durable 308 Stainless Steel MIG Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23956. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1998-1999 Saturn SL1, 1998-1999 Saturn SL, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23881. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1998-2002 Toyota Corolla and 1998-2002 Chevrolet Prizm, this direct-fit catalytic converter also interchanges with OE parts 17460-0D030 and 17460-0D040, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23881. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1998-2002 Toyota Corolla and 1998-2002 Chevrolet Prizm, this direct-fit catalytic converter also interchanges with OE parts 17460-0D030 and 17460-0D040, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93397. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2000 Ford F-150 5.4L. MagnaFlow 93397 includes (1) Torca Clamp. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93394. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2000 Ford F-150 4.6L & 1999 Ford F-250 4.6L. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93396. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2000 Ford F-150 5.4L. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93395. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2000 Ford F-150 4.6L & 1999 Ford F-250 4.6L. MagnaFlow 93395 includes (1) Torca Clamp. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Precision Stamped Collector Design For Optimal Exhaust Flow/Engine Efficiency And Fuel Economy
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies installation with essential gaskets and hardware being included in the box
• OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93615 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1996-1999 Chevrolet Express 1500, 1996-1999 Chevrolet Express 2500, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Torca Accuseal Exhaust Clamps Provide A Full 360-Degree Equally Distributed Clamping Force
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 stainless steel MIG welds

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93613 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1996-1999 Chevrolet Express 3500, 1996-1999 Chevrolet Express 1500, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 Stainless Steel Mig Welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49785. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2003 BMW 540i, 1999-2001 BMW 740iL, and more, this direct-fit catalytic converter also interchanges with OE part 18 30 1 437 545. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Not legal for sale or installation in California; Colorado or New York.

• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Mandrel Bent Tubing Retains Oem-Like Design And Geometry
• Durable 308 Stainless Steel Mig Welds